Subwoofer and Amp Install on a Factory Head Unit - 04 Mazda 3
ฝัง
- เผยแพร่เมื่อ 26 ส.ค. 2024
- Hello World!
In this tutorial, i show you how to install a subwoofer amplifier in a car with a factory head unit. This will work for any amp and any subwoofer. This tutorial is specific to an 04 Mazda 3s, however, it is similar to almost all cars. I am using 8 gauge wiring in the video. Make sure you get a diagram of your factory wiring harness to attach the LOC too. Also make sure you tap into the front speakers, NOT the rear ones.
ENJOY THE BASS!!
_______________________________________
Music used: Remember the Dreams by Per Kiilstofte machinimasound...
Licensed under Creative Commons Attribution 4.0 International (creativecommons...)
For someone who is actually concerned, I've performed this installation on my mazda 3:
-The negative is the Green and black cable.
-The remote is a yellow wire with color dots.
-Front speakers are the 4 ones at the down right side on the connector (wite +,white with a red line -. This are for left side.) (Grey+, and grey with a line - this are for the right side)
watching in 2017 and this is still pretty straight forward.
Psssssh, watchin in 2018 yo!
@@Fisherdave10 2019
@@Boozi88 2020 :)
@@thirdplanetman9468 2021🙂
@@louisbarningham 2022!
I fee like it's pretty straight forward
wow that's pretty straight forward.
I'm glad I found your video because for about a good month and a half I've been searching all over the internet and not one video was on the mark, but yours was 100% in my book. So thank you, I'm setting my sub up tomorrow with the help of your video!
this is all too straight forward for me is there a harder way to do this?
Ivan Lopez hahahaa. Bless you sir
Lost me when he connected the ternimal. Lol
Bahaha xD
@@bustillosbrandon100 That was the point I gave up aswell
@@MonkeyKing3333 it was a good laugh. Btw video helped me. 👍🏼
Hey man, hope you are well! I just now finished installing a sub and amp into the exact same car, but 2.0, took about an hour for my buddy to cut and twist and solder the wires together while I was prepping the fuse for the battery, and running other wires to sub and amp. This video helped me big time and we nailed it first try when we powered back on. The accessory wire yellow is where I connected the remote wire. Everything works great and I’m SUPER happy with it. #KICKERAUDIO #KICKERCOMPS
I just got the same car and I couldn’t find a good video on this for a Mazda and Boom Just randomly appeared . It was a Very good quality video thank you so much 👍
That's the youtube algorithm! Courtesy of google (Alphabet Inc.) 😂😂
haha, I had no idea I said "pretty straight forward" that much.
Freal lol lmaoo
ADRENALINE567 Hey Pat!! I think you did an excellent job on this video!!! great description and explanations!! very easy to understand I really appreciate you taking the time to show this.. however I have the exact same LOC but the yellow wire is labeled 12V+ I am wondering what I need to wire that to?? I have the diagram to the wire harness but can't figure it out... Also does it matter if I wire the ground of the LOC onto a separate wire harness's power ground?? If you could help me out I'd really appreciate it buddy thanks again for the video very helpful!!! good effort!
Haha, I'm a voice actor, it's totally something that gets better with time, and once you become aware of it, you get better at not saying it, or at least get better at editing it out ! Keep up the great work! Thanks for the video
Great video man. This really brought back memories. I haven't done this stuff in about 20 years, but I'll be doing a subwoofer install on my son's 2007 Mazda 3 after Christmas. The only thing I plan on doing differently is that I'm going to install my LC2i LOC in an accessible spot (with my subwoofer and amp).
I did my first install when I was about 17. That was back in 1990 when TH-cam did not exist. Not knowing what I was doing, I ran the power wires and the rca wires down the same side of the vehicle I did the installation on. Noise was TERRIBLE! I ended up getting a line filter. I later talked to a professional and he told me to run my signal wires on the opposite side. I did that and the noise went away.
Wish I had access to videos like this back in the day.
The internet is an immensely helpful tool for these kinds of things! Without it, I wouldn't have figured out how to do a decent install when I started getting into car audio three years ago.
After researching for about a month this video really helped me understand how to do this i do have a professional helping me with the install but i like to know what im doing before i start doing it thanks man
thank you so much for this, i have the exact car except it's the sedan model and this video really helped
Very straight forward 👍 much appreciated!
Just keep watching thanks a lot for the video and information you share
Recommendation, if it hasn't been noted by someone already, is to take a few small zip ties, and tie down the electrical tape with them. It'll help keep the tape in place, even after the adhesive wears off (which it will over time). It's also helpful for those who use the twist and tape method (no soldering or butt connectors) to keep the connections from pulling out too easily. Still not recommended to use the twist and tape method, but I've have to do it before, and the zip ties were very helpful in keeping everything together.
