Hi Dave, I have a True T-15G Refrigerator and the condenser pipe insulation looks melted. Almost like black tar. It even dripped down to the water collection tray. Thoughts? Would love your opinion. You’re a very smart professional when it comes to these things. Liked and subscribed!!!
The only person cares about bounty is the dentist 🪥 who really would need the project to clean the shit off his teeth but I hope he can pay for that job.
10:29 - It’s surprising to me how close you can get to that table with your fire without scorching it! 10:53 - How far in did you go with the cap-tube? Do you dip the end of it in refrigeration oil before installing like I’ve seen some guys do?
In every vehicle I ever owned that had A/C..., I mean I plead the fifth😉 I just finished a TUC27 here in Westland. Set at #1 the evaporator coil was freezing up. Replaced the cold control and now it's behaving real nice again. Cut in is a little high, but I was told to not rewire the True evaporator fans any more🤨😠
Oh sure, I keep my standalone temp probes in the air vents on my truck. Helps keep 'em from wandering off, unless I launch it too hard. I will probably never find myself replacing an evaporator in a True make up table, but at least now I have some idea what's involved.
If there was 1 cooler mfg I despised working on in my 17+ years doing commercial refrigeration it was "True" .I have done this repair on this model more than once. R-12 & R-134a. a good tech with normal brazing skills could make the connections in the box.
Any check the pressure inside your Van in there that you what a leaks in Room neg your loan charge and all they got a leak and their GM don't the have stuff for a pitch lager I could do on of Mana forder are crapy Carrier junk
I love this guy's stuff I have a question. I'm a ten year Tin knocker and recently was stolen to a new company doing service just like this. What is some really good advice? I'm older and very nervous it's like starting a new trade pretty much and I have a lot riding on this job
great channel.. If a fridge is not cooling but the first 6 inches or so of the cap tube is completely icing over, where would you start? Condenser coils are clean. It worked a month ago when I plugged it in and it has been sitting off till last night..
Yeah I also abandoned the accumulator because it didn't come with my new evaporator. Also ordered a cap tube cutter. I was using the file method for cutting cap tubes. Yes to screw the new normal. Good job
my lucky day so much good content to see today, u, rick, Chris, awesome, thanks for the tips, work on these units a lot. and about the haircut, i feel you man, had to go bald :))
Have a great video. Perfect and excellent work. Your demonstration is very nice sir . Keep it up and great job 👍💪👌❤️❤️❤️❤️ I learn a lot form this video
Your like Monet with that torch Super Dave... Lol ...Send a pic of you at the end to Pelosi and she'll open every salon in California ... Lol ... good vid ...
I do exactly the same procedure with my manifold and the vacuum pump - pull out the contaminants while vacuuming the system. Great video Dave, thanks! Btw, you’re starting to look like Sammy Hagar with the hair... I’m starting to look like Dave Grohl... 🤣
I just insulated the suction line, accumulator, and expansion line (past the metering device) all with 1/2” foam lineset insulation & 557 Duct tape... 2004 Silverado LoL
I've seen some leave the pressure on the suction line at 4psi, but you always leave it at 18psi when working with r134a. Could you please help me understand what is the correct pressure?
Good stuff.. the refer man is knocked dead again. Hair cut.. no way grow it to the knees..dont be a quitter..lol. be safe have a great night brother Dave.
Looks like it’s ready to loose a caster wheel too. My tubing cutter goes around as few times as possible, I got shit to do lol. I broke the door off my VP-85, I called Field Piece to order a replacement door and they told me no problem and shipped that day and didn’t charge me. A standup company. You need a Flobee for your hair.
Nice job Dave! Thanks for showing all your work for us newbies.
Thanks for watching Dennis.
@@NorCal-refrigeration 10:24
Diamond Dave for the win again!
Finally got my hair cut yesterday! In NC you have to ware a mask, but they are open as of last week. Go ahead and start your dreadlocks Dave
Nice repair Dave, keep the videos coming bro 👍
Thank you for this great vedio
"no no no....you no make video.....customer will see how dirty my place is..." 🤣🤣🤣🤣
When I replaced the evaporator I change the suction line to. No soldering in the box that way
was that a customgrow intro reference?
Taqueria Santa Cruz on mission st. Santa Cruz, ca
Hi Dave,
I have a True T-15G Refrigerator and the condenser pipe insulation looks melted. Almost like black tar. It even dripped down to the water collection tray.
Thoughts? Would love your opinion. You’re a very smart professional when it comes to these things. Liked and subscribed!!!
C'mon, now. First you say weld and then you say solder. It's neither. It's brazing. That's my TH-cam critique of the day.😅
Reach in only?
