I had no idea u had a new channel! Lets goooo! Your builds are my favorite! Someone who isn't afraid of peoples opinions or criticism building what he wants!
Just wanted to say thanks again for this video phong! I am going to be porting my oil pump in the morning since my burrs just got here and this helped tremendously. Can't wait!
Amazing porting job phong 🤙🤙 would you share with us how you done the dimple port on the intake side of the cylinder head ? Thanks man I love your work
Keeping those porting tools in check is hard af Always tryin to dance around, or get bound up. I think Phong might have a smidge of practice lol Love the content good sir
Well I just subscribed because you are on PFI boostedboiz but I haven't seen you on goofy Channel but I've seen your truck that you made in the back of that truck is awesome now you have a new subscriber and I'm glad to join stay safe from that virus my friend
Amazing work! I am curious though at what point will that pump start aerating? Especially since you're turning so many RPM. it would almost be beneficial to slow down the pump speed. it wouldn't affect pressure especially since you have such a high idle and it would reduce aeration in the pump when your at 9-10k rpm. I would compare gear sizes to the S2000 pump. The pump doesn't care how fast the engine is spinning it's going to deliver whatever flow is required and bypass the rest. so there's margin there to reduce the gear size and keep from aerating. Just some ideas
Did not understand very clearly the part about the spring... what did you do? Add the 10mm washer and thats it? Or did you do any other thing? Please let me know
Hi, I really admire your work, I saw your video where you porting on the k20 a2 engine oil pump, I would like to know what size ring you use to give pressure to the spring
Great video👍. How is it in basically every form of motorsport Ive come across, theres a humble dude in the background like Phong with knowledge, a die grinder, and a burr bit buffet ready to make you go faster??lol... Example: I have an '03 Suzuki RM 250 that has had extensive cylinder porting.... idk why or how or what im lookin at in there, but I do know if Im jetted right it hits harder off the bottom than any 2stroke Ive ever ridden and wrecked both knees and collarbone of the previous owner lol...
Nice to see that trick on the k20 oil pump so we don’t have to buy aftermarket for a while. I have a question Phong, how can we make a d16 crx engine perform better n/a in such a little environment?
Now! Here's a good channel, And, a great hat!!!!!!! Awesome positive Phong. N/A All day!!!! Almost similar to deburring to increase flow? Would going dry some be an idea, or too much work for too little?
Hey Phong what ever happened to the car Brent and the boiz bought ya ?haven't seen nor herd anything of it since that day but anyways great vid and info bud godbless
I like that you show the whole process from start to finish. Your content is good, your clips of you speaking are very quiet, and the tool is loud. Balancing those sound levels would improve your videos. Upload some short test videos as "private" on TH-cam and test and tune! I'm enjoying your videos, keep it up. :)
Hey Pong Just a question in regards to your port here. I see you knocked down the little hump thats in the casting to help direct the oil over to relief port. Are you sure thats ok to knock down that hump so much? Thanks man!
Hey bro really appreciate everything you do you are truly a motivation to all of us just wandering though would you be willing to do a port and Polish job on A D16Y8 head? I am in tacoma wa.
Anyone know how i could fix a 6.0 ls cam journal by hand it had a spun cam bearing and rod bearing wasn’t very bad but would like someone to help me learn to do this with out going to the machine shop and on low budget
Hey Phong! I was so excited seeing a notification you posted. You’re the man!
Nice break down phong! I like the jig!
Trust Phong to have a 1st rate jig set up eh. The guy is a human swiss army knife.
I'm in the UK and I love it 😎 thanks
The smile at the end when saying: More horsepower 👍 😎
Great job, keep going to your future. God bless you and your family.
That channel looks smooth now.
.man you are so good at what you do
Love the name but I feel you're not capitalising on how many people know the name 'All Motor Phong' .
Should say "unknown journey with all motor phong"
maverick buckley it’s crazy to name it some obscure name and not cashin on the bit of notoriety he has ...must not like money or subscribers ..
We all love good oil pressure
Would like to see a head porting video.. nice job phong...
Phong sharing with the world how to go fast!
Thanks Phong
Amazing video man, this will help many for years to come.
Sweet
good sharing...mr phong..
very important to the kswap user..
🥰🥰🥰
Phong is a genius, true master at his crafts
I had no idea u had a new channel! Lets goooo! Your builds are my favorite! Someone who isn't afraid of peoples opinions or criticism building what he wants!
Good stuff Phong
nice work good to see how you do your porting work.
Thank you phong for sharing your wisdom
Great job buddy! Thanks for sharing 👍👍
Thanks phong! Excellent tutorial on improved flow and pressure increase for a stock pump.
Nice job on the how to, came out really nice.
Just wanted to say thanks again for this video phong! I am going to be porting my oil pump in the morning since my burrs just got here and this helped tremendously. Can't wait!
Thank you Phong!! Great video tutorial, please keep making these kind of videos!!
This is a great port job! This is the correct way to get you to rev out to 9krpm
Amazing porting job phong 🤙🤙 would you share with us how you done the dimple port on the intake side of the cylinder head ? Thanks man I love your work
superb!
Thanks Anh Phong!!!! I learn so much bro.
Keeping those porting tools in check is hard af
Always tryin to dance around, or get bound up.
I think Phong might have a smidge of practice lol
Love the content good sir
Phong you are the man.
Great stuff Phong
This is the Type of Video that would help so many , So keep them coming
From London
Good detailed information thanks dude
Dang if I knew phong had a youtube channel ❤
Great work if only you leaved closer I would have you do my Build. NJ 😎👍
That's really nice Phong I like that thanks for showing us. Now time for me to get to work...
