ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
ต่อไป
เล่นอัตโนมัติ
2007-2021 Toyota Tundra Roof Drip Molding InstallationDad Doing Stuff
มุมมอง 58K
2007-2013 Toyota Corolla How to replace Weatherstrip Window Moulding Trim Seal Belt Yiannis PagonisYiannis Pagonis
มุมมอง 155K
Cómo reemplazar molde plástico de puertas Toyota Yaris Sedan 2007-2012alfredobrown
มุมมอง 25K
นี่คือ Texture Pack ที่โคตรจะสมจริงที่สุด!!! #เกมกับshorts #minecraftMrWattana
มุมมอง 71K
Send this to an artist to make them… 🫢✨🎨 #artistomgArtistomg
มุมมอง 15M
How to change Toyota VIOS 2007-2012 NCP93 Weatherstripp1w1e
มุมมอง 23K
How to replace the Toyota Prius C 2013 Roof Weather Strips Left and RightAlexa Evans
มุมมอง 482
Front shocks replacement (Mac Pherson).michaelovitch
มุมมอง 7M
2007-2013 Toyota Corolla How to Clean the Throttle Body and the Idle Air Control Valve PART IYiannis Pagonis
มุมมอง 527K
How to replace roof molding clips - Inspira / Lancer 08TC's Anything Goes
มุมมอง 12K
How to replace Toyota Corolla Front DOOR. Years 2000 to 2022Peter Finn the Car Doctor
มุมมอง 25K
Remover Techo Toyota Corolla 03-08 9th Gen | headliner replacementGarage Toys
มุมมอง 4.1K
2006 Scion XB Roof LeakMech Fix
มุมมอง 12K
HOW TO: Remove/Replace exterior door moulding - 02 to 06 Toyota Corolla ZZE series.Desirable Drives
มุมมอง 4.2K
สุดดยอดการ์ตูนช่อง 9 ที่พลาดไม่ได้ของ ชาโม่คุงOnline Station
มุมมอง 345K
เปิดคำต่อคำ ช่อ-หมอวรงค์ ปมยุบพรรคประชาชน l STORY LIVE EP.43 (HIGHLIGHT)Spring News
มุมมอง 445K
เรอัล มาดริด 2-0 อตาลันต้า | ไฮไลต์ ยูฟ่า ซูเปอร์คัพ 2024 UEFA Super Cup 2024beIN SPORTS Thailand
มุมมอง 663K
女孩妒忌小丑女? #小丑#shorts好人小丑
มุมมอง 10M
เปิดชื่อ เเคนดิเดต นายก หลัง เศรษฐา พ้นตำเเหน่ง | 14 ส.ค. 67 | เปิดปากกับภาคภูมิTHAIRATH TV Originals
มุมมอง 600K
LISA - NEW WOMAN feat. Rosalía (Official Music Video) reaction [NEW LEVEL!]Captain Korea
มุมมอง 86K
"ชัยเกษม" ไม้ต่อเต็งหนึ่ง นั่งเก้าอี้นายกฯ คนที่ 31 | คลุกวงใน ถามตรงถามจริง HighlightAmarin Variety
มุมมอง 123K
Thanks, I am happy I found your channel.
So welcome to my channel my friend
Thank you so much for sharing this video. I was lost how to install the new parts which I had received from the OEM dealership.
Great. Thank you so much once again.
You are welcome my friend and I wish you good installation and god be with you. And don't forget to live, love and learn!
I didn't know I could buy those parts. Nice way to refresh the car. Thank you!
All you have to do is change them, my friend, and then you will see the difference in your car 😮😮
Well done explaining and showing the step by step procedure.
Thank you my friend 🙏🙏
Marvelous good job we need
more people like you God Bless.
Thank you very much my friend and always be well 😊😊😊
Yiannis as always nice job 👌🏽👌🏽👌🏽👊🖐😎
Thank you my friend German Fernandez 😉😉😉
Καλημερα Ιωαννη επανερχομαι τελικα δεν ειχα θεμα με καδενα ....ηταν η τροχαλια που εχει πανω τα λουρια απο δεξια πλευρα την αλλαξα ολα ενταξει .Επισης εχω το ιδιο θεμα με τον νεροχυτη πανω απο τον οδηγο και μενα εχει ξεκολλησει το πισω κλιπς χαχα ευχαριστουμε για το εκπληκτικο βιντεο θα προβω σε αντικατασταση των κλιπς Να εισαι καλα καλη Ανασταη σε σενα και την οικογενεια σου .........
