You're in the Midwest?... What city... I'm in the Midwest too... Madison Wis...I own a 89 fox body and a S550 GT...I have the 5lug 17" 94 cobra wheels.
Bro I can stare at your car all day .... I remember back in 93 I was just a kid we visited my uncle in LA and my cuz had a 88 fox gt wide ass wheels built motor going 10s NA and I remember going in an out the garage just to stare at my cuz car it was addictive and satisfying and today I have one of my own 🙏🏻
What I had to do to fit my 315 m/t’s the inner fender wall curves in tight. And they indefinitely run into the slicks. Buttttt. It’s a lip.. you can notch that metal out with a basic cut off wheel and re weld grind the weld down and you can fit a bigger tire. Regardless yes. You have to buy a fender roller to roll that fender lip. You can buy one at harbor freight for like 60 bucks… works fairly well. And you ditch that gas quad shock. You don’t need it. You already have a two control arms holding the diff. Not like your gonna lose ur differential going down the road lol. Also Don’t go too much on the fender roller.. otherwise you might fuck up your paint.
Just bought these same wheels (but in 8.5 wide 245 size) my front hubs stick out too far and the wheels have too thin of a base to them. I dont want to run spacers, how can I make them work?
Great video I got an 1986 SVO I want to now what’s the biggest I can put in the rear I know you don’t like the quad setup but I hate to remove it just would like a little more beef My rims are the stock 16x7 They have 205/50/16 all the way around If you can help thank you Great Car you have enjoy
Beautiful car man, don’t park it under that limb growing towards the street @ 1:16 . That’s a bad union at the trunk and it could snap and crush your whip.
Man I have so many questions this was helpful for the suspension but I want to kno could I have 5.8 fit in there . Because I have a gt500 I love my car but I miss my stick. I was going to try and get gt500 but a good one is 40k plus modding I am looking at paying the same as my 2020 gt500 not what I am tryna do. But I can find tons of stock 5.8 motors . And I'm falling in love with these notches more and more.
Its been done I seen a 5.4 gt500 swapped fox its physically same size as the 5.8. Matter of fact i would recommend doingba 5.4 swap with a blower swap you can get close to the same results as the 5.8 even when both are built there isnt much difference performance wise but there is a huge difference in price. The iron block 5.4 is stout and much cheaper to replace but it is heavier obviously. You could also do an aluminum 5.4 from an 11-12 but theyre quite a bit more expensive than the iron block ones but not as expensive as the 5.8. The only downside to the iron block is weight as far as how tough it is its as good/better than the aluminum blocks. Just some food for thought. If you dont care about spending alot more money for not much more performance by all means go for the 5.8. Search foxcast medias videos i beleive it was him who showed the 5.4 gt500 swapped fox.
I had a set of 315 Nitto 555R on a 17X9 that fit like yours in the back. I went to the Mikey SS like you, but in a 275 and they work great (400-450hp 393 NA) With your power level you need to have a 15 incher with some sidewall and give up some looks lol...oh, and the Flowmaster pipes out the back have a bunch more room. Your tires are rubbing the exhaust when you turn and the rear is moving ever so slightly left/right. Great video, thanks.
quick question i have a 03 cobra with a whipple . so ur engine bay is pretty much the same as mine . how do you feel about washing your engine bay ? and if u do what's the process that u do?
@@BuiltVSBought thank you, I see you are running 18inch wheels. I also got 18 inch wheels. Did you have to use any spacers I heard not all coil overs work with 18 inch wheels
Wow i cant belive it were neighbors. I live by farrell rd and bruce.saw your vids and noticed alot by me .i have an 03 cobra.Hanz was talking about your car when i had mine dynoed.
I really appreciate all the information you're helping a lot of blue oval people out here. And I would like to know about your paint I have a hatch LX t-top and it is black also. But yours is a deep color appreciate any information that you can share long live the foxes!
