DIY Vapor micro rc plane part 2
ฝัง
- เผยแพร่เมื่อ 7 ก.ค. 2019
- REQUIRED MATERIAL
3D Printed
Frame download: www.thingiverse.com/thing:373...
1 Coreless motor Syma X5 X5C X5SC
1 Gear Syma X5 X5C X5SC
1 Coreless motor Cheerson CX-10 mini
1 Propeller Syma X5 X5C X5SC
1 Propeller Cheerson CX-10 mini
1 150mAh Lipo battery
Bamboo Stick / Carbon fiber stick
Styrofoam box / EPP Foam
Paper Clips
Copper wire
Wire for antenna
JST wire
Reciever
Transmitter
EQUIPMENT
Hot glue gun
Cutter
Solder
Solder wire
CA glue
Clear tape
Lighter
Ruler
Tools set
Music : Best of Alan Walker
Noice build
Good
nice one
That plane is awesome Thank you for sharing
Thanks gan tutornya
Is it possible to buy the blue connectors as a kit?
👍😊Great Job !
Great idea, what is the name/type of receiver you used? You used a motor as actuator for rudder not a normal servo or electromagnetic so where do you link it to receiver? Thanks
Yes I use a coreless motor as a replacement for the damaged servo on the ruder part. I used WLtoys F949 Airplane Spare Parts Receiver Board. You can buy it at almost any online seller
@@hauwwantjong1127 I see, but when I look at F949 it doesn't have electromagnetic actuator, it has two servos. How did you replace a servo with 3 wires with a two wire coreless motor? Thanks
@@grantaware7190 F949 does not have a servo cable because it is already connected to the board. You can use a cable connection on the micro coreless motor on the receiver board. You can see the 8:28 minute on my TH-cam video.
@@hauwwantjong1127 Thank you, I did not know that, you sound like a smart guy with microdrones. I have a problem and can send you reward if you can solve it. I want to turn two drone motors to act like an actuator or servo, just like your rudder application. I was thinking of a zener diode solution that only sends voltage above a certain voltage, but I am not good with electronics. Would you know a way to make micro drone motors into similar electromagnetic servo to act like rudder. (I know, I could buy f949 receiver and do what you did).
@@grantaware7190 May I know what you want to make. F949 is better controlling with servo. Why replace it with micro drone motor