By default it should be thru remote start to give start command. If you want to change to local (display start button) or remote you can do it thru parameter 8020
You can use remote start input at any of the machines in the system or you can enable local start at the parameter 8020, then you can start thru the display panel.
I just followed all steps. It seems easy but the process stopped waiting for the can connector. I replaced the can connector but process is not completing, it doesn’t detect the connector
sir ji ma 2 years sa Atlas Copco compressor ka kam Dealer ka yaha kar RHA hu ma Atlas Copco company ma lag sakta hu kya
Hello.. Good Video.. Question: What is the password for setting gen mod QC4001? Is 2003 too?
Should be
How can be config pms with remote start ?
By default it should be thru remote start to give start command. If you want to change to local (display start button) or remote you can do it thru parameter 8020
Hello, When I completed the setting .If I put it on auto mode,how can I start the machines? Thanks
You can use remote start input at any of the machines in the system or you can enable local start at the parameter 8020, then you can start thru the display panel.
I forgot to mention, that for both way, system must be un AUTO!
I just followed all steps. It seems easy but the process stopped waiting for the can connector. I replaced the can connector but process is not completing, it doesn’t detect the connector
Hola Daniel, debes de revisar que los cables CAN esten correctos y asegurate que la unidades estan en Power Management @ Parametro 6070
compressor ka kam 6 years sa kar RHA hu
ma ITI pass hu
Phone number Sir
Helllo Vella, please go to the website, choose your country and then you will find the contact information. www.atlascopco.com/power-generator