Huawei Mate 20 Lite Lcd Screen Replacement

แชร์
ฝัง
  • เผยแพร่เมื่อ 28 ก.ย. 2024
  • How to Change Display HUAWEI Mate 20 Lite Full Video
    For any help join Mobile Service groups Page- / mobileservice.fr

ความคิดเห็น • 88

  • @beklanaze
    @beklanaze 4 ปีที่แล้ว +40

    Does the playing card have to be the 6 of Diamonds? I only have the Queen of Spades.

    • @MonkeyDLuffy-zv8sg
      @MonkeyDLuffy-zv8sg 3 ปีที่แล้ว +4

      I use the King of Hearts for better cutting through the glue around the corners

  • @valicfu
    @valicfu 3 หลายเดือนก่อน

    Thank you, I am DYI guy and with you video I succeed replace my display so easily.

  • @serenachantelwilson
    @serenachantelwilson ปีที่แล้ว +1

    great tutorial, you saved me so much money thanks so much

  • @ewoudt
    @ewoudt 5 ปีที่แล้ว +7

    Good vidd. Ive fixed mine! (b7000 glue from Suxun)

  • @maciekuanowicz828
    @maciekuanowicz828 5 ปีที่แล้ว +15

    Hi, which hotair temperature should i use for this operation? edit: 100 celsius was enough ;)

    • @laletrangere3305
      @laletrangere3305 4 ปีที่แล้ว

      thx

    • @mhvdm
      @mhvdm 4 ปีที่แล้ว

      It literally says in the beginning of the video.

    • @ZanSedej
      @ZanSedej 4 ปีที่แล้ว

      i use 50 celsius and all is good

    • @timstiphout7556
      @timstiphout7556 4 ปีที่แล้ว

      Is IT possible with a normale fohn

    • @francescomanca5183
      @francescomanca5183 2 ปีที่แล้ว

      @@timstiphout7556 yes it is abot 4min

  • @rjanechannen3513
    @rjanechannen3513 7 หลายเดือนก่อน +1

    thank you.mine works fine now.👍👍👍

  • @DjIgnas95
    @DjIgnas95 3 ปีที่แล้ว

    Thank you!

  • @ivanmikulic9596
    @ivanmikulic9596 3 ปีที่แล้ว

    Can i use anything else instead of glue?

  • @premn7725
    @premn7725 4 ปีที่แล้ว +2

    Does this factory reset everything?

    • @HegozZz
      @HegozZz 4 ปีที่แล้ว +1

      No

  • @Jaden_Huang
    @Jaden_Huang 4 ปีที่แล้ว

    Hello do you reply to your own comments

  • @ikarosjimsky
    @ikarosjimsky 4 ปีที่แล้ว

    When I put the new screen it doesn't fit very well. I think it is the glue which I am trying to remove but it's not very easy. I have removed most of it but still doesn't sit well and there is a little gap 😔

    • @jemlagulos9406
      @jemlagulos9406 3 ปีที่แล้ว

      I think you applied too much glue

  • @reacey
    @reacey 4 ปีที่แล้ว

    I'm looking for some advice, my sister has the honor 20, does anybody know if the honor 20 lite lcd is compatible with the honor 20? Thankyou to anyone who can help me

  • @emanuelguadamuz2785
    @emanuelguadamuz2785 3 ปีที่แล้ว

    What's the name of the tool use it for heating?

  • @bismankanwal8417
    @bismankanwal8417 3 ปีที่แล้ว

    I want repair my mob Huawei mate 20 lte

  • @muhammadahmadakbarmalik2854
    @muhammadahmadakbarmalik2854 5 ปีที่แล้ว

    Is that will work while changeing black screen

  • @SexxXyBoy22
    @SexxXyBoy22 5 ปีที่แล้ว

    Perfectl tutorial thanks !

  • @MrSchamane1
    @MrSchamane1 3 ปีที่แล้ว

    GUTE ARBEIT!!

  • @yv78paris
    @yv78paris 5 ปีที่แล้ว +1

    מה שם החברה של הדבק ?
    21/5000
    What is the name of the glue company?

    • @MOBILESERVICE123
      @MOBILESERVICE123  5 ปีที่แล้ว +2

      Glue T-8000
      Thank you for watching my video

  • @TahirGurashi
    @TahirGurashi 5 ปีที่แล้ว +8

    Just brilliant. Thanks.

