Sir what if hindi ko na iexhange ang internals, yung keyblade nung bagong casing lang ang ipaduplicate ko, masstart kaya ang auto? Kung need nung transponder signal, baka pwede ilagay ko yung transponder key tsaka yung new key sa isang keyring para ma detect parin yung transponder signal pero yung bagong susi na walang internals ipang ignition ko.
Basically, ipagsama ko yung luma at bagong susi sa isang KEYRING, magkasama parin para madetect ang transponder signal para di ma trigger ang immobilizer
I haven’t tried pero feeling ko gagana as long as katabi or malapit yung transponder sa ignition. Try nyo nalang sir if di gumana ilipat nyo nalang transponder sa new casing na may bagong duplicate
It will be expensive for sure if sa casa. Since your issue is only the rusted screw, try to drill it out using a small drill bit, if not try to pry open using a flat head, there are alot of replacement key fob cases sold in Lazada and Shopee. ☺️
@@staticmike sorry sa abala sir, last na, what if bumili ako ng flip key tapos yung blade lang niya iduplicate ko, hindi ko iswitch ang internals. Gagana kaya sa ignition or sa doors lang? Bale for aesthetic reasons nalang kaya mag flip key kasi yung key blade feature lang duduplicate.
@@pierremarcel8247 Hindi po siya mag wowork since need nyo itransfer yung immobilizer sa kabilang case, hindi mag start sasakyn nyo pag wala yang immobilizer. Eto po link ng version 1 flip key where in need mo pa mag hinang s.lazada.com.ph/s.fBYje Yung sa video I showed is version 2 where in transfer mo lang yung immobilizer and duplicate sa kabilang flipkey case no need hinang same sa video na ginawa ko s.lazada.com.ph/s.fBYkk
Sir duplicated key un nakalagay na sa flip key mo? Pano po sumakto un duplicated key sa nilagyan mo na flip key case? Sasabihin lang ba sa mag duduplicate un or pano po ba sir? Ty
Hindi pa po sir duplicated yung nasa vid po, blank key blade pa po yun. Yung nag duduplicate na po bahala sir, 150 lang po paduplicate sir. Sana makatulong po hehe
Is it same as my flipkey or different? I’ve been using my flipkey eversince I posted my tutorial video. Only thing I replaced was my battery for the remote.
@@9Sumerian It’s weird that it doesnt work, maybe the transponder in the jimny is placed differently from the ertiga. Try removing the immobilizer from the flip key, put on your keys and put the immobilizer close to the ignition switch
You have to remove the sensor from the old key and put it in the new flip key, otherwise vehicle will show key error on the dash board and will not start.
That works for the flipkey version 1. I am aware of that but this video shows flipkey version 2 which doesn't require soldering and transferring of chip. Do some research aswell 🙂
@@staticmike it shows in speedometer screen...keys blinks..I just come to know that we have to replace one small transponder which is inside outer cover..
@@beingaero Maybe you bought the version 1 flipkey where in you need to transfer the chip, in my video it is a version 2 flip key for suzuki keys no need for soldering or transfering of chip.
How do u remove the old blade and put it in to the flip cover?
You have to go to key maker he will cut it for you accordingly
Sir, apat na variations po pagpilian, alin po dun pipiliin? Ertiga GL 2020 po kotse ko. Salamat
Frfe hii ehegeghsheheh💐❤️🩹 0:17
Bro can i use this case for my Baleno 2024 model ??
will that key work for starting the engine?
Yes, You’re just gonna change the casing of your car key. From normal key to flip key
No without sensor it wont work
@RC7EXPLORER the transponder is inside the remote. It'll work to start the car.
@@rs3950 are you sure?
@@GirishTN63 yes
🎉
What about chip???
Sir what if hindi ko na iexhange ang internals, yung keyblade nung bagong casing lang ang ipaduplicate ko, masstart kaya ang auto? Kung need nung transponder signal, baka pwede ilagay ko yung transponder key tsaka yung new key sa isang keyring para ma detect parin yung transponder signal pero yung bagong susi na walang internals ipang ignition ko.
