Tusk Motorcycle & ATV Tach/Hour Meter

แชร์
ฝัง
  • เผยแพร่เมื่อ 20 ต.ค. 2024

ความคิดเห็น • 63

  • @atomflyer44
    @atomflyer44 3 ปีที่แล้ว +6

    I wish you would have shown putting the wire into the unit. It doesn't come attached, AND, wish you'd show actual installation on a bike or ATV.

    • @Supernova869-s4i
      @Supernova869-s4i หลายเดือนก่อน

      Iv just installed a hour metre does 0.3 mean 18 minutes ?

  • @96joe
    @96joe 6 ปีที่แล้ว +6

    WOW.. I didn’t know you guys made these. I feel stupid (I buy a lot of Tusk products 👌) I’m definitely buying this and the bracket from now on save my self a ton of money. And I agree 💯 with Chase hour meter is a requirement in my book.

    • @rmatvmc
      @rmatvmc  6 ปีที่แล้ว +1

      Thanks *Joe Knutson* , we appreciate your support! Agreed, an hour meter is a must.

    • @Supernova869-s4i
      @Supernova869-s4i หลายเดือนก่อน

      Iv just installed a hour metre does 0.3 mean 18 minutes ?

  • @connersnow298
    @connersnow298 3 ปีที่แล้ว +1

    Awesome vid and edits and filming and shop and product

  • @drabbag
    @drabbag 4 ปีที่แล้ว +1

    Does it have a standard tachometer function for setting the idle properly? I have two Hondas (CRF50 and CRF110) and would like to set them properly. Thanks!

    • @rmatvmc
      @rmatvmc  4 ปีที่แล้ว

      Yes, this has that function.

  • @motorfntrash4254
    @motorfntrash4254 ปีที่แล้ว

    Will it tell you how many hours the bike has even though u don't now how many it has

  • @Shecks392
    @Shecks392 2 ปีที่แล้ว

    Wow didn’t know about this what if I just bought a raptor and I don’t have this yet but already used my quad will it tell me how many hours I’ve used it and start there or will it start at 0?

    • @rmatvmc
      @rmatvmc  2 ปีที่แล้ว

      This tach/hour meter will start at 0 hours from when it is installed.

  • @ememcleaning4543
    @ememcleaning4543 5 หลายเดือนก่อน

    You didn't say how to reset it to zero though

  • @shanesmith6282
    @shanesmith6282 4 ปีที่แล้ว +1

    Installing mine right now no double sided tape in my box threw off my install bc I have to go buy some now

    • @Supernova869-s4i
      @Supernova869-s4i หลายเดือนก่อน

      Iv just installed a hour metre does 0.3 mean 18 minutes ?

  • @Supernova869-s4i
    @Supernova869-s4i หลายเดือนก่อน

    Iv just installed a hour metre does 0.3 mean 18 minutes ?

    • @rmatvmc
      @rmatvmc  หลายเดือนก่อน +1

      Correct.

  • @vetaiasadranu8087
    @vetaiasadranu8087 2 ปีที่แล้ว +1

    Hey I got a Honda crf 450 04 and I’m wonder what pr do I set it to on the meter

    • @rmatvmc
      @rmatvmc  2 ปีที่แล้ว

      Your bike should use the 1P2R. It should be pretty easy to tell if you scroll through the options with the bike at idle. You will get abnormally high idle readings on the wrong settings.

  • @joesalz5595
    @joesalz5595 ปีที่แล้ว

    Can a person lengthen the wire for a SxS installation?

  • @roberthaberman9491
    @roberthaberman9491 ปีที่แล้ว

    After in on a trx300ex rpm is reading too high. The lowest I could get was about 5000 at idle with 2p1r. The other two setting get higher. It should idle around 1400.

    • @Holgrinator
      @Holgrinator ปีที่แล้ว

      Seems like an issue with your unit if you know the rpms are lower. 2 pulses for 1 revolution (2p1r) wouldn’t be right for your 300ex. That would essentially be a spark every time the piston hit TDC and BDC. 1p1r is most likely as most 4stroke quads and dirt bikes actually spark every revolution of the crank. Once at TDC before the power stroke and once at TDC before the intake stroke. But Rocky Mountain has replied on other comments saying 2p1r is correct for typical dirt bikes and quads. It’s likely a Chinese product with a tusk sticker slapped on it so who knows. Many of their comments say to just try different options til you find one that seems accurate.