Looks good you always do some awesome work love the channel
Lets go
Nice work man I learned a lot in this video 👍
Thank you Phong!!! You are the man 🤟
Keep up the great work phong! You have a magic touch when it comes to honda engines.
Great job Phong! Just found your channel and will be waiting for your next post!
Heck yeah man
👍👍from this guy
Thanks dude, this video helped alot. But the sound made my cats freak out lol
Great video phong, thanks for the tips :)
Well I just subscribed because you are on PFI boostedboiz but I haven't seen you on goofy Channel but I've seen your truck that you made in the back of that truck is awesome now you have a new subscriber and I'm glad to join stay safe from that virus my friend
Amazing work! I am curious though at what point will that pump start aerating? Especially since you're turning so many RPM. it would almost be beneficial to slow down the pump speed. it wouldn't affect pressure especially since you have such a high idle and it would reduce aeration in the pump when your at 9-10k rpm. I would compare gear sizes to the S2000 pump. The pump doesn't care how fast the engine is spinning it's going to deliver whatever flow is required and bypass the rest. so there's margin there to reduce the gear size and keep from aerating. Just some ideas
Love the videos. All work and little talking
Thanks for the good info.
Great video!
Knowledge is power Phong power
Looks great thanks for the tip
Looking good! Thanks!
This was much better then watching a bunch of honda kids hacking it up with their dad's knock off dremel tool...
Phong doing his thing! A1 porting
Nice work!
Did not understand very clearly the part about the spring... what did you do? Add the 10mm washer and thats it? Or did you do any other thing? Please let me know
Can you also grind out the “ valley” parts in the oil pump gear to increase volume or better to leave alone?
Hi, I really admire your work, I saw your video where you porting on the k20 a2 engine oil pump, I would like to know what size ring you use to give pressure to the spring
Phong is a legend 💎
Man i see you do alot of things your man iam the same way i love working on my cars i hope to get me a prelude soon
Damn phong thats a good idea ..nice video n nice to see you 💪💪
Great video👍. How is it in basically every form of motorsport Ive come across, theres a humble dude in the background like Phong with knowledge, a die grinder, and a burr bit buffet ready to make you go faster??lol... Example: I have an '03 Suzuki RM 250 that has had extensive cylinder porting.... idk why or how or what im lookin at in there, but I do know if Im jetted right it hits harder off the bottom than any 2stroke Ive ever ridden and wrecked both knees and collarbone of the previous owner lol...
Nice to see that trick on the k20 oil pump so we don’t have to buy aftermarket for a while. I have a question Phong, how can we make a d16 crx engine perform better n/a in such a little environment?
Great video man!
Now! Here's a good channel,
And, a great hat!!!!!!!
Awesome positive Phong.
N/A All day!!!!
Almost similar to deburring to increase flow?
Would going dry some be an idea, or too much work for too little?
Can something like this be done to the H22 oil pump.. and can I do the washer trick to get more oil pressure on h22
Always wondered how they ported it in 4pr
I am entirely too high for that camera to be shaking that much.
👍👍👍tech tips
How will a wash will give in trems of oil pressure psi?
We want to see you take out the CRXs.
How thin is too thin? I might of ported too much on one side but im not sure. Anyway to test it?
☝🏻☝🏻 I like that. Good job
I just did this, boy was I freaking out lol.
I see you cut in to the wall a good amount how far or thickness do you recommend?
FC ครับ
Master phong i find you ✌🏽
Love the content man
Hey Phong what ever happened to the car Brent and the boiz bought ya ?haven't seen nor herd anything of it since that day but anyways great vid and info bud godbless
I like that you show the whole process from start to finish. Your content is good, your clips of you speaking are very quiet, and the tool is loud. Balancing those sound levels would improve your videos. Upload some short test videos as "private" on TH-cam and test and tune! I'm enjoying your videos, keep it up. :)
I radiused everything where the valvebody meets the trans on the case side once. 4L60e. Guy claimed 5mpg better.
Hey Pong
Just a question in regards to your port here.
I see you knocked down the little hump thats in the casting to help direct the oil over to relief port.
Are you sure thats ok to knock down that hump so much?
Thanks man!
Work great!
Is that better than a type S oil pump?
Hey bro really appreciate everything you do you are truly a motivation to all of us just wandering though would you be willing to do a port and Polish job on A D16Y8 head? I am in tacoma wa.
85216johns I would love to work on those cylinder heads!!!
@@402motorsports4 Great How do I contact you for sending info
85216johns allmotorphong@gmail.com or instagram, allmotor_phong
Man good job og now i try this. I owe u a biwl of pho 🍜 😆
how much oil pressure extra from shim under there ?
15-20 psi more!!!
Feeling like being at the dentist
Ouch I can feel it in my teeth lol
Sometimes it's hard to tell the difference between the time lapse portions and Phong just moving faster than normal humans do.
We miss you phong!!! When you going to start making videos again!!!
Try to get back on TH-cam soon !
Anyone know how i could fix a 6.0 ls cam journal by hand it had a spun cam bearing and rod bearing wasn’t very bad but would like someone to help me learn to do this with out going to the machine shop and on low budget
Car asmr with phong
Nearly made me cry when u started grinding without covering that head in the background 😞
Phong is gangster
U takling to me??☺
Mopri sapooo de velllga
Damn phong thats a good idea ..nice video n nice to see you 💪💪