Anybody hating on this video has never done body work before. It is perfectly ok to section in a rocker panel without replacing the entire uniside. Everything he did was a factory approved procedure. I don’t know a single body shop that would replace the whole uniside for that hit.
This guy is the magic car repair. Wow. If we have a guy like that in each body shop around to us is going to be awesome! Great job and thanks for passing it on that videos. 👍
i love this kind of realistic repairs more than restoration to perfection... But as former welder, my eyes hurt just seeing the almost complete absence of safety measures... Job security is not an expense, it is an investment.
😳 This guy is AMAZING he is the metal Whisperer 👍 But I did not see him do any spot welds. I hope that company appreciates him and is paid accordingly. Sir you are a MASTER ❣️👍
I have seen many restoration videos where panels are patched in like this. They frequently rust after a few years even with loads of rust protection. Modern cars are galvanized and are so much less likely to rust. But what they put in will probably not be galvanized and neither is the welding wire. I think even if it is structurally sound which I'm not sure it is, it will rust from inside especially the piece of bare steel near the bottom of the B Pillar.
That’s a factory sectioning procedure. If you prep your welds properly, you won’t have any problems. Been doing this for a living long enough to know that welds rust from user error.
If you clean your welds properly, prime them with the proper primer, and spray the inside of the rocker with cavity wax, the repair will never rust through. When welds show through over time it’s because the person who welded it wasn’t good at their job
@@stax6057 I agree; but a repair like is makes sense where labor is cheap; in Germany this car would be sold as „parts“ to companies specialized in such.
Hello le travailleurs super professionnel. J espère pour lui qui gagne beaucoup d'argent .il travail super bien bon courage et meilleur vœux pour l année 2023 mes amitiés
I admire what Jack is doing. Saving cars from the junk heap. I would rather meet him than anyone in hollywood. I have built several engines and built and altered chassis. He's good.
@@user-cf6te2ug2g as well as the tools this guy isn't using any eye protection when using welding equipment so where is this smash repair shop based likely where labour is cheap and well life is also cheap this person repairing damaged cars will eventually have severe eye sight problems when he is older this is what happens in countries where they have a lack of unions or no unions at all as I said at the start this is likely filmed in a country where labour is cheap and life is cheap.
Besser geht's nicht... Solche Handwerker sollte es mal hier in Deutschland geben bzw wenn, dann sind sie nicht bezahlbar! Hier hätte man dem Kunden gesagt "Totalschaden da ist nichts zu machen"... Ich möchte mal gerne wissen, in welchem Land der Kunde wie viel bezahlt hat. Eine fantastische Arbeit !!!
Anybody hating on this video has never done body work before. It is perfectly ok to section in a rocker panel without replacing the entire uniside. Everything he did was a factory approved procedure. I don’t know a single body shop that would replace the whole uniside for that hit.
Why is it that I suddenly can't get enough of auto repair videos?
This guy is the magic car repair. Wow. If we have a guy like that in each body shop around to us is going to be awesome! Great job and thanks for passing it on that videos. 👍
You right 👍 that is in the big work shop but in small workshop. I think nothing .this is all replacement
The problem comes with another impact on this side.
@@RsOnTheStreetS It doesn't. The car was repaired per factory specifications. Why do stupid people like you always comment BS?
i love this kind of realistic repairs more than restoration to perfection...
But as former welder, my eyes hurt just seeing the almost complete absence of safety measures...
Job security is not an expense, it is an investment.
Молодцы ребята! Приятно смотреть на вашу работу и ваши жизнерадостные улыбки! 👍
А нам не ваш комментарий и аватарку!
This was a nice job again! I like to see when all damaged layers are replaced and welded in the proper way! Also, airbags replaced! Well done!
Нижний шев порога сразу отличается как и дверь правая передняя от крыла и правой задней двери
😂😂😂я искал такой комментарий, куда же без таких умников как ты, ты в любом случае сделал бы лучше
Es chingon ese Man, siempre con su sonrisa y bien optimista.
молодец дай бог здоровья, и что бы таких как ты много на земле
Без маски варит, не долго таким мастерам работать.
Сверло болгаркой поправить ;). Наш чувак!. И распоркой пихнуть двери. Узнаю советскую школу ремонта ;).
Questo ragazzo è un ARTISTA.
Complimenti 👏👏👏
Ходят слухи, что китаец работал 5 лет на авторынке Зеленый Угол... Отсюда овладел секретами кузовного ремонта... 😂😂😂
Низкий поклон таким мастерам. Золотые руки!
Двери зачем менять? В Цвет , не Попали!!!!!
Видно , что -Перекрашено!!!!!
Посмотрите канал авторем Ульяновск, и вы убедитесь, что то, что он щас сделал почти полная лажа)
I would love to see the reaction from the customers. It would be priceless
Serviços sensacionais...parabéns aqui do Brasil 🇧🇷 🇧🇷 🇧🇷
Vous faites du super boulot c'est incroyable ! Bravo
Хорошая работа, но при таком уровне оснащения надо использовать контактную сварку, а не полуавтомат. 👌
Brilliant
An absolutely Perfect job .
Congratulations.
😳 This guy is AMAZING he is the metal Whisperer 👍
But I did not see him do any spot welds.
I hope that company appreciates him and is paid accordingly.
Sir you are a
MASTER ❣️👍
Congrats for an excellent job!
Профессионал своего дела, знает что нужно делать
you guys are awesome fixing everything top your service
I have seen many restoration videos where panels are patched in like this.
They frequently rust after a few years even with loads of rust protection.
Modern cars are galvanized and are so much less likely to rust. But what they put in will probably not be galvanized and neither is the welding wire. I think even if it is structurally sound which I'm not sure it is, it will rust from inside especially the piece of bare steel near the bottom of the B Pillar.