    • @roberthaberman9491
      @roberthaberman9491 ปีที่แล้ว

      @Holgrinator I think it was the unit. I switch to a trail tech and it works great. I was picking up extra pulses from being too close to other wires. I insulated it with some fuel hose. This got it down around 1400 but it would still fluctuate about 500 rpms up and down.

  • @innerfire-graham9016
    @innerfire-graham9016 3 ปีที่แล้ว +1

    How many sparks per revolution is my 2021 YZ250X?

    • @rmatvmc
      @rmatvmc  3 ปีที่แล้ว +1

      Your bike is a 2 stroke and should use 1P1R which stands for one pulse for one revolution.

    • @joshuabustos4146
      @joshuabustos4146 2 ปีที่แล้ว

      @@rmatvmc How many sparks per revolution is my 2022 Honda crf 250 r ?

    • @rmatvmc
      @rmatvmc  2 ปีที่แล้ว +1

      @@joshuabustos4146 Your bike should use the 1P2R. It should be pretty easy to tell if you scroll through the options with the bike at idle.

  • @TobySJCA
    @TobySJCA 5 ปีที่แล้ว +2

    Is it possible to run the tach in a continuous mode, where it shows the RPM, but does not stick on Max?
    For example, when I rev it up to 3,000, and let it drop to 2,000, it reads 2,000 without resetting?

    • @BurningBiscuit
      @BurningBiscuit 5 ปีที่แล้ว +2

      The default screen automatically displays current rpms on the first screen(hour meter screen)when the bike is running, the max RPM is a different screen.

    • @jasonpearson4983
      @jasonpearson4983 4 ปีที่แล้ว

      @@BurningBiscuit I just ordered one. And by looking at the videos and pictures it doesn't seem like there's enough room on the screen for the RPM to be there while the our numbers are there. Can you elaborate, thank you

    • @BurningBiscuit
      @BurningBiscuit 4 ปีที่แล้ว

      @@jasonpearson4983 start the bike with it on...

    • @TheonlyrealChester
      @TheonlyrealChester 4 ปีที่แล้ว

      @@BurningBiscuit I have one installed and can't get it to show rpm while running??

  • @emersonmoses1780
    @emersonmoses1780 ปีที่แล้ว

    Just bought this...why would they make the batteries non replaceable? Super upset...seems like a waste of my money. Wish I knew this before I cracked the package.

    • @GrotrianSeiler
      @GrotrianSeiler ปีที่แล้ว

      They’re only $35- and they last for like 6 years. After the battery wears out, you just buy another one. Simple. That’s if you even still have the bike after 6 years.

  • @alcombres725
    @alcombres725 2 ปีที่แล้ว

    I got a 2022 300 and I know it should be 1 pulse per revolution. But the tusk instructions say 2 pulse per revolution if it has a battery??? Seems weird it would be 2 pulses just cause it has a battery. Can you clarify?

    • @rmatvmc
      @rmatvmc  2 ปีที่แล้ว

      You may have to go through the settings after getting it installed on the bike to confirm the correct setting. As you scroll through the different pulse per revolution settings with your bike at idle, it should be pretty clear to tell which one is giving you the correct reading. You will see very high numbers with the pulse per revolution set incorrectly.

    • @alcombres725
      @alcombres725 2 ปีที่แล้ว

      Thank you for the reply.

  • @amitor1234
    @amitor1234 6 ปีที่แล้ว +1

    It comes with instructions? How to operate it ?

    • @Supernova869-s4i
      @Supernova869-s4i หลายเดือนก่อน

      Iv just installed a hour metre does 0.3 mean 18 minutes ?

  • @tferrill8748
    @tferrill8748 2 หลายเดือนก่อน

    What setting for a 2 stroke

    • @rmatvmc
      @rmatvmc  2 หลายเดือนก่อน

      Check out our quick setup of the Tusk Tach/Hour Meter: th-cam.com/video/6Kjs6RTsjdM/w-d-xo.html

  • @kells18
    @kells18 2 ปีที่แล้ว +1

    Say what, every 10hrs oil change, and every 20 valve check. That meter asking for a lot.

  • @1911ang
    @1911ang 2 ปีที่แล้ว

    Can some tell me please what happens when the battery is flat do you lose the hour?