Έλα Βαγγέλη, Χριστός Ανέστης, Χρόνια Πολλά με υγεία, προσωπική και οικογενειακή. Χαίρομαι που τελικά βρήκες και έλυσες το πρόβλημα σου. Και 'γω έχω έναν περίεργο ήχο (μόνο όταν δουλεύει στο ρελαντί) στην πλευρά του ιμάντα των τροχαλιών, που ίσως να είναι το ίδιο με το δικό σου, κάποια τροχαλία προφανώς.
@@YiannisPagonis 100+30εργατικα μαζι με την φλατζα του οχι στην τουοτα
αν βαλεις σε σβηστο κινητηρα ενα κατσαβιδι μακρυ και κοντραρεις την τροχαλια θα καταλαβεις αν εχεις μπαλατζαρισμα οποτε θες αλλαγη ισως να υπαρχει και μια μικρη διαρροη λαδιου ισωςςςςςς Να προσεξεις το βαρος της να ειναι ιδιο με αυτη που θα βαλεις
basarili video tesekkurler toyota candir
teşekkürler arkadaşım ❤❤❤❤❤❤
Thanks a lot Yiannis for another useful video.
You are welcome Lia. Παρακαλώ και να είσαι καλά.
Very informative
Very educative
Kindly enlighten me if it's possible to change:
1. instrument cluster without tachometer with one that has
2. Manual climate controls to digital one
for a Toyota Corolla 2010.
Thanks!
I do not think that what you are asking for can be done. I'm so sorry about that!
Hello thanks for the vid also I live in South Africa Johannesburg and I have the aczact same car thx for the vid! I also have the 2008 Toyota Corolla professional 1.4
Hello my friend from Johannesburg. I am from Lesbos, a Greek island on the border with Turkey. We have the exact same car. My car was manufactured in South Africa in 2008
Great video! Which side of the Roof Drip Molding goes in the front? There is one end that is more angled and the other is more straight or 90 degrees to the long sides of the molding.
It appears the more angled end goes towards the rear and the less angled end goes towards the front.
Usta 7 sene bu aracın Aynısını kullanıyorum kilima gazını hiç değiştirmedim Ama soğuk üflüyor sizce değişmesi gerekiyormu teşekkür
GREAT JOB,MATE
Thank you 🙏 my friend ❤
Meraba Yiannis video için çok teşekkür ederiz. TH-cam kanalında araç motor temizliğine dair videonu göremedim. Senin videolarında araç motoru parçaları fabrikasından yeni alınmış gibi çok temiz. Motor parçaları temizliğinde kullandığın malzemeler nelerdir?
Müsait olduğunda bir video da bunun için çeker misin?
Bir de en çok yıpranan kapı fitillerinin değişiminin videosunu çeker misin?
Σε ευχαριστώ πάρα πολύ. Kolay gelsin.
You are doing amazing job! You think it is so important which way clips are facing? I just ordered one of this and want to make sure. Front clip forward direction and back clip backward?
Hello my friend and thank you very much. Yes, it is very important in which direction these 2 clips should face, because if they are placed in the wrong direction then it is easy to separate (disconnect) the roof drip from the clip, e.g. in case you wash your car with a pressure washer machine or more generally if pressure is applied to these 2 connection points. The correct way is the one I show in the video or front clip forward and rear clip backwards.
Γειά σου Γιαννη αφου γραφεις τους κωδιμους απο τα ανταλλακτικα βαλε και τις τιμες ΛΠ απονοπου τα πηρες για να ξερουν αυτοι που ψαχνουν αναλογα υλικα τι τους συμψερει οικονομικα. ΚΑΛΟ ΠΑΣΧΑ ΚΑΙ ΚΑΛΗ ΑΝΑΣΤΑΣΗ
Γειά σου Γιώργο και καλό Πάσχα. Ο λόγος που δεν αναφέρω τις τιμές αυτών των ανταλλακτικών είναι διότι οι τιμές γνήσιων ανταλλακτικών της Toyota είναι πολύ διαφορετικές από ηλεκτρονικό κατάστημα σε κάποιο άλλο ηλεκτρονικό κατάστημα του εξωτερικού. ΑΛΛΑ ΠΡΟΣΕΞΕ: ΑΥΤΟΣ που πουλάει στην χαμηλότερη τιμή έχει πολύ υψηλό κόστος μεταφοράς και αντίστροφα, οπότε δεν μπορώ να προτείνω σε κάποιον να αγοράσει από το τάδε ηλεκτρονικό κατάστημα μιας και τα έξοδα μεταφοράς από χώρα σε χώρα είναι τελείως διαφορετικές.