Если обработать антикором, то ничего не будет ржаветь.
I wouldn't trust the long-term integrity of the repair.
That’s a factory sectioning procedure. If you prep your welds properly, you won’t have any problems. Been doing this for a living long enough to know that welds rust from user error.
If you clean your welds properly, prime them with the proper primer, and spray the inside of the rocker with cavity wax, the repair will never rust through. When welds show through over time it’s because the person who welded it wasn’t good at their job
@@stax6057 I agree; but a repair like is makes sense where labor is cheap; in Germany this car would be sold as „parts“ to companies specialized in such.
Very nice, beautiful and good work
А то что по цвету отличается это норма 😂👍
В оттенок не попали 100%... даже с переходами не заморачивались, хотя это на камеру так... в реале глазом может и не заметно
Amazing work you should be very proud!
Не битый, не крашенный 😀
Бабушка в магазин за хлебом только ездила, мамой килянусь!
Awesome work. Too many armchair quaterbacks telling you to do it another way. They sir are just idiots, KEEP UP THE GREAT WORK. 👍👍👍👍👍🥰🥰🥰🥰
Sei un professionista, Complimenti!
Заебись машина из консервных банок!!
Excelente trabajo de 💯 perfecto. Saludos desde Teotihuacán México 🇲🇽👋🙂👍
Jack I like you hardworking and professionalism. Your are very good denter and paint... I wish I have team like this, Nissan ksa..
Excellent work 👏👌👍✔
Parabéns! Show. Deus abençoe vc.os orientais são muito originais com o que faz. Abraço. Sou do Brasil
As a german i never make compliments but this is Gute Arbeit
Mechanic Jack of all master of none
Great job. 👍🏽
Мечта перекупа. Не бита, не крашена, уровень "ездил дедушка на дачу".
Muy útil sus videos. Gracias por mostrar sus conocimientos
Saludos desde Argentina.
Fantastic.
This site is cathartic. 🙏
de BH MG Brazil o seu trabalho é ótimo
Caramba em vocês são sensacionais, parabéns 👏
The man what a good job 👏 👍❤️❤️
Молодцы ребята! 👏👍
Nice job, the next owner will never notice it.
Hello le travailleurs super professionnel. J espère pour lui qui gagne beaucoup d'argent .il travail super bien bon courage et meilleur vœux pour l année 2023 mes amitiés
Boy, you are a beast in the can. CONGRATULATIONS
Brother you are the very best amen 🙏 ♥️🇩🇴
Great Job, fast and perfekt work 🤌
Wow Great good job☺🇮🇩
Excelente trabajo muy bien 😁son muy profecionales, me gustaría aprender tanto como ustedes
Good Job...👍👍👍🔥🔥🔥
Execelente reparación saludos desde Argentina
From Pakistan..🇵🇰🇵🇰🇵🇰
Great work
I admire what Jack is doing. Saving cars from the junk heap. I would rather meet him than anyone in hollywood. I have built several engines and built and altered chassis. He's good.
Не бита и не крашена 😁
Wow, great job!
PARABÉNS GAROTO , VOCE É MUITO BOM, BRASIL
You made that look easy! 👍🏻🇺🇸
With the proper tools the job becomes a lot easier
@@user-cf6te2ug2g as well as the tools this guy isn't using any eye protection when using welding equipment so where is this smash repair shop based likely where labour is cheap and well life is also cheap this person repairing damaged cars will eventually have severe eye sight problems when he is older this is what happens in countries where they have a lack of unions or no unions at all as I said at the start this is likely filmed in a country where labour is cheap and life is cheap.
One word: skilled!
Excelente profissional! Fora da normalidade !
Profissional bom de serviço.
Я так переживал за наклейку на средней стойке.
Very good professional made job
Well done good repair wish you😎
Excellent work 👍👍👍
Uzbekistan 🇺🇿🇺🇿👍👏
America 🇺🇸 🇺🇸 🇺🇸 😂😂😂
Hai Good Afternoon Super Warking Super Super fishing Super
I love this guys , 👍, very good job.
Que buenísimo ese joven felicidades
Beautiful work
Amazing job he saved the sticker on the pillar 😁
He is a talented wizard of sheet metal.
Не бит, не крашен.
The Bruce Lee of collision repair!
Incredible skill!
Hello, you are a magician it would take people like you France
Good luck
Good job 👏👏👏
А я вот и думаю,почему у меня двери по низам не сходятся ,а толщиномер бьет по заводу
Не бита не крашена😄😂
Great job 😊😊
โอ้ย..สวยงานดี
Besser geht's nicht... Solche Handwerker sollte es mal hier in Deutschland geben bzw wenn, dann sind sie nicht bezahlbar! Hier hätte man dem Kunden gesagt "Totalschaden da ist nichts zu machen"... Ich möchte mal gerne wissen, in welchem Land der Kunde wie viel bezahlt hat. Eine fantastische Arbeit !!!
Wow, that's amazing!
Amazing work but I wished he’d wear a mask when welding
A esto se le llama un trabajo bien hecho ,,
Страшно подумать,кому достанется эта машина 🤦♂️
Когда гаснет все это гнить из Нутри
Вы в цвет не попали от слова совсем
Это не критично. Вода не попадает в зазоры, да и ладно.
Не битая, не крашенная)). Хорошо сделал - не придерешься.
Good job my friend!
Молодцы😂
А наш москвич и тот китайский пазор😢
Amazing 🔥💪👍
Не бита, не крашена)))
Professional in the connecting
Good job ! Do you need to change "impact sensors" after an accident?
Trampo fino de qualidade 👍
God job !👍😉
👏👏👏👏👍👍👍👍 so good bro
Very cool job!👌😊 perfect! Good! Hi!
Excellent job👍