  • @harisqsquad
    @harisqsquad 4 ปีที่แล้ว +3

    What kind of glue is this? Does any glue work?

  • @carlosvipe2765
    @carlosvipe2765 2 ปีที่แล้ว +2

    Yes . . . . . a professional work! (The video, too. Even the background sound is pleasant).

  • @raimonds7269
    @raimonds7269 5 ปีที่แล้ว +5

    how much cost this LCD sreen for mate 20 lite??

    • @Maurice2
      @Maurice2 5 ปีที่แล้ว

      £29 around that it is very easy thanks to this vid

    • @raimonds7269
      @raimonds7269 5 ปีที่แล้ว

      @@Maurice2 i want buy this screen

    • @Maurice2
      @Maurice2 5 ปีที่แล้ว +1

      @@raimonds7269 then go on the world wide web and look it up

    • @Maurice2
      @Maurice2 5 ปีที่แล้ว

      did it for u www.amazon.co.uk/Kozyshow-Compatible-Digitizer-Display-Repairing/dp/B07QLX4S59/ref=asc_df_B07QLX4S59/?tag=bingshoppinga-21&linkCode=df0&hvadid={creative}&hvpos={adposition}&hvnetw=o&hvrand={random}&hvpone=&hvptwo=&hvqmt=e&hvdev=c&hvdvcmdl={devicemodel}&hvlocint=&hvlocphy=&hvtargid=pla-4583520386195716&psc=1
      put that into the bar at the top where it says youtube paste it there btw this is £26

  • @dienepientje
    @dienepientje 4 ปีที่แล้ว +3

    Thank you for this video.

  • @robytigers
    @robytigers 5 ปีที่แล้ว +4

    woww disconnection of flex cable with a metal clamp ?? !!

    • @Jaoryx
      @Jaoryx 4 ปีที่แล้ว +1

      Doesn't matter since there is no electricity

    • @notlatif6214
      @notlatif6214 4 ปีที่แล้ว +1

      B2S AspecT I think he was concerned about breaking it

  • @enessaidsezer898
    @enessaidsezer898 5 ปีที่แล้ว +4

    great tutorial, worked out perfectly. watch out for the antenna cable though, i cut mine by accident and had to replace it with a cable from another phone.

    • @youtubeyolk
      @youtubeyolk 5 ปีที่แล้ว +1

      Which one is the antenna cable? Going to attempt this repair for a friend on the weekend.

    • @reacey
      @reacey 4 ปีที่แล้ว

      I ripped off the antenna connector and had to solder the wire back onto the circuit board (nightmare)

    • @MonkeyDLuffy-zv8sg
      @MonkeyDLuffy-zv8sg 3 ปีที่แล้ว

      @@reacey just buy a new one

    • @reacey
      @reacey 3 ปีที่แล้ว

      @@MonkeyDLuffy-zv8sg what a new phone? Instead of taking half an hour to repair it, no thanks

    • @MonkeyDLuffy-zv8sg
      @MonkeyDLuffy-zv8sg 3 ปีที่แล้ว

      @@reacey no I meant a new antenna connector

  • @teemuali-raatikainen7856
    @teemuali-raatikainen7856 3 ปีที่แล้ว +1

    what glue should i use??

  • @AngelPecica
    @AngelPecica 3 ปีที่แล้ว

    What a fucking screw up ideea from Huawei, to put the display connector on the back of the phone... They could just put the connector on the front, so you would simply take only the display off, connected, and then glue back again...

  • @jonathanwillaume8280
    @jonathanwillaume8280 4 ปีที่แล้ว +1

    does the type of glue really matter?

  • @thevoiceoftherain641
    @thevoiceoftherain641 2 ปีที่แล้ว

    Do you have to use 6 of diamonds or it can be any other card 😆

  • @seriousCADninja
    @seriousCADninja 3 ปีที่แล้ว

    what if the touch screen doesn't work at all? how do i turn it off before proceeding?

  • @rozbitesklo6349
    @rozbitesklo6349 4 ปีที่แล้ว

    Dirty jog. Customers don't see how much glue have under LCD :D

  • @Al-sx4uq
    @Al-sx4uq 2 ปีที่แล้ว

    Hi please could you advise me on what glue i need , is it just a standard plastic glue ??? many thanks

  • @micmos99
    @micmos99 4 ปีที่แล้ว

    Why waiting 5 mins for the glue?
    Idk what glue I have so what shall I do when I have superfastglue?