@@YiannisPagonis Γιαννη , πλήν του κινητήρα ολα τα υπόλοιπα τα φτιάχνουν άλλοι πχ δυναμος σε συσκευασία ΤΟΥΟΤΑ έχει μια Α τιμή ο ίδιος απο τον κατασκευαστή(DENCO) έχει αλλή τιμή ,αυτό εννοώ.
@@geopap1965 Σίγουρα Γιώργο θα ξέρεις ότι ένα οποιοδήποτε αυτοκίνητο δεν κατασκευάζεται 100% από την ίδια την εταιρία αλλά πολλά συστήματα-εξαρτήματα γίνονται από άλλες συνεργαζόμενες εταιρίες με προδιαγραφές που ορίζει η κατασκευάστρια εταιρία αυτοκινήτου, γιατί προφανώς αυτό της συμφέρει περισσότερο. Τώρα βέβαια κυκλοφορούν και τα after market ανταλλακτικά (με τον ίδιο κωδικό αριθμό) που είναι σαφώς πιο οικονομικά αλλά ταιριάζουν και είναι αξιόπιστα;
Γιώργο χρόνια πολλά με υγεία για την ονομαστική σου εορτή.
Hola.... para un toyota yaris sedan año 2017 mecesito la moldura y clips de cierre para la moldura ¿ cuales son esos codigos de piezas?
Amigo para poder encontrar estos 2 repuestos que deseas para tu auto tendrás que decirme el VIN (Identificación del vehículo Número). ¿Cuál es?
Hey bro y eso clik donde va laqueado los trae o los venden separados
Te refieres al clic del techo?
yianni, what if u never replace the old, destroyed roof trim (leave it off)? i cant see how water can ever go inside the car.
What is the purpose of drip molding?
The roof drip molding will protect your cabin and window channels from collecting unwanted water which could lead to more problems.
What is roof Moulding?
Roof moldings are decorative components that serve to cover gaps between roof panel and the side panels. These moldings are installed on a vehicle by being fitted into clips at the front and rear ends of the body roof and by being subjected to the reaction force applied by the molding lips to the body.
It is considered. Please explain how to clean the internal air conditioning refrigerator🌷🌷🌷
How to Clean Your AC Unit Inside
1. Turn Off the Power to the Air Conditioner
Air conditioners have a lot of moving parts, and because safety is paramount, you should turn off the power at your breaker box. This means you won’t have any lights, so this is definitely a daytime project. If your indoor unit is somewhere dark, like the attic, you will want to set up adequate lighting.
2. Open Up the AC Unit
Your blower unit will have a door to the evaporator coil. Depending on your unit, you might have to remove foil duct tape. There are often a few bolts or screws holding the door in place.
3. Clean the Air Conditioner Evaporator Coils
If you have a soft brush, use it to remove dust from the coil. This dust will consist of whatever particulates populate the inside of your home. This includes skin cells and sometimes pollen, so if you’re prone to allergies, you may want to wear a mask. The best cleaning solution is a no-rinse coil cleaner you can buy at your local home improvement store. This spray foams up and then drips into the unit’s drain pan, taking dirt and dust with it. Spray the foam on as evenly as you can, and get it in all the small areas you can’t reach by hand. The best time to do this is on a warm day, so that when you turn the unit back on, the AC condensation rinses off the coils.
4. Clean the AC Drain Pan
Once the coil cleaner has completely done its job, clean out the drain pan. Soap and hot water are a good place to start, and bleach helps with sanitization. Go for a 50/50 mixture of bleach and water. Pour the solution down the drain to make sure it’s clear. If you want a longer-term way to keep your drain from growing algae, you can purchase AC drain pan tablets at most home improvement and hardware stores.