@@885.0ELopez THey are the only chrome set in the world as I had them chromed. I am not trying to ship them so they would have to be picked up. Asking $1600 for them
I’m pretty satisfied with my staggered 10th Anniversary Cobra wheels from LMR with some Cooper tires I got from Tire Rack. Running 275’s in the rear. It looks pretty awesome. Have no rubbing. Fenders not rolled, but with no quad shocks. Hey but don’t get me wrong your set up looks kick ass!! 👍🏻
Good info, I totally agree that rolling your fenders are a must, from personal experience...... back in the day I had drag lights with ET Streets, didn’t have the fenders rolled, pulling out of a gas station, suspension compressed on the drivers side, sliced the sidewall. When a wrinkle wall goes flat, it’s on the ground!
so you think white person is better huh?Maybe you should read revelation 1:14,15.skin like burned bronze is black not white!!your white jesus is false!!The Hebrew son of the most high is BLACK!!!!
@@drfaticus sorry to inform you but burt brass shines like silver and is closer to white. And jesus is a Jew and not white or black. The church is represented as a black woman in song of Solomon and yes the first convert was black outside of the Jewish community....but Jesus wasnt isn't black,grow in grace and knowledge of the truth.
@@woundedfox5109 sorry to inform you,that Jesus is a HEBREW not a jew.Hebrew is the original,and jew is a type of the original.The original man is black,or a man of color.Whites came after the fact.Look at the paintings on the wall of the pyramids to see how they looked then.So now you can go expand and learn something!!
Irregardless is NOT a word. I think you meant regardless. I know it’s your channel. Just saying
Not sure if you mentioned it, but what tire size are you running?
Thanks
Awesome car
Not sure why someone making a video about tire and wheel combo wouldn’t say what spec tires you’re running, Um ya this is how wide my wheels are. Lame
Let’s see your video on the proper way to do it
@@BuiltVSBought lol, well at least mention wheel AND tire specs, almost like they are one in the same.
Have you had any issue with the front wheel hitting the coilover.
Not one time
Good informational video, these are the kind of videos that are needed in the community.
The other fox bodies were so much more forgiving with wide tires (Tbird, LSC... ) Yet we still force them on the Mustang 🔨 👨🏾🏭 🔧 👍🏾
Had 315 35 17 on the rears. No tails no quad shock. Car is lowered. Put it back to a stockish size 17x8 all the way around.
You're in the Midwest?... What city... I'm in the Midwest too... Madison Wis...I own a 89 fox body and a S550 GT...I have the 5lug 17" 94 cobra wheels.
WHERE IS THE EVENT???... YOU MENTION EVERYTHING ABOUT IT BUT LOCATION AND TIMES.
Beautiful Car Big Homie"
# 92 Fox 347 Stroker EFI
Thank you so much
Bro I can stare at your car all day ....
I remember back in 93 I was just a kid we visited my uncle in LA and my cuz had a 88 fox gt wide ass wheels built motor going 10s NA and I remember going in an out the garage just to stare at my cuz car it was addictive and satisfying and today I have one of my own 🙏🏻
Love all your videos, that fox is amazing 👏, im in process of building 2 i need all the help I can get
I understand
What I had to do to fit my 315 m/t’s the inner fender wall curves in tight. And they indefinitely run into the slicks. Buttttt. It’s a lip.. you can notch that metal out with a basic cut off wheel and re weld grind the weld down and you can fit a bigger tire. Regardless yes. You have to buy a fender roller to roll that fender lip. You can buy one at harbor freight for like 60 bucks… works fairly well. And you ditch that gas quad shock. You don’t need it. You already have a two control arms holding the diff. Not like your gonna lose ur differential going down the road lol. Also Don’t go too much on the fender roller.. otherwise you might fuck up your paint.
Just bought these same wheels (but in 8.5 wide 245 size) my front hubs stick out too far and the wheels have too thin of a base to them. I dont want to run spacers, how can I make them work?
I would like to have the same engine you have where can I get it
It’s not something that is readily available. I got mine from somebody I knew
I found a set of 18x9.5 for fronts and 18x11 for the rears but was wondering what size tires your running on the front and back?
When you removed the quad shocks, did you trim the bolt off as well? OR did you just simply remove the quad shocks and that was it?
you have probably one of the nicest Foxes i’ve ever seen
I appreciate you.
True
I have 10" square fitment on my fox and the quad shocks are still on and no rubbing in frt or back.
