Best content channel on barbering imo! Been watching you big dog for years now. Watched for years as Someone that cut hair on the side. Now I watch as a licensed barber with my own shop. Thank you for always giving nuggets and game away for free. Not just pertaining to this industry but faith as well. 🙏🏽✝️👊🏽
I'd say it's a good technique fading into shorter length, obviously longer length with only those two guards would end up with Clipper over comb and some shear work detailing in the end. I'll give it a shot. Good job man always 🙏🏼🏁💈
I use this technique personally i prefer doing this technique with an actual 0 guard not a wahl .5. You can do it with both but the wahl half guard cuts much closer than a typical 0 guard does. Which means open all the way takes more effort to blend into the 1.5. I love the technique personally it saves so much time. I do prefer doing fading up from the skin to the blade open but then fading down with the 1.5 open to the 0 closed. To me its more efficient than using the 0 guard first then the 1.5 because its hard to blend it like that you almost always end up having to grab the 0 guard again which at that point you should probably just grab the 1 guard if you have to grab the 0 again. If you do prefer using the .5 guard from wahl you can blend it into the 1.5 closed by scooping out without touching the head and free hand it into the 1.5 because it cuts too close if you dont. Saves a lot of corner blending work too. You can also scoop while using the heel of the blade and that works also
Great job!!! Squeak is a great barber I've followed him for years..I remember he use to use the 1&2 guard technique before he switched to this one both are amazing techniques that gives great results..
I use the stylecraft 0, jrl .5 or the andis 0 works best with this technique. depending on the 1.5 guard you use you may have to flick more to blend the line in. It just depends. I use stylecraft dubs 0 guard and the 1.5 because i like how flush the 1.5 guard cuts compared to others it just speeds up the process way faster. Once you get used to how much you need to flick or freehand to get the line out its easy and probably the fastest 2 guard technique out there. Same with the andis guards the 0 and the 1.5 blend in the same way
I learned this system from a Brazilian Barber and my fades have been a lot more blurrier and smoother. And it’s cut my time I’m down. At first I struggled to get used not using the 1 guard. But overall great system
Yup that system is what Ive been using for years. Super quick and takes all the guess work out of deciding which guards you need to use. Any hair longer than the 1 1/2 I just use scissor over comb. I do the steps a little differently but still it’s the most efficient system for speed and consistency in my opinion. Nice cut!
Yessur!! Can’t remember when I figured it out but I was like “there’s gotta be a more efficient way”. Took a min to get used to but it works. JRL Onyx go crazy too
Wow that cut was amazing. Truly talented and have perfected your craft. The S.Craft name suits you well good sir. Many blessings and much more success for you in the future.
Love it bro! Can always connect with the transparency u display I’m a have to give it a try. Sometime I fade from zero into 1 1/2 but never thought of attacking it in this order 🔥🔥🔥🔥
only thing I would recommend is using the jrl "0" or "1/2" guard. everything else has issues lifting the hair off the head. JRL half guard for me is the best half guard directly behind the OG andis purple 0 guard
Bro can I have some pointers on how to do a line up I just started n it becomes trickier with every customer. I've tried pulling the skin just to make sure I don't pull the hairline back, I've tried the machine, trimmers ever the throat razor the line up is not bad but I know I can do better
I don’t have an issue with the camera quality. I say let them keep that camera and you use the money on something else. Not counting your money, but put it to use elsewhere or even on yourself! Keep it going and thanks for sharing something new and highlighting others!!!
Love this system in theory. The 0 guard open essentially becomes your 1 closed, and your 1.5 closed becomes your 1 open. You only really miss the few clicks inbetween with the 1 guard, but can adapt by using the corners.
In addition, I’d like to know Shannon’s thoughts on all the different guards. I know Wahl premium seem to be the standard, but seems more people are starting to use Gamma or Babyliss guards these days.
Great content as always 🔥🔥 I love trying new techniques, it keeps the feeling of being too repetitive away. It also challenges your skill! Killed it G 💪🏼
I hear a lot of creators are moving away from the DSLR video format to using their phones. Phones do a pretty decent job when provided with good lighting. It gives it that sharp focus foreground while retaining that “boca” blur people like to associate with film/movie quality. Would love to see more iPhone videos if it means less work for you and more content brother. The quality comes from you teaching us the craft, the quantity is where we benefit. Nothing like them reps. God bless you and your fam hermano!
