Beretta A300UP Briley handguard
ฝัง
- เผยแพร่เมื่อ 11 ก.ย. 2024
- Beretta A300 Ultima Patrol
-Mesa tactical Urbino stock no cheek riser,limbsaver buttpad
-Specter gear 5 shell holder
-GG&G charging handle
-Beretta pro lifter
-Holoson 507c green dot
-Briley handguard
-Strike Industries mini hand stop
-Olight Odin mini flashlight
-Bravo Company QD sling attachment
-GG&G tube cover with clamp
-Nordic Component magazine spring
-Savior Equipment 6 shot side saddle grey
-Aridus follower
I had ordered the gg&g a week ago, but I had not received it yet. Then I had a bad experience with a communication with someone there, so I asked them to cancel it.
I've ordered from Briley before (right before they released the a300 handguard) and had a positive experience with them. You've convinced me that I should go with them again and cancelling my order is the right move. That thing looks sweet
@@draintesm I didn’t have a bad experience with the Gg&g people and the refunded my purchase but I can’t trust their product anymore after it broke right away
I have this same handguard on my Benelli M4 and absolutely love it. Have about a thousand rounds through it with the Briley handguard insatlled and have not had a single issue with it. Briely makes some quality equipment, so I also got their match saver and man this thing is sweet. Definitely recommend the Briley handguard for anyone who has a shotgun that is compatible with this hanguard.
The one thing i find interesting though is that on the Beretta handguard you guys have a couple of the mloks coverd up like they didnt cut slots around the bottom on the Benelli it is fully opened.
@@JohnDoe-zg6fn the only thing I can think of is for grip is why they didn’t cut out those slots, as they are textured, I agree Briley is the way to go
that looks great..Love the pistol grip too. Not sure why Beretta is saying you can't swap out the stock on the a300.
@@jc51373 maybe beretta says that because it’s a aftermarket stock, but the issue on this gun and my 1301 is that it rotates, with red loctite it was better
@@Timcanniff311 ahhhh so it moves? They put that stock on the 1301 from the factory I think
@@jc51373 yes you are correct, but it still moves
Looks good bro!
@@nexus6999 thanks hero
Spoke with Briley, and they confirmed this HG will work on my A300 5 round compliant model. The compliant model mag tube is about 4.5 inches shorter than the standard model. As such, there's no barrel clamp bridge either. Just a short mag tube end cap. What holds the Briley in place? The stock HG, and I believe the Zhukov is simply held in place by the end cap. Am I missing something?
@@Jmp64-ns8zl the tube cover on the 7 round tube holds the briley on
How's the stock working out any issues? I have one coming and the gg&g tube cover , that hand guard mite be on my list but oh man that's pricy for now I wrapped the factory with some camo wrap
I’ve had no issues with the stock so far, not rotating on me like others have mentioned, I didn’t have luck with the GG&G handguard, but it sure looks awesome, I bet that wrap looks sweet though
@Timcanniff311 good too here on the stock , I needed a way to manage the surefire scout light cable and pressure pad so camo wrap works good , now I'm looking at red dots and wish they had a front tritium sight, I'm not sure how the front sight can be switched over tho , I've seen some list for 1301 and a300 with factory ghost ring sights
@@ninjascout468I have not looked into changing front sights yet, with the green circle I use in the holoson I don’t even notice the fiber optic color, and I got the flashlight on for night anyway, not sure if the front sight on the 300 can be replaced with anything, if so let me know, I’ve bought everything for this gun except that, so might as well spend more money
@@Timcanniff311hope to chat with ya
Is that a Specter Gear shell caddy on the Urbino? I was going to get one, but the guys at Specter talked me out of it. Said it would be too loose on the forward Velcro strap. Yours looks like it works fine? Although it does cover the sling attachment on the butt.
@@Jmp64-ns8zl yes specter gear I used the ring on the shell holder versus what’s on the stock to mount the sling, and it is tight doesn’t move on the stock
@@Jmp64-ns8zl maybe the guy just said that because he never tried it on this particular stock, the 5 shot is made specifically for a hogue stock
I was considering the Zukhov from GG&G but now I’m concerned because of your experience with it breaking….can you explain what broke? I plan to order a Briley this week along with their match saver and spacer.