That’s a brutal looking notch bud. Where do I get the wheels ( brand). Thanks.
Is that the Cobra Terminator motor? Liking the tires but not really the rims. No offense.
Hell yes it is lol and it has a 3 liter whipple on it does like 700 on pump gas.
What size fire hawks are you running up front?
I believe 245 but I have to go check
Great video
I got an 1986 SVO
I want to now what’s the biggest I can put in the rear
I know you don’t like the quad setup but I hate to remove it just would like a little more beef
My rims are the stock 16x7
They have 205/50/16 all the way around
If you can help thank you
Great Car you have enjoy
Good video What size tire front and back
Beautiful car man, don’t park it under that limb growing towards the street @ 1:16 . That’s a bad union at the trunk and it could snap and crush your whip.
You have the cleanest Fox on the internet. Looks like you could eat off that engine!
Great video love your car and that paint is flawless
Thanks so much
With a 10” wheel you need a 6.5” bs and a 10.5” wheel is slightly more but not much. AJE k members are the best.
Will twenty's go on with no problem?
In the beginning of your build someone told me you have a tubular front clip. Is the accurate?
Yes I took the stock one off
Your shit is so official you should have 500k subs
Man I have so many questions this was helpful for the suspension but I want to kno could I have 5.8 fit in there . Because I have a gt500 I love my car but I miss my stick. I was going to try and get gt500 but a good one is 40k plus modding I am looking at paying the same as my 2020 gt500 not what I am tryna do. But I can find tons of stock 5.8 motors . And I'm falling in love with these notches more and more.
Its been done I seen a 5.4 gt500 swapped fox its physically same size as the 5.8. Matter of fact i would recommend doingba 5.4 swap with a blower swap you can get close to the same results as the 5.8 even when both are built there isnt much difference performance wise but there is a huge difference in price. The iron block 5.4 is stout and much cheaper to replace but it is heavier obviously. You could also do an aluminum 5.4 from an 11-12 but theyre quite a bit more expensive than the iron block ones but not as expensive as the 5.8. The only downside to the iron block is weight as far as how tough it is its as good/better than the aluminum blocks. Just some food for thought. If you dont care about spending alot more money for not much more performance by all means go for the 5.8. Search foxcast medias videos i beleive it was him who showed the 5.4 gt500 swapped fox.
What is the method you used to roll your fenders?
Used a fender roller. I think Lmr might sell it
The season never end in Florida.
I had a set of 315 Nitto 555R on a 17X9 that fit like yours in the back. I went to the Mikey SS like you, but in a 275 and they work great (400-450hp 393 NA) With your power level you need to have a 15 incher with some sidewall and give up some looks lol...oh, and the Flowmaster pipes out the back have a bunch more room. Your tires are rubbing the exhaust when you turn and the rear is moving ever so slightly left/right. Great video, thanks.
quick question i have a 03 cobra with a whipple . so ur engine bay is pretty much the same as mine . how do you feel about washing your engine bay ? and if u do what's the process that u do?
Yea no water on the engine for me just spray and polished
How do these hook for you versus the Toyos ?
Go with the Toyos
More information about your brake set up, did you roll your fender yourself?
What kind of coil overs are you running ?
Viking
@@BuiltVSBought thank you, I see you are running 18inch wheels. I also got 18 inch wheels. Did you have to use any spacers I heard not all coil overs work with 18 inch wheels
Wow dude you really put this mustang together nice. Love those wheels. What are they?
They are Aodhan DS05 but I had them chromed
@@BuiltVSBought love them
Cleanest and best looking fox ive seen in a while. Stuffing a cobra 32v in it makes it probably the most interesting. Nice job
Appreciate the video. A little bummed out but I might have to do all that extra work to add some 10 inch wheels in the back.
Wheel talk went out the window once you popped the hood... 😍 dammmmm
Great informative video. Beautiful notch.
Thanks for the great info and I appreciate it 🔊🔥🔥🔥🔥🔥
Broo are you in Chicago? I need assistance
Are you still running c-clips in rear? Welded axle tubes?
Does anybody know the offset on his wheels?
