Hello Herb: You will have to access with the Panelview software and add a screen configuration access button. There is a procedure for accessing the configuration screen using a keyboard. It is in the panelview documentation that came with the unit. Or search the Rockwell site for the manual and it is explained there in detail.
Hello Sir, I had the same problem with 3 brand new series C 1500 screens, however, I fix the problem with just a firmware update. I used RP1 logic modules on those screens and after the firmware update didn't show any errors. The FW version I used was 5.10.16UP
Hi I am trying to troubleshoot a Panel view Plus 1000, but when powered the screen does not show anything, and The Fault LED is blinking, according to the manual this means it is a recoverable fault. I suspect it does not go past the initial boot. Any ideas, or do you have a contact I could reach out to you to better explain?
HI Bart: I would suspect that the CCFL is burnt out and not having a picture to look at possibly a damaged overlay causing a stuck button error. Since the PVP6 is a plug and play item, I would start by moving the logic module to another panelview if you have it to see if the problem moves with the logic module. No idea where on the planet you are - I am in BC Canada. Normally I can turn these around in a day as I have the parts in hand to fix them at a reasonable price. I will see if I can enable the contact link here on YT and then you will be able to contact me. Bruce B
Thank you for replying to my comment. I am in Honduras, Central America. I am looking for way to contact you via email, but can't see where contact on youtube is located. Not sure if I can give my email, and then you can erase the comment to prevent from getting spam, or falling in the wrong hands.
@@bartniehorster3453 at the top of the front page where it says' with over 35 years experience' there is a > - click on that and a window will open - scroll down a bit and you will see the contact area. Click on it and follow the steps to get my youtube email. Bruce
Hello Tamer: When the terminal is booting up there should be a white square in one of the corners. Press on it until it goes away and it should boot up in configuration mode. It all depends on how it was programmed. Thanks for the comment.
Hello Sir,
Hope to see more videos about VFD, Kinetix and Analog testing from you.
Hello Herb:
You will have to access with the Panelview software and add a screen configuration access button.
There is a procedure for accessing the configuration screen using a keyboard.
It is in the panelview documentation that came with the unit. Or search the Rockwell site for the manual and it is explained there in detail.
Hello Sir,
I had the same problem with 3 brand new series C 1500 screens, however, I fix the problem with just a firmware update. I used RP1 logic modules on those screens and after the firmware update didn't show any errors. The FW version I used was 5.10.16UP
Hi - Glad to hear of another way to fix this. Thank you
Hi I am trying to troubleshoot a Panel view Plus 1000, but when powered the screen does not show anything, and The Fault LED is blinking, according to the manual this means it is a recoverable fault. I suspect it does not go past the initial boot. Any ideas, or do you have a contact I could reach out to you to better explain?
HI Bart:
I would suspect that the CCFL is burnt out and not having a picture to look at possibly a damaged overlay causing a stuck button error.
Since the PVP6 is a plug and play item, I would start by moving the logic module to another panelview if you have it to see if the problem moves with the logic module.
No idea where on the planet you are - I am in BC Canada. Normally I can turn these around in a day as I have the parts in hand to fix them at a reasonable price.
I will see if I can enable the contact link here on YT and then you will be able to contact me.
Bruce B
email is enabled on youtube. Once you contact me I will disable it. Way too much spam out there. BB
Thank you for replying to my comment. I am in Honduras, Central America. I am looking for way to contact you via email, but can't see where contact on youtube is located. Not sure if I can give my email, and then you can erase the comment to prevent from getting spam, or falling in the wrong hands.
@@bartniehorster3453 at the top of the front page where it says' with over 35 years experience' there is a > - click on that and a window will open - scroll down a bit and you will see the contact area. Click on it and follow the steps to get my youtube email.
Bruce
Hello sir
How to access configuration mode in panelview plus 7 & 1000
Hello Tamer:
When the terminal is booting up there should be a white square in one of the corners. Press on it until it goes away and it should boot up in configuration mode. It all depends on how it was programmed.
Thanks for the comment.
@@abplctestbench759 the white square in one of the corners.not found