I had to add a detector rail and 2 additional Redstone torches below the original one. When the mine cart goes over the detector rail it will turn off the powered rail just long enough to get the cart to start unloading instead of it relaunching a full cart.
For those who may think this does not work in Bedrock 1.19, you need to make sure the minecart is going slower. Once I removed a powered rail, it was able to drop an item off before leaving the rail. It was too fast beforez
For anyone with the problem of the minecart leaving as soon as it gets to the station, here's what I was messing up: The powered rails touching the block the minecart runs into SHOULD NOT be powered on when the mine cart is not there. Meaning NO RED STONE TORCHES activating them. I had my beginning powered rails activated with a torch so that's why the cart never fully stopped.
@@bababab-rad Make sure the beginning rails are not powered. So do not put redstone around them. The block that the minecart stops at should have an UNPOWERED powered rail next to it. The rail will automatically power when the cart gets to the block. So just make sure there is no redstone torches or blocks powering that first rail. Just remove them.
I found the fix for all the issues everyone is having, drop the last 2 blocks down, place another hopper going into the original with a powered rail on that, this fixed the not stopping and going through blocks issues
very simple system, it works well. also, a word of warning. Don't put a second hopper underneath the first one. it pulls the items out as soon as they come in, so the powered rail always stays on.
Why does it only work with a small amount of items like im building a bambo farm and there are many bambo so when the minecart reaches the unloader it hits the powered rail(and goes the other way) before the comparater can sense that items are being unloaded and turns off the rail so the minecart is too fast but i dont have this problem when they were only a few, so how do i fix it?
So everything works. Dumps all the items in, repeaters go on when it empties to signal the railing to go back and yeah. However the issue is that my minecart after emptying everything just sits there. For some reason, it still thinks it needs to go in that direction I guess of the wall? Basically it won’t return without a push and it’s frustrating idk how to work it
my minecart hopper never stops on the hopper ever with multiple stacks of items in it, if i manually drop stacks of items on the hopper it turns off ... I am so confused
What about if you wanted it to go the other way. Say the you have an INPUT chest above, with either a hopper minecart or a hopper beneath feeding into a minecart with chest. How to you get the minecart to stop and fill up until either it is full OR the chest it's withdrawing from is empty?
If you have the problem that the items don't fall inside the hopper, ensure that 1) the hopper is facing the chest; place it "on" the chest and 2) there is no redstone cube just besides the hopper.
I have a problem. The redstone isnt quick enough and what i mean by that is that the comparator turns off the redstone torch to slowly and the minecart leaves before it turns off
I didn’t find a great solution, but one that kind of works. I added about 4 unpowered activator rails leading up to the powered rail. This slowed my mine cart down just enough for it to unload properly every one in ten laps or so. I have an iron farm, so honestly I’m considering just taking the minecart hopper system out and using a bunch of hoppers instead.
The hopper under the powered rail has to output on side, not straight down. Also don't pull items with other hopper from it, empty it in a single chest then pull items from that chest to your storage, etc. Use also 2 powered rails, not one.
NOTE: If you have a hopper under the hopper that has the minecart on it, the system will NOT WORK. Make sure that their is no hopper under the hopper with the minecart because the comparator will send a Redstone signal to that one as well. (I think that's what it does)
I spent so much time on hypixel skyblock so I could get my cactus farm to travel to the storage section, turns out it was wasted because minecarts arent allowed. Great tutorial though!
It has been verified to work too many times to count. The most common problem people have is they don't put an UNPOWERED rail between the powered rail on top of the hopper and the rest of the line.
Thank god there's still youtubers who explain these things for people with smooth brains like me without any time wasting even in 2022.
I had to add a detector rail and 2 additional Redstone torches below the original one. When the mine cart goes over the detector rail it will turn off the powered rail just long enough to get the cart to start unloading instead of it relaunching a full cart.