@@scottdorsey9350 when I talked to GG&G they told me the ring inside broke because I had a flashlight mounted on the m-lok slot, but that’s what they are there for us to mount stuff, that’s why I got the briley, and if you don’t want to spend 50$ on a match saver from Briley, Oscar Delta company has a m-lok match saver shipped to my door for 24$ and I’ve had no issues with it, that’s what I used anyway, hope this helped, I have a 1301 now and the match ever is in that video I just put that video out yesterday
@@Timcanniff311 thanks for the info, did the ring break while firing the weapon? Also, thanks for the match saver advice, did that one come with the m-lok hardware to mount? I’m definitely going with the Briley, have not seen one negative feedback about it other than price….but to your point, you get what you pay for
@@scottdorsey9350 yes the handguard broke when I fired a slug and the bolt would not go into battery, when the ring broke is dislodged the snap ring on the gas piston, and yes the Oscar delta comes with hardware
@@Timcanniff311 thanks! I’m glad I viewed your post before making a big mistake with the GG&G purchase. One last question, I’m getting an Olight Odin….how does the pressure switch mount, m-lok?
@@scottdorsey9350 no it has a pic rail mount but I used a Magpul m-lok tape switch mount, watch my 1301 video and you’ll see it on the briley, it works well holds it good, I got the Magpul mount off amazon like 14$ I had to trim the end of the olight switch with a scissors and take a circular file and file down the U channel in the mount itself, took me about 3 minutes to get it to fit
Hey man, I messaged you via reddit, did you use the ring that came with the handguard on the GG&G mag tube cover?
Hey have you shot this with this new handguard yet?
@@ChrisIsGuapo I have not yet
@@Timcanniff311 oh okay no worries. I’m looking to add it to my a300 too, so I can utilize the additional mlok slots.
@@ChrisIsGuapo there are a lot of them!
How much does it cover the top of the barrel?
@@CH-XC2011 it goes about a half inch higher than the barrel and the sides are at a 45° angle and there is about a 3/4 gap between the sides down the center, so you can use a C grip and not burn yourself
@@Timcanniff311 Thank you
@@CH-XC2011 no problem
Just received my Briley Handguard after waiting anxiously for 3 weeks, and more than a few questions to Briley as to whether the handguard will work with the A300 Patrol compliant model. Well, sadly it appears... no, it will not. Very disheartening given Briley essentially guaranteed it would. I honestly don't think a lot of people even know what a compliant model is. The piece of plastic that meets the receiver and is part of the original handguard from Baretta is molded to a tube the runs the length of the mag tube. It doesn't do anything, but is there and at the very least would require mag tube disassembly to remove it. What a bummer. Do I Dremel it off, easy enough, but do I then run into other issues? So bummed because the Briley is beautiful addition.
@@Jmp64-ns8zl so the spacer towards the receiver on the 7 round tube is removable and on the 5 shot tube you’re saying it doesn’t come off, is that correct, I’ve never seen a shorter tube version of the a300. If it’s able to be dremeled off do it, the briley is much better, me personally I am not afraid to modify stuff to make things work, and sometimes aftermarket parts not just guns parts need modifications to work, wonder why beretta would make a different part for the same gun, wish you could send pics through TH-cam . Do you use Reddit? You could put it on tacticalshotguns subreddit and I could look at it
@@Jmp64-ns8zl can’t find a video of a compliant model a300 disassembly, the tube that connect to the bolt itself is that what you are referring to
@@Timcanniff311 The spacer the abuts the original handguard is the same, but they then molded it at the bottom to a polymer tube the runs forward to the spring. That tube is the issue. And I am afraid to cut it, if there are then going to be more issues. I'm really surprised that Briley did not know for sure. Tried reddit, wouldn't let me post. Not to good with tech though. Appreciate your time.
@@Jmp64-ns8zl did you create a account on Reddit? I’d like to try to help but it’s tough without pictures
@@Timcanniff311 I was able to get the barrel off and remove that lower sleeve in the process. However, when I slid the Briley on, it was nowhere near flush with the receiver. The upper part of the Briley flared about a 1/4 inch on each side. Plus there's a lot of movement in the handguard, just cannot tighten it enough. I will try reddit again.