5. Clear the Air Conditioner Drain If It Is Plugged
If your bleach solution washes easily down the drain, you can skip this step. If it’s sluggish, your drain may be plugged. Without regular cleaning and maintenance, mold and algae can build up in the drain. It’s usually a PVC pipe around an inch wide, so it doesn’t take much buildup to clog. Your drain may end outside, often around the condenser unit. Otherwise, it will let out into a utility sink or a drain in the basement floor. If your unit is in the attic, it may drain down one of your exterior walls. Follow the drain to where it ends and bring a wet/dry vacuum with you. If you are concerned about soiling the filter, you can remove it from the vacuum. Take the vacuum hose and hold it to the end of the drain tube. You can prevent air leakage by holding a towel around the gap. If you want the tightest seal, duct tape the hose and drain together. Turn on the vacuum and let it run for two or three minutes to clear out any buildup that has accumulated.
6. Close the AC Access Panel Reattach the access panel, using the same screws you took out in the beginning of the procedure. If you have HVAC metal foil tape, use it to seal the top and bottom of the access panel. Don’t cover up the manufacturer’s label, as a technician may need it to perform maintenance or make repairs on the unit. This is all you need to do for a regular cleaning, but you may encounter challenges you can’t handle on your own. If you have A-frame evaporator coils, you may find parts you can’t access because the coils are enclosed on both ends. If you haven’t cleaned your A-frame coils in a while, there’s a good chance you will need to enlist the help of professionals to get them completely clean.
1. افصل الطاقة عن مكيف الهواء
تحتوي مكيفات الهواء على الكثير من الأجزاء المتحركة ، ولأن السلامة هي الأهم ، يجب عليك إيقاف تشغيل الطاقة في صندوق التكسير. هذا يعني أنه لن يكون لديك أي أضواء ، لذلك هذا بالتأكيد مشروع نهاري. إذا كانت وحدتك الداخلية في مكان مظلم ، مثل العلية ، فستحتاج إلى إعداد الإضاءة المناسبة.
2. افتح وحدة التيار المتردد
سيكون لوحدة المنفاخ الخاصة بك باب لملف المبخر. اعتمادًا على وحدتك ، قد تضطر إلى إزالة الشريط اللاصق. غالبًا ما يكون هناك عدد قليل من البراغي أو البراغي التي تثبت الباب في مكانه.
3. تنظيف ملفات مبخر مكيف الهواء
إذا كان لديك فرشاة ناعمة ، فاستخدمها لإزالة الغبار من الملف. سيتكون هذا الغبار من أي جسيمات تنتشر داخل منزلك. يشمل ذلك خلايا الجلد وأحيانًا حبوب اللقاح ، لذلك إذا كنت عرضة للحساسية ، فقد ترغب في ارتداء قناع.
أفضل حل للتنظيف هو منظف ملف بدون شطف يمكنك شراؤه من متجر تحسين المنزل المحلي. يتطاير هذا البخاخ رغوة ثم يقطر في وعاء تصريف الوحدة ، مع أخذ الأوساخ والغبار معه. رش الرغوة بالتساوي قدر المستطاع ، واحصل عليها في جميع المناطق الصغيرة التي لا يمكنك الوصول إليها يدويًا.
أفضل وقت للقيام بذلك هو في يوم دافئ ، بحيث عندما تقوم بتشغيل الوحدة مرة أخرى ، فإن تكثيف التيار المتردد يشطف الملفات.
4. نظف وعاء تصريف مكيف الهواء
بمجرد أن يقوم منظف الملف بعمله تمامًا ، قم بتنظيف حوض التصريف. يعد الصابون والماء الساخن مكانًا جيدًا للبدء ، ويساعد التبييض في التعقيم. اذهب لمزيج 50/50 من المبيض والماء. صب المحلول في البالوعة للتأكد من أنه نظيف. إذا كنت تريد طريقة طويلة الأمد لمنع استنزاف الطحالب من نمو الطحالب ، يمكنك شراء أقراص تصريف التيار المتردد من معظم متاجر تحسين المنزل والأجهزة.
5. نظف مصرف مكيف الهواء إذا كان مسدوداً
إذا كان محلول التبييض يغسل بسهولة في البالوعة ، يمكنك تخطي هذه الخطوة. إذا كان بطيئًا ، فقد يكون الصرف مسدودًا. بدون التنظيف والصيانة المنتظمة ، يمكن أن يتراكم العفن والطحالب في الصرف. عادة ما يكون أنبوب PVC بعرض بوصة واحدة ، لذلك لا يتطلب الأمر الكثير من التراكم حتى يسد.