For those who may think this does not work in Bedrock 1.19, you need to make sure the minecart is going slower. Once I removed a powered rail, it was able to drop an item off before leaving the rail. It was too fast beforez
thank you that was my exact problem
I have a powered rail 12 block away and still does not stop
Doesn't work if the hopper goes to another hopper because it empties too fast to register on the comparator.
do you have a better one? If I can't have deep storage, what's the point?
@@JulianSloman I just feed that first hopper into a single chest then put hopper stack under that chest feeding into double chests. Works perfectly.
It does work if you put only 2 power rails in the end and the start and make it 10 blocks long.
@@AmateurEditz7no it doesnt
I built and understood it just from the thumbnail.. 10/10, watched the video anyway because you deserve the view
Thanks for actually explaining the mechanism, I've struggled to figure this out but your step-by-step worked :)
For anyone with the problem of the minecart leaving as soon as it gets to the station, here's what I was messing up: The powered rails touching the block the minecart runs into SHOULD NOT be powered on when the mine cart is not there. Meaning NO RED STONE TORCHES activating them. I had my beginning powered rails activated with a torch so that's why the cart never fully stopped.
So how did you fix it
i fixed it with removing the block above redstone torch
@@bababab-rad Make sure the beginning rails are not powered. So do not put redstone around them. The block that the minecart stops at should have an UNPOWERED powered rail next to it. The rail will automatically power when the cart gets to the block. So just make sure there is no redstone torches or blocks powering that first rail. Just remove them.
I found the fix for all the issues everyone is having, drop the last 2 blocks down, place another hopper going into the original with a powered rail on that, this fixed the not stopping and going through blocks issues
Thank you! Works like a charm, and I love how you explained things. That I still don't understand redstone is down to me, not you!
Doesn’t for me when I put the Minecraft on the track it doesn’t go
Such a simple design, I love it!
Thanks Dan!
My Minecraft doesn’t work …
Mine just goes back and forth even with items in the hopper minecart
im on bedrock and it just drops off one at a time any ideas
very simple system, it works well.
also, a word of warning. Don't put a second hopper underneath the first one. it pulls the items out as soon as they come in, so the powered rail always stays on.
Yep. I have an older video that shows a hopper minecart system that pulls out the resources faster.
Wish I saw this sooner lol
Why does it only work with a small amount of items like im building a bambo farm and there are many bambo so when the minecart reaches the unloader it hits the powered rail(and goes the other way) before the comparater can sense that items are being unloaded and turns off the rail so the minecart is too fast but i dont have this problem when they were only a few, so how do i fix it?
So everything works. Dumps all the items in, repeaters go on when it empties to signal the railing to go back and yeah. However the issue is that my minecart after emptying everything just sits there. For some reason, it still thinks it needs to go in that direction I guess of the wall? Basically it won’t return without a push and it’s frustrating idk how to work it
Same issue. I did a loop and it won't start after it's empty. I think this only works if the minecart ends against a wall.
I can confirm. I just removed the loop and made it end at a block on both ends and it works well that way.
There was an incident with a ghast farm and thanks to this I somewhat understand that the issue was and fixed the track so thanks
You're welcome
my minecart hopper never stops on the hopper ever with multiple stacks of items in it, if i manually drop stacks of items on the hopper it turns off ... I am so confused
The minecart doesn't stop to pick up all of the items. Is it able to do that?
My mine cart just hits the back wall where the hopper is and only drops one item in the chest and then comes straight back down how do I fix ?😊
lower the hopper by 1 block and add another hopper next to it (also with a powered rale)
thanks, now i have to think how can i assemble this with a very unusefull project i got XD connecting all farms with mi storage room XD
Anyone have the issue with it just not stopping with items and when lowering the hopper by 1 just going through the block ?
I do. I’m working to try and fix it now. I’ll get back with you
@@JdunnXD any updates? This is happening to me as well.
@Tinker77 thoughts?
doesnt work for me in java it just keeps on going on the other direction
Thanks for this design. This will work perfectly for my build (a netherite mine transport system). I'll give you kudos on my stream!