Plus 22
@@BuiltVSBought Thanks for the reply. Would you happen to know the width of those front wheels?
Wow i cant belive it were neighbors. I live by farrell rd and bruce.saw your vids and noticed alot by me .i have an 03 cobra.Hanz was talking about your car when i had mine dynoed.
Hanz is great and he helped me tremendously with this process
@@BuiltVSBought we should meetup sometime get some pictures love the vids man.
I love the mini tub mod.
That's one pretty ride. Looks like mega bucks put into it. Video quality is A. Got to subscribe and go back over your videos
Yea just don't tell the wife LOL
Beautiful car!!awsome stang!
Video fire as always
Wide tires look sooooo good on a Fox
Your paint looks nice man , subscribed
Great informative video! Car is absolutely gorgeous.
Congratulations on your subscriber's enjoy all the different content
Thank you for watching I really appreciate it
I may have missed it but what are the tire sizes? Sick car
Beautiful car brother!
Thank you
I really appreciate all the information you're helping a lot of blue oval people out here. And I would like to know about your paint I have a hatch LX t-top and it is black also. But yours is a deep color appreciate any information that you can share long live the foxes!
Pon su títulos en español en tus videos están muy buenos
That was good info, I think wheel questions are what I get the most as well.
Yes because you are a reputable source.
Where at in Illinois. I own 2 foxes, I'm in mokena IL
Evergreen Park
you are the main reason i am getting ds05s on my fox i love your car fav fox ever
You are too kind. Thanks bro
Beautiful ride!
Hopefully you can make it to Ford Takeover in May of next year.
Ford Takeover is the one show that I know I’m going to make
I swear your videos always give me motivation to not sell my notch and keep working on it
Don't do ittttttttt
Love your fox man,
There is more to come stay tuned and thank you
I need and want them wheels let me know r they for sale ??
Everything is for sale lol
@@BuiltVSBought do u have a link or what r u looking to get for the wheels??
@@885.0ELopez THey are the only chrome set in the world as I had them chromed. I am not trying to ship them so they would have to be picked up. Asking $1600 for them
@@BuiltVSBought damn that’s a pretty good deal.. that is with tires or no tires??? What state u from r u anywhere near California???
Nope in Illinois no tires
Keep up the great work! Be blessed🙏🏾
Great info and content bro as always !
Chad you already know Im trying LOL
I’m pretty satisfied with my staggered 10th Anniversary Cobra wheels from LMR with some Cooper tires I got from Tire Rack. Running 275’s in the rear. It looks pretty awesome. Have no rubbing. Fenders not rolled, but with no quad shocks. Hey but don’t get me wrong your set up looks kick ass!! 👍🏻
If you had 305's then you would have to roll them. 275's work well with your setup
Quad shocks won't fit with 17" - 275's?
Keep bringing the good content brother 💯
Keep on watching and thanks
"I BLEED BLUE"
All day
Good info, I totally agree that rolling your fenders are a must, from personal experience...... back in the day I had drag lights with ET Streets, didn’t have the fenders rolled, pulling out of a gas station, suspension compressed on the drivers side, sliced the sidewall. When a wrinkle wall goes flat, it’s on the ground!
Good stuff thx for sharing 👍🏽
Thanks for watching
who ever painted that car dont know what they are doing. lol,. thats a nice car. you know what would make it nicer. a white guy driving it....
Imagine making that comment and hiding your name.
so you think white person is better huh?Maybe you should read revelation 1:14,15.skin like burned bronze is black not white!!your white jesus is false!!The Hebrew son of the most high is BLACK!!!!
@@drfaticus sorry to inform you but burt brass shines like silver and is closer to white. And jesus is a Jew and not white or black. The church is represented as a black woman in song of Solomon and yes the first convert was black outside of the Jewish community....but Jesus wasnt isn't black,grow in grace and knowledge of the truth.
@@woundedfox5109 sorry to inform you,that Jesus is a HEBREW not a jew.Hebrew is the original,and jew is a type of the original.The original man is black,or a man of color.Whites came after the fact.Look at the paintings on the wall of the pyramids to see how they looked then.So now you can go expand and learn something!!