ROCKBROS RHL1000 Headlight
ฝัง
- เผยแพร่เมื่อ 22 ส.ค. 2024
- Unboxing , Assembly and testing of the ROCKBROS RHL1000 bicycle headlamp. Overall the RHL1000 performed very well and the build quality is good for the price. I would suggest getting your own toolkit since the one that coms isn't precise.
Finally someone who did a decent video showing it outside.
It has made me change my mind about getting it though as it shows it has a very narrow beam at a distance. Shame.
Yeah it is kind of narrow. I am in the search for a good flood light that doesn't break the bank.
@@YuichiTamaki i have newboler lig520 this is the same as rockbros r3 1000 only cheaper, its beam is much wider. I recomend.
@@YuichiTamaki
I ended up buying a light bar light.
Search for 6000 lumen bicycle light and you'll see lots of the same.
Mine has 5 LEDs, the brightest and widest.
It has dipped beam, high beam, combined, spot and flashing for daylight.
Newboler sells a version too.
Was about the same price as the Rockbros.
Ahhhh I read the comment late, I just bought a new light. Review coming soon.... Thank you very much!
Thank you so much for supporting ROCKBROS products! Your feedback means a lot to us, and we're delighted to have your support. Rock on with ROCKBROS!
It's truly my pleasure! I greatly appreciate your commitment to delivering budget-friendly products for the cycling community. Keep up the good work!!!
i bought the DM1000, with bracket(no instructions). Used your video to help with bracket install. Thanks !
Niiiice!!! I am so glad it helped you! Yeah they come without instructions XD
My unit broke when I dropped it from 1m height onto solid ground. I was able to fix it by taking it apart (there are 4 screws around the USB port, then the back part pops off and the whole assembly pushes out). I put a large washer in between the battery terminal and the battery holder and then the tab to the battery made good contact again. Use the largest size washer that fits so it doesn't turn off going over big bumps. The battery is not well supported in the holder from the factory.
I also put some grease/thermal paste in between the metal case and the LED module before sliding the assembly back in. This enhances cooling ---> more brightness and longer lifespan.
You should do a waterproof test on it that sure that alot of people will like your videos
Xavier! Thank you a lot for the feedback I will try to do a video of that! Have a good day!
@@YuichiTamaki You too!
I have the same unit. After taking it apart, I conclude that the level of waterproofness should be very good as long as the button portion protects against water infiltration (which it should). The circuit board is entirely at the top, so even if water got inside, it should stay below the electronics. The screws on the back were sealed with glue and the USB charging cable cover makes a good seal.
My unit broke when I dropped it from 1m height onto solid ground, but I was able to fix it by putting a large washer in between the battery terminal and the battery holder. The battery is not well supported in the holder from the factory.
I also put some thermal paste in between the metal case and the LED module to enhance cooling ---> more brightness and longer lifespan.
What's difference between this ans thé R3-1000? It looks that both has same LED
r3-1000 its beam is much wider
@@SuperTriodещё у него светотеневая граница не такая резкая. Это и плюс и минус.
Hey man my speedometer is xoss g+ is it compatible with the rockbros speedo mount?
Hello there, It looks like the mount in the XOSS is Garmin style so it should be compatible. The flashlight mount comes with two adapters. On the Aliexpress page it says it is compatible with Garmin, Bryton and Wahoo.
Xin giá đèn
Around 35 USD.
Giá bao nhiêu một cái ạ
mua trên amazon 29 USD