What about if you wanted it to go the other way. Say the you have an INPUT chest above, with either a hopper minecart or a hopper beneath feeding into a minecart with chest. How to you get the minecart to stop and fill up until either it is full OR the chest it's withdrawing from is empty?
i can't get it to work, it will stop when i put stuff in the hopper on the ground, but it dosen't stop when there is something in the cart.
Its uploading 1item only at a time minecart is nit stopp at hopper for long time what should i do
If you have the problem that the items don't fall inside the hopper, ensure that 1) the hopper is facing the chest; place it "on" the chest and 2) there is no redstone cube just besides the hopper.
man i hought this would be so mutch harder thx!
Hey there tinker! Thanks for signing my Xbox 360 Minecraft it meant a lot to me! :) I believe it was at a minecon
I'm not able to put a rail on top of the hopper. It just opens the hopper instead. Any way to get around this? (playing on XBOX, btw)
Crouch and place a rail
I have a problem. The redstone isnt quick enough and what i mean by that is that the comparator turns off the redstone torch to slowly and the minecart leaves before it turns off
I'm having the same issue!! I can not figure it out
I didn’t find a great solution, but one that kind of works. I added about 4 unpowered activator rails leading up to the powered rail. This slowed my mine cart down just enough for it to unload properly every one in ten laps or so.
I have an iron farm, so honestly I’m considering just taking the minecart hopper system out and using a bunch of hoppers instead.
same problem here. i'm trying hard to find a solution.
The hopper under the powered rail has to output on side, not straight down. Also don't pull items with other hopper from it, empty it in a single chest then pull items from that chest to your storage, etc. Use also 2 powered rails, not one.
Same problem here.
How far away does it work? Would it go 2 or 300 blocks? Do you have to be near it to start the unloading?
I imagine as far as your render distance. So whatever you have your chunk render distance set to.
NOTE: If you have a hopper under the hopper that has the minecart on it, the system will NOT WORK. Make sure that their is no hopper under the hopper with the minecart because the comparator will send a Redstone signal to that one as well. (I think that's what it does)
MVP, thx.. it was bugging me
thank you, this resolved my problems.
thx
I spent so much time on hypixel skyblock so I could get my cactus farm to travel to the storage section, turns out it was wasted because minecarts arent allowed. Great tutorial though!
i need help, when i put the minecart on the redstone rails, it just doesnt work?
On normal rails you need to push. If powered rails they need redstone that is active.
@@Tinker77the tracks are activated. Minecart still doesn’t not work.
Ty man I appreciate it! Happy Halloween
Amazing! Just a tip, if you thing it is to slow, use to hopers and a double chest!
Extremely helpful! Thank you for being so detailed
Very cool, i appreaciate the tutorial, quick and simple. Helped me a lot.
Why does it not work on my realm 😢
This worked amazingly thank you so much for the tutorial!!!
this was first designed by impulseSV several years ago fyi
Thank you for this :3
very good video hellped a lot, ty very much
awesome sauce!!!!
Does this not work anymore?
It should. I will do another tutorial on it soon and will verify.
Thank you😐👍
You're welcome
Thanks for the straight forward clear explanation of the Redstone.
thanks for the tutorials qwq
very informativ very nice thank you
My Minecart doesn’t even move…
i have no idea how it works but i know how to build it so thats good
Thank you so much
thanks for the explanation
You're welcome
+rep Good guy :) thank you very much for the explanation.
awesome thanks so much
Does not work
It has been verified to work too many times to count. The most common problem people have is they don't put an UNPOWERED rail between the powered rail on top of the hopper and the rest of the line.
Oh god i was trying with observers 😂
thanks:)
Tysm
It's so simple a monkey could do it! Cool!!!😎
This is impulse design
Danke schon or sum like that
Thanyou beautiful?
I have tried 7 ways from sunday and this is NOT working for me... not sure what is missing
try putting the chest under the hopper instead of in front of it like in this video. It wasn't working until I tried that
my signals are not toggling.
hi why does my hopper minecart does not stay to empty? its reaches the unloader without unloading items then quickly goes back on the track
Probably because the track on top of the hopper is being powered by the rest of the track. There needs to be a break.
Did that, still doesn't work