How to Replace Radiator Dual Cooling Fan Assembly 2001-2007 Ford Escape

Buy Now!
New Dual Radiator & Condenser Fan Assembly from 1AAuto.com trq.video/ia-1...
This video shows you how to install a radiator dual cooling fan assembly on your 2005-2007 Ford Escape. Radiator cooling fans keep air flowing over the radiator when the vehicle is stopped or moving slowly. They are an important piece of your vehicle’s cooling system. If yours is failing, or broken, you should replace it immediately to avoid overheating and causing more damage to your vehicle.
This repair was done on a 2006 Ford Escape XLS 2.3L and the process should be similar on the following vehicles:
2001 Ford Escape
2002 Ford Escape
2003 Ford Escape
2004 Ford Escape
2005 Ford Escape
2006 Ford Escape
2007 Ford Escape
Tools you will need:
• Phillips Head Screwdriver trq.video/oaT2...
• Pry Bar trq.video/oFe-...
• 10mm Wrench trq.video/oHt-...
• 10mm Socket trq.video/oaDY...
• 8mm Socket trq.video/oaDY...
• Trim Tool Set trq.video/oPq-...
• Pliers
• Drain Pan
Subscribe: / @trq
Check out our playlist:
Ford Escape 2001-2007 1st Genereation: • Ford Escape 2001-2007 ...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@miguelmonroyiv5960]

What does the part cost for the 2.0L 4 cyl engine on the 01 ford escape?

[@vhockada]

Sadly the North isn’t very friendly to our Ford Escapes.

[@miguelmonroyiv5960]

What does this type of job usually cost laborwise??

[@marcleblanc3602]

3:35 I dont have that impact sensor thing, all direct to fusebox and fan wont reworks :(

[@codywright4910]

Why did you drain the radiator and disconnect the radiator hoses if you were only taking the fans out ? That’s not needed , also why did you take the bumper cover off if you did everything from the top ???? This is a lot of nonsense parts being removes