@@thepcphone Cheers, just did mine and the finger print sensor came off with the back. It appeared to be attached. I had a real job putting the cable back on the board. I'm assuming the sensor would have come off the back cover with a bit more force?. But all good in the end. Cheers for the video.
Hi, I replaced the battery and the charging port plate, I did the test and it started charging but then it stopped and never charged again, I'm going crazy..... can you help me. thanks
Hello, I have watched all your movie and replaced charging port step by step as you did. Battery is being charged well. But now vibration doesn't work :( It is turned on everywhere. What could go wrong during charging port replacement? Is vibration device located near charging port area? Could you help me?
sorry, did you mean the quality of the board or different pattern include the screw hole. ?? if different in shape yes that would be a problem. but in quality wise its fine. it does work on charging and data transfer .
OK, I was able to heat it off : ) the worst thing was that my back had been crushed (and it's glass : / but what is interesting, when I disassembled and assembled it - the port started to work again! No idea why : ) it charges!
![ตีสิบเดย์ [FULL] | อาจารย์โอเล่ ญาณสัมผัส ผ่าดวงคนดัง ประเทศไทยจะเป็นยังไงหลังจากนี้!](http://i.ytimg.com/vi/gszT2O76fL4/mqdefault.jpg)
Thanks man. You saved my wifes phone with your tutorial
Glad to hear that. Hope you will subscribe to our channel. Thanks
thank you bhai. phone got new life. was dead for about 15 days
Thanks❤❤
Super bro & useful video , great 👍
Thanks to your tutorial, i could save my Redmi 8 note pro with your advise for 10EUR :)
Hope to see you again into my channel! Please do subscribe to show your support ! Thanks.
Thank you for this totorial, thats helped me so much! ♥
Great idea to substitute the adhesive. Thanks!
No problem!Happy to help!Hope you would subscribe to my channel!Thanks
great video! one question: when you remove the back, isn't there a little cable that connects the fingerprint sensor? other video mention it...
I think there is !!
Yes, but it's only a problem if the camera board stays attached to the back cover as it's removed.
@@thepcphone Cheers, just did mine and the finger print sensor came off with the back. It appeared to be attached. I had a real job putting the cable back on the board. I'm assuming the sensor would have come off the back cover with a bit more force?. But all good in the end. Cheers for the video.
Great video man, I have to change my fpc connector on mainbord the issue is that it's a 2*25 pin, couldn't find it on Aliexpress, there is only 2*20
Appreciate the support, make sure to subscribe with notifications to keep up to date with new videos!
@@thepcphone a response maybe 🤔
Great stuff
Thanks pal...but is there any other way to resolve the charging socket with out replacement?
Use ur 1 braincell and think
Hi, I replaced the battery and the charging port plate, I did the test and it started charging but then it stopped and never charged again, I'm going crazy..... can you help me. thanks
thank you man!
Happy to help! Hope you would subscribe to my channel. Thanks for your time.
thanks
You're welcome 😊 Subscribe! Thanks
Hello, I have watched all your movie and replaced charging port step by step as you did. Battery is being charged well.
But now vibration doesn't work :( It is turned on everywhere. What could go wrong during charging port replacement? Is vibration device located near charging port area? Could you help me?
Yes, it is located beside charging port area. Thanks
Speaker is also connected to this charging patta ?
What did you glue this cover to?
Wht problem to change this part?
Good
Glad I could help, Hope you will subscribe to this channel. Thanks for your support.
Bro can u tell the cost of replacing port charge only I have another one but I want to change from shop keeper pls tell
Note 8 pro main mic proplem ,
Cit test ,main mic ,meter very low up ,,
Kya karna hoga??
Sir mujhe chahiye
Mere mobail me bhi ye problam hai
hello, original board and new board are different is it a problem ?
sorry, did you mean the quality of the board or different pattern include the screw hole. ?? if different in shape yes that would be a problem. but in quality wise its fine. it does work on charging and data transfer .
How much cost of new one
Do you sell new charging port?
Sorry, I don't have in stocks.
@@thepcphone any link bro?
They can be bought for pennies on AliExpres, Lazada, Shopee...
This fucking gluing that you have to heat OMFG...
OK, I was able to heat it off : ) the worst thing was that my back had been crushed (and it's glass : / but what is interesting, when I disassembled and assembled it - the port started to work again! No idea why : ) it charges!
can you show please how to clean it with Isopropyl Alcohol 99.9 %. Thank you
how you call that heating tool???
That heating tool is called a mf hairdryer
Mere redmi note 8 Pro ke type c point bohot hi jada garm ho rha h aysa kyu
What's the price of charging port
65.Hope you would subscribe to my channel to show your support. Thanks
my audio jack is not working
Same here
Where can buy original back cover from?
I don't think so that you can get the original back cover for it. But copy one is not bad !
How much it cost broo 😭
15 £
So in Indian rupees, shopkeeper would charge ₹1500/-
@@rohitfatarpekar7868 🤣🤣
Bro , maximum it would cost rupees 250
@@rohitfatarpekar7868 fuck bc 🥲. Mera toh bas jack kharab ho gaya hai.
How many millimeters of adhesive tape is it?
1 mm but still the tape would be wider than the screen frame ! You just need to play !