قد ينتهي تصريفك بالخارج ، غالبًا حول وحدة المكثف. خلاف ذلك ، سوف يدخل إلى حوض المرافق أو الصرف في الطابق السفلي. إذا كانت وحدتك في العلية ، فقد تستنزف أحد جدرانك الخارجية. اتبع المصرف إلى حيث ينتهي وأحضر معك مكنسة كهربائية رطبة / جافة. إذا كنت قلقًا بشأن تلويث المرشح ، فيمكنك إزالته من الفراغ.
خذ خرطوم التفريغ وثبته حتى نهاية أنبوب التصريف. يمكنك منع تسرب الهواء عن طريق وضع منشفة حول الفجوة. إذا كنت تريد إحكامًا شديدًا ، فقم بشريط لاصق على الخرطوم وصفيهما معًا. قم بتشغيل المكنسة الكهربائية واتركها تعمل لمدة دقيقتين أو ثلاث دقائق لإزالة أي تراكم قد تراكم.
6. أغلق لوحة الوصول AC
أعد تركيب لوحة الوصول ، باستخدام نفس البراغي التي قمت بإخراجها في بداية الإجراء. إذا كان لديك شريط رقائق معدني HVAC ، فاستخدمه لإغلاق الجزء العلوي والسفلي من لوحة الوصول. لا تغطي ملصق الشركة المصنعة ، فقد يحتاجه الفني لإجراء الصيانة أو إجراء إصلاحات على الوحدة.
هذا كل ما عليك القيام به للتنظيف المنتظم ، ولكن قد تواجه تحديات لا يمكنك التعامل معها بنفسك. إذا كان لديك ملفات مبخر على شكل حرف A ، فقد تجد أجزاء لا يمكنك الوصول إليها لأن الملفات محاطة بكلا الطرفين. إذا لم تكن قد قمت بتنظيف ملفات الإطار A الخاصة بك منذ فترة ، فهناك فرصة جيدة لأنك ستحتاج إلى الاستعانة بمساعدة المحترفين لتنظيفها تمامًا.
Excelente amigo Yiannis ☝🏾
Muito obrigado, meu amigo 😁😁😁😁
Yiannis usta 7 yıldır toyota corolla 1.6 comfort 2008 kilima gazını hiç yenilemedim bi sıkıntı olurmu değişmeye ihtiyaç varmı sizce
Klima sisteminiz için R134a soğutucu (freon) mu demek istiyorsunuz? Klimanızı şarj etmek için mi?
7 senedir aracı kullanıyorum klima gazını hiç değiştirmedim bir problem olur mu
@@fatihcerrah3443 Hayır, bir sorununuz olmadığı sürece gerekli değildir. Soğutucuyu yenisiyle yenilemek için soğutucuyu değiştirmek elbette en iyisi olacaktır. Arabam 14 yaşında ve kliması çok iyi çalıştığı için hiç değiştirmedim.
THANK YOU
You are welcome my friend😊
Полезно спасибо!
Не за что мой друг
nice video ! The clip on my yaris that you glued on is missing can i order a replacement if so do you know the name and part number?
Yes you can my friend. If you tell me your VIN Number (Vehicle Identification Number), then I will tell you the part number of this clip. I will look it up based on your VIN so we can be 100% sure it is this part and fits your car perfectly. My email is: pagonis33@gmail.com
@@YiannisPagonis oh wait a second is the clip that you glued onto the frame car the same clip that you clipped onto the drip molding?
@@bsty1ez NO these 2 clips are different from each other (clip door belt moulding and clip roof drip dide finish moulding), they are not the same
@@YiannisPagonis oh ops so which part number is the clip that you glued onto the car mine is missing on my car . thanks
@@bsty1ez You are welcome my friend and have a nice night (12:54 after midnight)
Tanks
You are welcome my friend 🙏🙏
What type of glue can I use
You can use instant strong glue or 2-component glue, after first cleaning the 2 bonding surfaces very well
Me ahorre un dinero en la colocacion
God bless you my dear
May I know what does roof drip side finish mould do? Thanks
What is the purpose of drip molding?