I recharged my work van.
Great video's.
Not had a hair cut for years, just tied back in a pony tail, meanwhile everyone else is looking like they're from the 1970's haha.
I've had one setting for my clippers and usually throw away all accessories for the last 20 years.
A little Three Flowers in that hair, good to go
Nice
What are you going to weld with that big ass torch. It's like back in the 80s with the long hair.
You have to set the flame tiny.
Enjoy your video but man did you really just solder on top of the customer table. 🤣😂🤣😂😅😂🤣
20:07 ....HaHa, totally!
Your break light is on
Yes failed ABS module
Why your removed the air dust filter 😂😂😂😂
Hy
The only person cares about bounty is the dentist 🪥 who really would need the project to clean the shit off his teeth but I hope he can pay for that job.
just go full caveman and be done with it, then when they say to wear a mask point and say not mask compatible
🤣😂🤣😂
Dr Dave doing surgery
guilty 🙋♂️
The jobs look good but I want to know how you able to tell the customers what will cost
Looks like you were driving with the emergency brake on.
Abs module has loose solder connections
That evaporator must be taller than it looks, I kept waiting for you to set the table on 🔥
Blinker fluid probably low 😂😂😂😷
10:29 - It’s surprising to me how close you can get to that table with your fire without scorching it!
10:53 - How far in did you go with the cap-tube? Do you dip the end of it in refrigeration oil before installing like I’ve seen some guys do?
keep it long bro. you look like a true californian.
In every vehicle I ever owned that had A/C..., I mean I plead the fifth😉
I just finished a TUC27 here in Westland. Set at #1 the evaporator coil was freezing up. Replaced the cold control and now it's behaving real nice again.
Cut in is a little high, but I was told to not rewire the True evaporator fans any more🤨😠
Is that blonde Johnny Depp? Naw this guys actually working and sober!
Hey man you even have the Central Americans make some real food? Their food? The good stuff not the stuff the gringos order.
I wouldn’t have put that much money into that cooler. That one goes to scrap cuz next week the compressors gonna fail....
right? captube already replaced, suction accumulator removed, who knows how long the compressor will last
Oh sure, I keep my standalone temp probes in the air vents on my truck. Helps keep 'em from wandering off, unless I launch it too hard.
I will probably never find myself replacing an evaporator in a True make up table, but at least now I have some idea what's involved.
Ive run my temp gauge a few times out here during the hot part of summer....always nice when its 120* out and the truck AC is running 48* at idle
That is a good feeling.
I felt silly rolling in a dodge caravan until I parked next to an Astro van the other day, dam that thing was basically the same size.
Much longer on furlough and my Chevy Venture that has been gathering dust is about to turn into a SideJobBob Mobile!
If there was 1 cooler mfg I despised working on in my 17+ years doing commercial refrigeration it was "True" .I have done this repair on this model more than once. R-12 & R-134a. a good tech with normal brazing skills could make the connections in the box.
First time watching your videos.
I wonder why you're driving with your brake on - see dashboard red light - usually an emergency brake indication. 😳
Thanks for being us along! I agree with the underground hair cutter! I need it too! Nice Job! 👍
Any check the pressure inside your Van in there that you what a leaks in Room neg your loan charge and all they got a leak and their GM don't the have stuff for a pitch lager I could do on of Mana forder are crapy Carrier junk
I love this guy's stuff I have a question. I'm a ten year Tin knocker and recently was stolen to a new company doing service just like this. What is some really good advice? I'm older and very nervous it's like starting a new trade pretty much and I have a lot riding on this job
Just be thorough and check the whole system. Multiple offenders are on most units. 🤘⚡️🤘✨✨
This must be warranty, but it looks to old. Most people will not waste money on those because they can buy cheaper.
Like ALL y'all missed the giant nug of weed on the restaurant floor at 2:01?? lamo 😂🤣
This guy is a true gangster. Who the hell brazes on a dinning table?:)))
What is the size of the capillary tube did you use please and if a prep table 2 doors how can i size it
I noticed you removed the accumulator don't you to have one on coolers and freezers ?
Paging Dr. Nor-Cal, paging Dr. Nor-Cal, you have a major surgery scheduled. Great repair Dave!
Sup skid!
Thanks Lex!
great channel.. If a fridge is not cooling but the first 6 inches or so of the cap tube is completely icing over, where would you start? Condenser coils are clean. It worked a month ago when I plugged it in and it has been sitting off till last night..
Possibly low on charge
Great video. I think everyone forgot how to drive from being locked up. When i first got in my truck i felt a bit off ....lol
Very true
One drip of silver and your buying them a new table.
