Now my car makes a knocking sound and vibrates on the driver side....but today someone told me my motor mount is no good ...I have the same car ...does that mount you replaced make the noise on the driver side too?
Thanks for the video. Do I have to replace the whole thing like you did if I only have the Torgue Strut Engine Mount torn (the rubber part)? Do I also have to use a jack in case?
Do you need a large jack to lift up the car underneath the oil pan? I have the 3 ton jack stand. Would it be safe to use under the oil pan with some piece of wood or such?
Make sure that your car is not misfiring and does it shay when in gear and foot on the brake is yes bad motor get something and pry against tje motor mount one by one and any one make the car vibration let when you pry it is the bad mount or if it only shake when you press the gas and stop when you let go of the gas is bad cv axle
Thanks for this. I took my Versa in for the airbag recall and they wanted $655 for that
Dang they quoted me at 225 when I went in for my air bag recall.
What year was your recall
Parts included?
Thank you so much! I can do it now.
Thanks for the video, this really helps me a lot. Wish I had your tools though.
Is it the same for a 2014 ??
Now my car makes a knocking sound and vibrates on the driver side....but today someone told me my motor mount is no good ...I have the same car ...does that mount you replaced make the noise on the driver side too?
What is the torque-value on the mounting bolts?
Tight
@@michaelsanders9506 lol
I have impact wrench what type of socket extension do I need
What tool are you using I have socket and it’s much more difficult
What year is the car?
Where are you placing the jack?
Thanks for the video. Do I have to replace the whole thing like you did if I only have the Torgue Strut Engine Mount torn (the rubber part)? Do I also have to use a jack in case?
If you replacing just the torque strut you dont need a jack but if you replacing the engine mount you need tha jack
Dullah Goso hard hey what size sockets do I need?
I would like too see front left replacement onmounting onto the gearbox plse
Was it necessary
To take off the metal attach to the main engine mount
No, it isn't.
Nah just two bolts and that's it
Do you need a large jack to lift up the car underneath the oil pan? I have the 3 ton jack stand. Would it be safe to use under the oil pan with some piece of wood or such?
Matthew Neal yes its just to lift up the engine not the car
Dullah Goso hard I meant to say my floor jack is the small 3 ton one at walmart. And I only lift it maybe and inch?
Matthew Neal yes thats fine just put some wood block to make up for of the limits of the jack
@@DULLAHGOSOHARD Where do you jack it up from?
@@AD-eq4kn on the engine oil pan
super
Yow. I have a tiida and it a shake when I press the gas and goes away after. A which mount I would need to change
Make sure that your car is not misfiring and does it shay when in gear and foot on the brake is yes bad motor get something and pry against tje motor mount one by one and any one make the car vibration let when you pry it is the bad mount or if it only shake when you press the gas and stop when you let go of the gas is bad cv axle
Great video. Made this repair a breeze.
Need to speak up your audio is like trying to hear a mouse speak. Besides that good video
How to change transmission mount?
Por favor Cómo se cambia el compresor del aire acondicionado.
what's the part number and where to buy? Thanks.
Nm?
No torque?
This cover a 98 torq mount. This thing looks all bunged out and rubber beat to death.
I hear a slight Jamaican accent
Nissan is a big pile of Junk
Can't hear you
why should I need to pay to watch a video on How To on you tube!!!!!
Sheryl Sable what are you talking about