What I look for, and never see, is someone who actually sees how much power the turbine can generate. All the videos I have seen just deal with a motor with no load. I would be really interested to find out how efficient Tulsa turbines really are.
@@SomeGuy-tz8dz just for you I think I’ll see if I can put a airplane prop on it for a load test. I have a marine test tub for engines. If you look in my videos you will see it. I think the turbine would make a mess with it. 😅
Sorry it took me some time to set up a dynamo on the turbine. It maxed out the dynamo on 7:1 underdrive. @5300rpms 10VDV @ 10watts No load 12VDC Max current 2.4amp The turbine was not maxed out.
In real stem plants they reuse the steam up to 3 times. They heat the exhaust in a super heater. You reheat the exhaust by running in the boiler flue then reuse it in a turbines second stage. The Titanic reuse the exhaust from two triple expansion engines to run a turbine. The turbine range the center prop.
Sorry it took me some time to set up a dynamo on the turbine. It maxed out the dynamo on 7:1 underdrive. @5300rpms 10VDV @ 10watts No load 12VDC Max current 2.4amp
I don’t ask you or him to come look at my videos. But here your are starting to bother me. Get all this started over a TOY. But you’re in your right mind, right?
It would be a more biologic way to affect the weather than geoengenieering does today if we all uses such a kind of Evaporator. No Aluminium, No Barium, no silver iodide needet for :) Let us take our blue sky back :)
@@joshclark121987 around 45psi if the steam isn’t too wet. You will not have to open the valve on the boiler all the way. Depending on how dry the steam is the valve could be barely cracked open for full operation.
The sound of this is so nice, I like the reduction gears to ! Good work 👍
Wow, I bet the slowest shaft has monster torque! Beautiful boiler too, lagging looks great!
It’s hard to stop and It works better under load in most app.
Has potential to propel an aircraft carrier up to 100 knots....contact the US Navy. 😅
This is an off the shelf turbine. I have one, without the reduction gearbox and its a good piece of kit. Works well on compressed air also.
Where..?
Where from ?
Microcosms
@@mooniedizzel6443 Thank you
Tanx...👻
Un hélicoptère à vapeur peut être 😅 combien de tour par minutes se serait intéressant de voir combien d'électricité vous pouvez tirer de cette turbine
Hi great , cheers Roy
i need to see your set up a little better . have you done any testing for power output or rpm s ?
No I have not tested the rpms yet. I have been using the turbine to test the out put of my boilers. I will show you a few setups in closer detail.
th-cam.com/video/W3dmjqFDWU0/w-d-xo.html
Here is the turbine on a little 3” P.m. research boiler. It’s not doing to bad to be such a small boiler.
What I look for, and never see, is someone who actually sees how much power the turbine can generate. All the videos I have seen just deal with a motor with no load. I would be really interested to find out how efficient Tulsa turbines really are.
It works better under load believe it or not. I could hook it up to a electric motor and see how many watts it can produce.
@@mooniedizzel6443 I would most certainly look forward to those result 👍
@@SomeGuy-tz8dz just for you I think I’ll see if I can put a airplane prop on it for a load test. I have a marine test tub for engines. If you look in my videos you will see it. I think the turbine would make a mess with it. 😅
Sorry it took me some time to set up a dynamo on the turbine. It maxed out the dynamo on 7:1 underdrive.
@5300rpms
10VDV @ 10watts
No load 12VDC
Max current 2.4amp
The turbine was not maxed out.
I wonder if the steam exhaust could be recycled into a closed loop steam cycle 🤔
In real stem plants they reuse the steam up to 3 times. They heat the exhaust in a super heater. You reheat the exhaust by running in the boiler flue then reuse it in a turbines second stage. The Titanic reuse the exhaust from two triple expansion engines to run a turbine. The turbine range the center prop.
Thanks 👍🏽 sorry about the earlier reply. I was responding to another post. 🤪
Yes... Condensation recovery... That too will require more thought and work...
Rankine cycle, regenerative rankine cycle
Rev/min?
where did you get the turbine? please PM
Microcosm.
Can you tell us where you purchased your turbine? Looks good btw.
eBay or microcosms.
How many kw can you get out of it.
Sorry it took me some time to set up a dynamo on the turbine. It maxed out the dynamo on 7:1 underdrive.
@5300rpms
10VDV @ 10watts
No load 12VDC
Max current 2.4amp
What turbine configuration is this is it Tesla or some other type.
It’s has a normal impeller.
Funny , the guy gave you a compliment and told you your steam engine was what is needed and you call him names? You must not be in your right mind.
Don’t even try it. He tried to trash the fact the engine was from China.
I don’t ask you or him to come look at my videos. But here your are starting to bother me. Get all this started over a TOY. But you’re in your right mind, right?
Did a search no find...🤔 A link to maybes..?😜
www.microcosm-engine.com/live-steam-turbine-engine-multistage-reduction-group-jbb-p-142.html#.Y1aqcCUpAWM
My thanks...👻👻👻🤠😜
@@jamiewhale5317 th-cam.com/users/shorts_PO2TIgv_20?feature=share
It would be a more biologic way to affect the weather than geoengenieering does today if we all uses such a kind of Evaporator. No Aluminium, No Barium, no silver iodide needet for :) Let us take our blue sky back :)
And if there would be a way to boild water with just a little form of energy and strong magnets the Aluminium still could take in a "green" place ;)
btw.. some guys know where "the circle closes" ;)
Is it the Tesla turbine?
No.
I need
th-cam.com/users/shorts_PO2TIgv_20?feature=share
Power???
Steam
Tesla is the fastest
No sir.
Have you done a load test on it
Yea I have a small clip of it running a dynamo, hooked to a boost buck converter. I dropped the volts to 5.5 and use it to charge any usb device.
th-cam.com/video/KLLDRD6yv_g/w-d-xo.htmlsi=4U68DlufHgRZpIFM
How big and what psi would be needed for a 3500w generator
@@joshclark121987 around 45psi if the steam isn’t too wet. You will not have to open the valve on the boiler all the way. Depending on how dry the steam is the valve could be barely cracked open for full operation.
@@joshclark121987 10v 2.4 amps 10watts is all my dynamo will put out.