Nice video man
Hey man great video!
This video was pretty straight forward
Thank you !! thats was very helpful, my 2007 mazda 3 sounds great now
To remove the paint I actually use a drill and one of those metal brush things for drills. Much easier if you have one of those. Other than that pretty straight forward ;) LOL Good video, very easy to follow the steps! Good job!
Thank you for this I just purchased my sub&. Could you let me know where you connected the control wire? I missed it.
I didn't know this was pretty straight forward. Thanks!
nice video very helpful. I have an 04 mazda 6 and two 12" subs and I am trying to install them.
did it work about the same as it did in the video? I have an 06 mazda 6 I want to put a sub in!
everything headunit i can manage. but im new to subs. interestingly enough my friend wants to use his stock unit for his subs as well so this video was VERY STRAIGHT FORWARD.. haha thanks for being so informative it's much appreciated, cheers
Jacob Power yeah... don't worry about being new to subs, they're pretty straight forward.
Great video! It's all pretty straight forward!
🤣 i was bout to post the same thing
adding this video to my instructions playlist. Very good information.
Well, that was pretty straightforward.
Video helped me out 👍🏼.
Very helpful 🙏
For those wondering if it truly is pretty straightforward, it is pretty straightforward.
Hey where did you connect your remote wire to?
Fuse box - radio (2nd from the left top row AKA no. 44). Located under glove box. Tie to side that has no voltage when car is off. It'll just switch on when you turn ignition on and not constantly drain your battery 24/7.
I just ordered a four channel amp for the speakers I put in. I'm guessing the hookup for all this would be the same regardless of whether it's for a sub or all the speakers, correct? Really appreciate the video, my friend. Thank you.
Hey man great video do you think you could list everything that ill need to do this to my mazda 3 besides the amp and sub I would really appreciate it
I have the exact same set up could you tell me which wires connect to the head unit from the LOC?
You should disconnect the negative terminal when doing it too.
this was pretty straight forward.
step one-build a rocket(pretty straight forward)
step two:power it with an arc reactor(also pretty straight forward)
step 3 connect everything else in a random ass order that nobody fuvkin knows (most straight forward)
step 4 drive straight forWard into a wall...pretty straight forward
its so pretty strait forward
thanks for the very informative video, thanks for posting this it will definitely help me out with my install!
So you can use a llc even if you have a factory Amp. Or would it be better if I use the pac unit,
I shouldn't have read the comments while video was playing. Because i probably wouldn't have noticed how straight forward this video was.
Hey man,I'm about to install a 4 channel amp in my 2008 Mazda 3 and I'm not sure which wire is the accessory 12v (the one to connect the remote wire to to tell the amp to turn on)I am struggling to find a diagram on Google could you tell me what color it is
Pretty good tutorial, thank you
Such a good video. Great job.
Hi,
Do i really need an L O C, can I connect the cables directly to the sub?
The loc2sl adapter is only for 2channels Amp?? Thanks
Could you explain to me the wiring process you did?
Where did you get the LOC ?
Sweet install! Will you be changing the door speakers? I have the same vehical.
Ah, you have the winning blue metallic! What a beautiful choice!
@@a.k.3659 Thanks!
@@ericsotosoto379 I have the same 😆 sedan base model 1,6lt gasoline engine. Last year changed mine with the coaxials Blaupunkt ICx 662 (price for 4: 60€). Also installed a beast subwoofer 😲 (Pioneer TS-WX1220AH). I did it myself after watching lots of youtube videos (one of them was this one here). I might upload a video. Ask me anything.
Here is a playlist for you th-cam.com/video/UoUpS-dXOQo/w-d-xo.html
Thank you so much!
Hello,
I see you have cruise control. What engine do you have? I have 1.6 105HP, is it possible to put it there?
"Pretty straight forward" 😂😂😂😂😂👍👍👍👍 great vid man plz respond
thanks i was hoping for that i didnt need to drill a hole in the firewall for the powercable
i got a powered kenwood sub to put under my seat. amp and sub in one. much easier and sounds good enough.
Good job man
If I run my power cable through the engine's main wire harness can I still keep it far enough away from the RCA cables when I run them under my seat? (putting a slim powered sub under the front passenger seat.
Great vid! pretty straight forward ;)
Do you recommend any good aftermarket head unit with a screen(preferably android interface) and bluetooth connection for the Mazda 3 BK?
