Good video, only problem with mine is that after setting the clock, it stays frozen on that time and never runs the clock. If I set of for 10:30am it will stay stuck on that time for hours. Any idea?
Anything is better, still cant get the clock to move from the time I set it....... Tried everything, The installer wants 85 bucks to even look at it, and Carrier tell me to call the installer.... DONE BUY IT.......
Hi, I have a TP-PHP01-A Edge thermostat, the control module is in the basement, so what's on my wall is a very slim unit, i think it's called the Display Module. I have a Carrier heat pump and a furnace. The display module is wired using only 2 wires (V+ and Vg - Red / Black) from the wall plate to a small, keyed 2-pin connector on the DM. It's all operating perfectly and I'm 100% satisfied with it, but I'd like to upgrade it to something that can connect to my home WiFi network. There's a bundle of wires behind the wall plate which aren't being used. I'm guessing that a new thermostat with WiFi will require more power, and maybe one of those unused wires might do the trick. I'm wondering if there's an upgrade from Carrier that will allow me to re-use as much of the existing equipment as possible, with the addition of WiFi? Thanks!
Press the two buttons on the bottom right simultaneously. It should display a 02 /f or 02/c . Press the button under the f or c then use the buttons on the right of the display to change it from f to c or from c to f.
This is the worst thermostat ever. The installer left no manual and it's hot as he** because of some stupid schedule. Thank goodness I found the manual online and have turned OFF the programming schedule. So much better to run it manually. My electric bill has dropped by running it manually so I have gained energy savings.
How to unlock and lock the thermostat
How do you remove this from the wall without damaging it! Doing repairs .....need to move it...
Why can't I set the cool setting below 70 degrees? Tried everything!
how you unlock the thermostat?
Does it have a battery or is it hard wired
I have this carrier unit having issues the the air conditioning wont turn off any ideas?
hey there ! for some reason my thermostate wont go from ON to AUTO for the fan system. do you have any ideas why ????
Good video, only problem with mine is that after setting the clock, it stays frozen on that time and never runs the clock. If I set of for 10:30am it will stay stuck on that time for hours. Any idea?
Me puede decir como hago para que suba la calefaccion a mas ze 75? No puedo hacerlo
Is lock unlock Display system in controller please tell me
Can I change from Fahrenheit to Celsius?
Why dont i have a cool mode option ? This house has this exact thermostat
What if the schedule does not show up
how come my edge thermostat under mode does not show cool?
Would u know why my shuts off an turns back off it goes blank
Anything is better, still cant get the clock to move from the time I set it....... Tried everything, The installer wants 85 bucks to even look at it, and Carrier tell me to call the installer.... DONE BUY IT.......
How did you get it fixed? i got exact same problem.
help, the hold word disappeared on the screen.......
Thank you so much! This video is a life saver
Where do you put the batteries in the fucker
What if the mode button will not switch to heat?
!!!
Mine has a blank screen suddenly. What is the cause?
Replace the internal battery.
@@scottl.3052 Is there one though?
@@scottl.3052 Hi, how does one do this ?? Thx
Hi, I have a TP-PHP01-A Edge thermostat, the control module is in the basement, so what's on my wall is a very slim unit, i think it's called the Display Module. I have a Carrier heat pump and a furnace. The display module is wired using only 2 wires (V+ and Vg - Red / Black) from the wall plate to a small, keyed 2-pin connector on the DM. It's all operating perfectly and I'm 100% satisfied with it, but I'd like to upgrade it to something that can connect to my home WiFi network. There's a bundle of wires behind the wall plate which aren't being used. I'm guessing that a new thermostat with WiFi will require more power, and maybe one of those unused wires might do the trick. I'm wondering if there's an upgrade from Carrier that will allow me to re-use as much of the existing equipment as possible, with the addition of WiFi? Thanks!
Hi, were you able to upgrade?
This is far to much work just to be warm. Its 39. Just can't turn it on to get the place hot
Secret to switching from Celsius to Fahrenheit ??
Press the two buttons on the bottom right simultaneously. It should display a 02 /f or 02/c . Press the button under the f or c then use the buttons on the right of the display to change it from f to c or from c to f.
you need to do a video like this for the advanced installers section.
Levi
Como faço para desbloquear termostato Carrie edge
This is the worst thermostat ever. The installer left no manual and it's hot as he** because of some stupid schedule. Thank goodness I found the manual online and have turned OFF the programming schedule. So much better to run it manually. My electric bill has dropped by running it manually so I have gained energy savings.
I agree this thing is a POS
Same issue here. How did you turn off your schedule???
How lock remote
Thank you so much for your video .
How i on?
Levi
This seems like too much work. I'm comparing this one to the new Leaf thermostat second generation
Thanks! -- Atco
Tinha que ter em português essa merda,esse controlador é uma dor de cabeça
Thank you so much! This video is a life saver!