Yeah I also abandoned the accumulator because it didn't come with my new evaporator. Also ordered a cap tube cutter. I was using the file method for cutting cap tubes. Yes to screw the new normal. Good job
Right on Frank
Find out where Pelosi goes to, they will take care of your hair
Buzzcut bro - go military style
my lucky day so much good content to see today, u, rick, Chris, awesome, thanks for the tips, work on these units a lot. and about the haircut, i feel you man, had to go bald :))
21:02 yeah bro I live with the headlamp I need light in those dark corners
Can’t work with out it. Lol
Fantastic job 👍👍👍👍 Geraldo lmao 😂 😂😂😂
That was epic.
tip of the day @ 11:23 and don't burn their tables lol
I’m a brazing wizard no tables injured during this filming.
I like your cap. Where can I find one? 😅
ey bro i like your videos big time for sure but dont you think its highly unprofessional to braze on top of one of their dining area tables?
Hah I’m so pro I know what I’m doing. 😂🤣😂😂😂😂
Exelente trabajo lo felicito desde la distancia saludos desde Argentina
Soy tu fan soy estudiante de refrigeracion
Astro van brake light illuminated, I stick my digi down the A/C vent all the time bro!
ABS module is bad. But the van runs great.
🎶 The TH-cam police🎶😂. Love that you played the song when you were brazing the coil.
🤣😂🤣😂🤣😂
Guilty... just because I keep extras in the vent as backups.
🤘⚡️🤘
Bam busting my balls 🤣
Gave myself the buzz cut with #1 guard in the yard back in March and used the leaf blower to shake it off... grew out pretty good!
Epic
Gonna plug up that brand new cap tube with carbon flakes Dave! 😱. Nitro flo bro 👍
Btw love your videos dude, I’m working my way through them all!
Great job Dave!!!
Thank you
👍🏻🍻🍻😷😷😷 that's the new way
i hate those screws when they get stuck
I can't believe you have the confidence to braise over their Dining Room table. Who is better then the Norcal Man?
I just leave my thermometer in I don't even take it out
thank you My friend
Have a great video. Perfect and excellent work. Your demonstration is very nice sir . Keep it up and great job 👍💪👌❤️❤️❤️❤️ I learn a lot form this video
Are you low on brake fluid,your pads are wore, or did you leave the parking brake on?
its a common problem with early 2000's GM products. the abs module is garbage
Yep abs module loose solder connections
You need to carry that gat
Vangina! Still keeping her cool!
Your like Monet with that torch Super Dave... Lol ...Send a pic of you at the end to Pelosi and she'll open every salon in California ... Lol ... good vid ...
I do it time for a new van
I do exactly the same procedure with my manifold and the vacuum pump - pull out the contaminants while vacuuming the system. Great video Dave, thanks! Btw, you’re starting to look like Sammy Hagar with the hair... I’m starting to look like Dave Grohl... 🤣
I just insulated the suction line, accumulator, and expansion line (past the metering device) all with 1/2” foam lineset insulation & 557 Duct tape... 2004 Silverado LoL
I have done it sir.
I've seen some leave the pressure on the suction line at 4psi, but you always leave it at 18psi when working with r134a. Could you please help me understand what is the correct pressure?
Shit, you got me. I went so far as to using the vent to hold my pencil psychrometer. Gotta make sure that she blows cold and dry.
Good stuff.. the refer man is knocked dead again. Hair cut.. no way grow it to the knees..dont be a quitter..lol. be safe have a great night brother Dave.
Is the evap coil also called an expansion coil? The gas 'expands' in the coil, it doesn't 'evaporate'. Just wondering.
I thought you have to braze with nitrogen because of oxidation and carbon? Is it not necessary to run the nitrogen through the lines as you breeze?
Good little rebuilt Dave . @ 6:30 the YT 👮🏼♀️ watch out !!!
You guys get everything to replace for me I will have to clean up and repair that evoparator
U got me. Lol
Cool!
You got your emergency brake on buddy!
No my ABS module has loose solder connections and in to busy errrrrr lazy to fix it. 😂😂😂😂😂😂😂😂😂😂✨
Master......
Yea bro I do that too I think she needs a little shot of juice. Ask jonhvac about it you prolly want to do a total evac and Recharge with good Vacuum
In the plans
Good one Dave , get a haircut hippie 😂
😂😂😂😂😂
Looks like it’s ready to loose a caster wheel too. My tubing cutter goes around as few times as possible, I got shit to do lol. I broke the door off my VP-85, I called Field Piece to order a replacement door and they told me no problem and shipped that day and didn’t charge me. A standup company. You need a Flobee for your hair.