Where did you install that thin blue wire that's connected to the red wire connected to the battery?
wait is it pretty strair forward or pretty simple im confused
Hello! Where you connect remote from amp, because i don't understand.. It's working if i connect the remote to the groundwire?
Ive hooked up my loc's. whats the easiest way to hook speaker wire from amp to speakers?
can i splice back into the factory loom that i hooked loc too? (4 channel amp for spilts and upgraded speakers)
Hi Bro ..kindly help me to connect output converter
So you just T cut the front speaker wires and twisted them with the converter wires? It been seeing vids where they cut the leaker wires and just don't use them but don't know what that does how do the speakers work if I cut them to hook the radio to the amp? But yea so T cut ? That makes more sense if that's what you did?
Thanks bro!
@adrenaline567 what LOC do you use?
i just hooked mine up to the middle brake lite hot wire amp works fine
And if it ever has an issue (Like drawing too much current and melting your tiny wire) there's a chance you might end up with no working brake lights due to a short. Sounds safe. You might wanna stay away from safety light circuits.
Raven1024 it does sometimes the interior lights dim to the beat but im to lazy to fix it
Just a little dangerous...
Shot brother you saved me $200 yoo!!!
thnx for the video
where did you find your diagram to install the loc i can’t find one anywhere
sooo i have an 05 mazda 3s with the stock navigation.. will installing an aftermarket headunit/dvd player make me lose functionality in the stock one?
I can't fit my loc behind my radio, the radio doesn't slide all the way in because the loc is in the way please tell me where to put the loc
hi bro,i followed everything and installed 12 inch build in amp subwoofer on mazda rx8 (2005).but when i plugin in both rca wire to the amp.it doesnt sounds working but with one wire ,anyone, then it works loud ,what did i do wrong ? any idea ?
Wow! Pretty straight forward! Lol jk. Good video man! This will Help me alot!
Where did you get the wire diagram? I just need to wire in the LOC now but I dont know how
Cant you just splice the rca cables & add to an exzisting speaker wire & cut out the converter?
Would this be the same for the Mazda Axela 2006?
Also how did you mount your sub? Cuz idk about you but i dont like hearing my sub smashing around in my trunk.
I have a 2007 mazda 6 bk sports maxx. I have done all other things but i am still confuse with how to install renmote wire. The loc i bought came with 4 speakers and 2 ground wires. So if someone can tell me how to install remote wire and the ground wires on loc. And i am doing the installation on stock head unit.
How does the center vents cone off i dont want to brake mine
Do you have the standard Mazda Radio in your car or something else ?
What about how you mounted the sub box?
what type of loc do you reccomend getting
Brandon Vanhouten hey did u end up getting one because I have the same Mazda and I need one but which one should I get
How you get Bose too work never worked on my car
can anyone help ouy? I called the mazda dealership, theu don't know. I'm teyi ng to install my loc in 2004 mazda 3. what's the constant power wire to install the loc into in the radio harness? I can't find it anywhere
Anyone know what kind of LOC he has? If so a link will be Appreciated
How do you secure the subwoofer in your trunk?
ur fuse should be close 2 ur battery/sourse! & if u get a c.a.b1600.1-get a serious power wire/wiring. kit
I wired everything like this but my amp won't turn on my loc works I got a snap in and play one from pac oem but idk what's going on ? Anyone help me out ?
If You Say Pretty Straightforward One More Time!!!! Jk jk. great video really helped. it was pretty straightforward. LOL
Question? Would this work on a Mazda6 or nah
Can i get a link to your LSC? cant seem to find any online ?
What are all the stuff you used and needed?
How do I hook up amp 400 watt amp into factory radio
hey i got a mazda too which you didint say what color goest to which in yours
:D
2005 Mazda 3 pretty much the same?
what sub and amp tid you use
WITH a 9 volt battery you can tell what wires goes to what speaker and also their polarity. No need for a schematic.
I’m having trouble figuring out where to run my wire from the battery to the trunk. Where would I put that through?
There are holes in the firewall 😉. Beware! You need to install fuse near the battery or else the whole car might catch fire 🔥🔥
When you put the power cable on the battery, where you put the ground cable ?
+iTouch461 The ground cable for the amp does not run from the battery. It goes straight from the amp to somewhere to a ground point near the amp. If your battery needs a thicker gauge ground, you would run a wire from the battery to a good ground near the battery. Also, whenever your system is above 500 watts, use 0 gauge power wire.
Ya man whatd you hook the contol wire up to? In my audi i hooked it into mycigarette lighter. I might do that on my mazda but i wanna know where you put it.
Did you try it and did it quirk because my amp wint turn on