  • @Julian-bs9dr
    @Julian-bs9dr 2 ปีที่แล้ว

    Así paso el mio solo que el golpe no fue tanto pero si se quebró un poco la posterior negra y arriba del teléfono se ve como blanco y nose que es!

  • @keskingoldgmbh2662
    @keskingoldgmbh2662 4 ปีที่แล้ว +1

    perfect danke

  • @dannyal2023
    @dannyal2023 3 ปีที่แล้ว

    Do i have 2 take the back off? Or is it só the batery is disconected?

  • @miltondecastro3282
    @miltondecastro3282 3 ปีที่แล้ว

    Where can I get these keys or alternatives?

  • @gtx3249
    @gtx3249 5 ปีที่แล้ว

    Salut mon mate 20 lite est tombé dans l'eau et l'écran ne marche plus mais tout le reste si son vibreur etc... vaut t'il la peine d' être réparé ??

  • @jordankramer4367
    @jordankramer4367 4 ปีที่แล้ว

    I hate the music never use it again

  • @vernondavis7077
    @vernondavis7077 3 ปีที่แล้ว

    When I have done this I can't seem to separate the speaker at the top of the front screen from the screen. On the vid it looks like this stays connected to the middle section of the phone but it seems to be connected to the screen itself on my phone even though I have got the same model number as above (could it be different in the UK?). Any ideas?

    • @momolacoste874
      @momolacoste874 2 ปีที่แล้ว

      He heated it very much and it melted the edhesive i guess

  • @3082goku
    @3082goku 4 ปีที่แล้ว

    Didn’t understood why you have to wait 5 minutes after you put the glue ????????!
    Can you answer me
    Thx

  • @MrLisaganesh
    @MrLisaganesh 4 ปีที่แล้ว

    Bedankt voor de film.

  • @arturgjoni8881
    @arturgjoni8881 4 ปีที่แล้ว

    Neat!! I like it

  • @yosoyg8857
    @yosoyg8857 5 ปีที่แล้ว

    How much do you charge for fixing my Mate 20 lite?

  • @workouteverycorner
    @workouteverycorner 5 ปีที่แล้ว

    why you didnt mention that there is a bezel between phone and screen
    ?

    • @workouteverycorner
      @workouteverycorner 5 ปีที่แล้ว

      @Mindaugas MAKX its one to see it and second to know its a bezel that should stick to the phone not screen

  • @4iiiN
    @4iiiN 5 ปีที่แล้ว

    Thx a lot ! very good video !

  • @Nedialkata1
    @Nedialkata1 4 ปีที่แล้ว +2

    Extremely good tutorial and nice to watch ,thanks for the video !

  • @chrissiebee79
    @chrissiebee79 5 ปีที่แล้ว

    Can I use a hairdryer if I haven't got one of those gun things?

    • @beamdels
      @beamdels 4 ปีที่แล้ว

      Do you have an answer to that?

    • @HegozZz
      @HegozZz 4 ปีที่แล้ว

      Yes you could, just try til you're abel to pull out the screen.

  • @erickmgmusic
    @erickmgmusic 4 ปีที่แล้ว

    Great tutorial

  • @andresmogollon8455
    @andresmogollon8455 5 ปีที่แล้ว

    Hi Where I can to buy the display?

    • @SK-qk4kn
      @SK-qk4kn 5 ปีที่แล้ว +1

      Ali Express is where I got mine... Didn't realise I needed the glue though.

  • @onebeatmusicof6078
    @onebeatmusicof6078 4 ปีที่แล้ว

    Thanks bro! Good tutorial. All working :)

  • @michaelbmw1931
    @michaelbmw1931 5 ปีที่แล้ว +1

    Very professional replacement. Thank you. I will try do the same.

  • @valeriolagulos1338
    @valeriolagulos1338 3 ปีที่แล้ว

    That phone is diff though, is that crack deep? Mine had a corner crack and a spot of dead pixels appeared...
    Edit: if you don't have a heat gun, a hair dryer is best... If the temp of your hair dryer is 100° c, heat it for 5 mins. Mine worked brilliantly, I just save a hundred dollars on removing the screen...

  • @raneemomar256
    @raneemomar256 4 ปีที่แล้ว

    Great video
    From where can I get the new screen??
    Can you give me the link please??

    • @beamdels
      @beamdels 4 ปีที่แล้ว

      Do you have an answer to that pls ?

    • @redady4855
      @redady4855 4 ปีที่แล้ว +1

      @@beamdels amazon for example