The roof drip molding will protect your cabin and window channels from collecting unwanted water which could lead to more problems.
@@YiannisPagonis thank you
@@YiannisPagonis what do i do if my seal if broken and there is water already collected down there?
@@coco-mj9pe You are welcome my friend
@@dawsn6 Which of the 2 sealants do you mean?
Κύριε γιάννη που μπορούμε να βρούμε αυτά τα γνήσια ανταλακτικά?
Φίλε μου μπορείς να τα βρεις είτε απευθείας από την ίδια την Toyota (από εξουσιοδοτημένο συνεργείο της Toyota, όπως έκανα εγώ), είτε από το διαδίκτυο με βάση τους αριθμούς ανταλλακτικών (Part Number)
Καλησπέρα Γιάννη ψάχνω ακριβώς αυτά τα δύο λάστιχα για yaris 1.33 , 2012 μοντέλο, αλλά δεν γνωρίζω τον κωδικό, μήπως μπορείς να βοηθήσεις; ευχαριστώ πολύ!
Καλημέρα φίλε μου. Ναι ευχαρίστως να σε βοηθήσω αρκεί να μου πεις μόνο τον αριθμό πλαισίου για να μπορέσω πιο εύκολα να το βρω
A nail biter
Please where is the location of charcoal canister in this vehicle
Next to the rear tire on the left
@@saeedsaleh6784 I couldn't find it. I also checked the other rear side
The charcoal canister or vapor canister is located under the vehicle, very close to the fuel tank. It is hidden under plastic covers, so it can be difficult to locate it.
1. REMOVE CHARCOAL CANISTER ASSEMBLY
(a) Disconnect the fuel tank vent hose from the charcoal canister assembly.
(b) Disconnect the vapor pressure sensor connector.
(c) Disconnect the wire harness clamp.
(d) Disconnect the purge line hose from the charcoal canister assembly.
(e) Disconnect the charcoal canister filter sub-assembly from the charcoal canister assembly.
(f) Remove the 3 bolts and charcoal canister.
2. INSPECT CHARCOAL CANISTER ASSEMBLY
(a) Visually check the charcoal canister for cracks or damage. If cracks or damage are found, replace the charcoal canister assembly.
(b) Check charcoal canister operation.
(1) With the purge port closed, blow 1.10 kP a (11.2 gf/cm2 , 0.16 psi) of air into the vent port, and check that air flows from the air inlet port. If the result is not as specified, replace the charcoal canister assembly.
(2) With the vent port closed, blow 1.10 kPa (11.2 gf/cm 2,0.16 psi) of air into the air inlet port, and check that air flows from the purge port. If the result is not as specified, replace the charcoal canister assembly.
(c) Check for air leakage.
(1) With the purge port and air inlet port closed, apply 19.6 kPa (0.2 kgf/cm2, 2.81 psi) of press urized air into the vent port, then confirm that pres sure is retained for 1 minute. If the result is not as specified, replace the charcoal canister assembly.
3. INSTALL CHARCOAL CANISTER ASSEMBLY
(a) Install the charcoal canister assembly with the 3 bolts.
Torque: 19 N·m (194 kgf·cm, 14 ft·lbf)
(b) Connect the charcoal canister filter sub-assembly to the charcoal canister assembly.
(c) Connect the purge line hose.
(d) Connect the wire harness clamp.
(e) Connect the vapor pressure sensor connector.
(f) Connect the fuel tank vent hose to the charcoal canister assembly.
@@YiannisPagonis please can you attach a photo to guide me to the exact location.
@@inemesitekop4168 Okay my friend I will do it, just send me your email
Ποσο κόστισε το λάστιχο της οροφής Γιάννη;;
Αν θυμάμαι καλά φίλε μου γύρω στα 40 € το ένα (το γνήσιο) ή αν προτιμάς υπάρχει και το aftermarket που κοστίζει σαφώς λιγότερο (Part number 75556-02110)
www.aliexpress.com/i/1005004662858363.html
@@YiannisPagonis σ ευχαριστω πολύ !!
@@giwrgosgiann278 Παρακαλώ φίλε μου. Εάν χρειαστείς οτιδήποτε εγώ εδώ είμαι για να σε βοηθήσω!
😝😝😝😝😝😝
😎😎😎