    • @rmatvmc
      @rmatvmc  2 ปีที่แล้ว

      If the battery was drained you would lose the tech/hour display. The battery in the display has a 6 year battery life and many last even longer than that.

  • @michaelpresey2273
    @michaelpresey2273 2 ปีที่แล้ว

    Can you reset the main hour meter ? Say if you just did a rebuild and you want to reset it back to 0 is that possible ?

    • @rmatvmc
      @rmatvmc  2 ปีที่แล้ว

      The maintenance hours can be reset but the total run hours cannot.

    • @michaelpresey2273
      @michaelpresey2273 2 ปีที่แล้ว

      @@rmatvmc darn I guess I’ll just have to buy another one

  • @bryanpakula5243
    @bryanpakula5243 3 ปีที่แล้ว +1

    Can someone help me please? Got this Tush Tach meter but I am not sure what to ser. I have got Yamaha Grizzly 600, 1C,4stroke, same engine as Yamaha XT 600 .I am not sure whether to set 1P1R or 1P2R. I think it should be 1P1R but I am not sure. Thanks a lot!

    • @Supernova869-s4i
      @Supernova869-s4i หลายเดือนก่อน

      Iv just installed a hour metre does 0.3 mean 18 minutes ?

  • @Holgrinator
    @Holgrinator ปีที่แล้ว

    Putting on a used bike with 104 hours. Any way to add the additional hours into the meter before I install so it matches the bike? (Don’t want to buy the $300 gytr power tuner just to see the hours each time)

    • @Supernova869-s4i
      @Supernova869-s4i หลายเดือนก่อน

      Iv just installed a hour metre does 0.3 mean 18 minutes ?

  • @sparky_zap69
    @sparky_zap69 5 ปีที่แล้ว

    Trying to figure out how often my 04 CRF250R fires... I have it set up on the t2 firing option in the hour meter, but I was out for a few hours today and it only registered for 1.4 hours... just seems wrong to me but I’m having trouble finding how often my bike fires

    • @rmatvmc
      @rmatvmc  5 ปีที่แล้ว +2

      Kris, I'd set it to T1 and see how that works. Generally, with 4-strokes, you will want it on T1.

    • @sparky_zap69
      @sparky_zap69 5 ปีที่แล้ว +2

      Rocky Mountain ATV MC thank you. The instructions weren’t really clear on what it should or shouldn’t be set to, and googling didn’t really help much. I appreciate the quick response. You guys are awesome! I wish the free shipping thing worked for us up here in the great white north too haha 😂

  • @timothyhaskell8262
    @timothyhaskell8262 2 ปีที่แล้ว

    What pulse setting would I use for a Drz400s?

    • @rmatvmc
      @rmatvmc  2 ปีที่แล้ว

      Your bike should use 2P1R. You can also look up your bike's idle speed and scroll through the settings until you see the correct reading.

    • @Holgrinator
      @Holgrinator ปีที่แล้ว

      @@rmatvmc that doesn’t make much sense. 2pulses of the spark plug per one revolution of the crank? So for a 4 stroke it’s makes an intake stroke, pulses, makes a compression stroke then pulses again (that’s one revolution of the crank) makes a power stroke, pulses again, then makes an exhaust stroke and pulses again. Each stroke is half a rotation of the crank. Setting it to 2pulses ever 1revolution is 1 per stroke of the piston.

  • @hommie241
    @hommie241 4 ปีที่แล้ว +1

    Does it have replaceable battery

    • @rmatvmc
      @rmatvmc  4 ปีที่แล้ว

      This battery is not replaceable but has a 6 year battery life.

    • @nighthawkj30A4
      @nighthawkj30A4 4 ปีที่แล้ว +1

      Rocky Mountain ATV MC they should make it otherwise this is just a disposable unit. Kinda a waste if has to be replaced every 6 years.

    • @ColaFx
      @ColaFx 4 ปีที่แล้ว

      in 6 years thats junk already so how its waste if you throw it into recycle

    • @emersonmoses1780
      @emersonmoses1780 ปีที่แล้ว

      Didn’t notice this until I bought it. Super upset and waste of money. When this junk dies I’m upgrading to a nicer unit from a different company. Can get ones that you can adjust the hours if needed so I’ll just add whatever hours this one dies at.

  • @larrywalden626
    @larrywalden626 หลายเดือนก่อน

    Oil change every 10hrs? That's insane for a ATV. Lol. Who does that?