=> Next Video HMI Design and Simulation of Automatic Door Open Close th-cam.com/video/p5rsrpAM5Q8/w-d-xo.html => PLC HMI Courses automationcommunity.com/
Very good sir. I also created this project by himself for practice before u uploadedwith extra feature with auto manual and manual open close button dunction
X1 and X3 in rung 1 are “software interlocks” to prevent forward and reverse from being energized at the same time. In a real application, you would use a software interlock along with a mechanical interlock and an electrical interlock to provide three stages of safety to prevent short circuit when using a reversing contactor. But the example in this video is not actually usable as is on physical equipment only on software/ virtual based application.
=> Next Video HMI Design and Simulation of Automatic Door Open Close
th-cam.com/video/p5rsrpAM5Q8/w-d-xo.html
=> PLC HMI Courses
automationcommunity.com/
Sir can u give training of plc HMI and scada
Thxu for the great knowledge, am learning engineer, I enjoy automation, and ur tutorials
you are very good thank you i learn some logic
very goooooooood
EXCELENT video very good.
Thank you.
Very good sir. I also created this project by himself for practice before u uploadedwith extra feature with auto manual and manual open close button dunction
Very interesting and helpful video
Ok Is good, but isnt good use to Y out as paraller kontakt. Is Ideally changed for internal Merker.
Very good session sir
why u used T0 , you should explain addressing of T0
Thank you great video
Thanks 👍
What are the components are needed for this?
Tell me anyone. I need to Do this project.
Similar programme being employed for Metro trains.
Sir can u explain why did u take x1 and x3 as normally close and in series as when x0 is pressed they will still in close comdition
X1 and X3 in rung 1 are “software interlocks” to prevent forward and reverse from being energized at the same time. In a real application, you would use a software interlock along with a mechanical interlock and an electrical interlock to provide three stages of safety to prevent short circuit when using a reversing contactor.
But the example in this video is not actually usable as is on physical equipment only on software/ virtual based application.
☺️ 𝙥𝙧𝙤𝙢𝙤𝙨𝙢