Basically, ipagsama ko yung luma at bagong susi sa isang KEYRING, magkasama parin para madetect ang transponder signal para di ma trigger ang immobilizer
I haven’t tried pero feeling ko gagana as long as katabi or malapit yung transponder sa ignition. Try nyo nalang sir if di gumana ilipat nyo nalang transponder sa new casing na may bagong duplicate
Sir rusted screw driver for the original key hindi mapalitan ang battery, mag rereplace kaya ang CASA ng key fob?
It will be expensive for sure if sa casa. Since your issue is only the rusted screw, try to drill it out using a small drill bit, if not try to pry open using a flat head, there are alot of replacement key fob cases sold in Lazada and Shopee. ☺️
@@staticmike sorry sa abala sir, last na, what if bumili ako ng flip key tapos yung blade lang niya iduplicate ko, hindi ko iswitch ang internals. Gagana kaya sa ignition or sa doors lang? Bale for aesthetic reasons nalang kaya mag flip key kasi yung key blade feature lang duduplicate.
@@pierremarcel8247 Hindi po siya mag wowork since need nyo itransfer yung immobilizer sa kabilang case, hindi mag start sasakyn nyo pag wala yang immobilizer.
Eto po link ng version 1 flip key where in need mo pa mag hinang s.lazada.com.ph/s.fBYje
Yung sa video I showed is version 2 where in transfer mo lang yung immobilizer and duplicate sa kabilang flipkey case no need hinang same sa video na ginawa ko s.lazada.com.ph/s.fBYkk
Sir duplicated key un nakalagay na sa flip key mo? Pano po sumakto un duplicated key sa nilagyan mo na flip key case? Sasabihin lang ba sa mag duduplicate un or pano po ba sir? Ty
Hindi pa po sir duplicated yung nasa vid po, blank key blade pa po yun. Yung nag duduplicate na po bahala sir, 150 lang po paduplicate sir. Sana makatulong po hehe
sir yung key need pa ipa duplicate ?
Yes po sir. Blank key po pag binili nyo sa shopee yung flipkey po ☺ Nasa 150 lang po duplicate po nyan, yung link po nasa description po
Vevik😮
Magnet sensor kaun lagayega?
th-cam.com/video/Ql91V-wEUrE/w-d-xo.html
sir yung key ko may lining pero yung flip key ko wala. cmpatible kaya yun?
Hindi siya compatible sir. s.lazada.com.ph/s.fm1VK dito sir sa link na to may mabibili kayo single or double cut sa key blade sana makatulong hehe 😁
Pwde po ba ito sa suzuki ciaz 2018? Thank you@@staticmike
And Jimny 2018>
Thankyou for reminding 😁 Will add to the description.
I have a jimny 2019 , that didn't work for me , the car won't start 🤷🏻♂️
Is it same as my flipkey or different? I’ve been using my flipkey eversince I posted my tutorial video. Only thing I replaced was my battery for the remote.
@@staticmike yes same , my immobilizer is in the battery shell
@@9Sumerian It’s weird that it doesnt work, maybe the transponder in the jimny is placed differently from the ertiga. Try removing the immobilizer from the flip key, put on your keys and put the immobilizer close to the ignition switch
You have to remove the sensor from the old key and put it in the new flip key, otherwise vehicle will show key error on the dash board and will not start.
That works for the flipkey version 1. I am aware of that but this video shows flipkey version 2 which doesn't require soldering and transferring of chip. Do some research aswell 🙂
th-cam.com/video/Ql91V-wEUrE/w-d-xo.html
. fgggf(sfvjjpiffjg
What is name this key remote
Suzuki Flip Key Version 2
Kya price hai iski or kaha par milegi
It shows immobilizer error...what to do?
How did you know there is an error? Try replacing the battery from the remote itself
@@staticmike it shows in speedometer screen...keys blinks..I just come to know that we have to replace one small transponder which is inside outer cover..
@@beingaero Maybe you bought the version 1 flipkey where in you need to transfer the chip, in my video it is a version 2 flip key for suzuki keys no need for soldering or transfering of chip.
in old key there is small black cube it is very small you need to transfer it to new key