You can't put a stretch lever on the JRL, the bracket will not physically move past the groove/indent on the clipper body. JRL standard taper blade does open up A LOT (the lever in the middle with their taper blade is a TINY bit shorter than a Wahl lever fully open), but their fade blade fully lever open is similar to a Wahl lever open. I've tested out the measurements myself. Wahl fully open is 1.3mm, JRL taper blade lever midway is around 1.2mm, and JRL fully open with their fade blade is around 1.2mm. These numbers don't mean much, but people often think their lever opens up a lot more than a standard clipper, when on actual fact it's their taper blade is that which gives it the bigger open length, not the lever per se. You can put that blade on a Wahl and it'll open up the same
Yo S.Craft, You know you could record a movie with your iPhone right? Like record in cinema mode. Imagine what you could do with your iPhone. Just play with the settings on the camera until you see a crisp image to record with your iPhone. Btw your content is pure🔥🔥🔥
Mr s.craft blendz. Can you make us a video on how to be quicker? Bro I’ve been cutting for years. & I still take about an hour each cut. 😂🤦🏻♂️ I fade down. But it is wut it is 🤷🏻♂️ help your boy out. 🙏🏼ty
I think his name is ChooCutz uses the 2 guard system the best. Sets the open no guard and then goes right into the 1-1/2 closed mod and open and then uses the half guard to blend out
Might make things a bit easier if you start with the 1.5 and get down to second click and zero. Me personally I find it faster when I fade from top down.
Nah this was fire!! Really cool to see your thought process and trying to attack the cut in a different way when it came to the back. Cut came out fire🔥🔥
I understand the system with a wahl clipper, but if the Jrl opens to a 1(3.5mm) then why use the half guard. It would be completely unnecessary to because only the last 2 clicks would take you past blade open guard. Same thing for the 1 guard, it should take you straight to the 2 guard.
@@s.craftblendz ah man really, I gotta try this out then. I’m a barber student and I have been cutting based on that info but if this will be a better way to use the clipper I gotta try it
With clippers that open more you dont need a .5 guard or 1.5 guard tbh but you would have to know how to do other techniques to blend it in properly. Like freehanding, a lot of flicking, raking, feathering methods. Not saying its hard it just takes a lot of practice to do it consistently without messing up etc. I either use this method tbh or i use the 1 guard and 2 guard only in my cuts it just depends on what cut im doing. If im doing a stretch fade like shannon mentioned in the video I really enjoy using the 0guard and 1.5 guard method because of how easy it is to spread the blend out to whatever you want while still leaving it dark where you want it to be. If its a tighter blend i like using the 1guard and 2 guard only. It makes the blend easy to keep the blend as dark as i want and i control where exactly i want the light parts to be in and you can still spread the blend out where need be at the same time.
These systems aren't new. I'm a 30 year vet, the state where I attained my license, your not even allowed to use guards on the exam, nor in schools, til' this day. At age 12, I learned with a clipper with no lever, a balding clipper as it's known today, a razor, and a comb. Guards are almost cheating, though they are dummy proof, and increase a bit of efficiency, if used properly. Clean fade though.
I've been setting my bald line on the second notch for a few years now. I didn't realize others were doing this as well. I use the guard system as well. But I use the corded masters to tie it in with the gamma zero
Best content channel on barbering imo! Been watching you big dog for years now. Watched for years as Someone that cut hair on the side. Now I watch as a licensed barber with my own shop. Thank you for always giving nuggets and game away for free. Not just pertaining to this industry but faith as well. 🙏🏽✝️👊🏽
Thank you so much bro! 🙏 definitely appreciate that!
S.Craft content makes me want to get my favorite comfort food and just kick back and watch him be great. DOPE CONTENT FA SHO!
Thank you 🙏 😁
I'd say it's a good technique fading into shorter length, obviously longer length with only those two guards would end up with Clipper over comb and some shear work detailing in the end. I'll give it a shot. Good job man always 🙏🏼🏁💈
I think the technique is perfect. Especially for those of us that hate reaching for several guards. Excellent work!!!
I've also seen Nevin the Barber used the two guard system
I use this technique personally i prefer doing this technique with an actual 0 guard not a wahl .5. You can do it with both but the wahl half guard cuts much closer than a typical 0 guard does. Which means open all the way takes more effort to blend into the 1.5.
I love the technique personally it saves so much time. I do prefer doing fading up from the skin to the blade open but then fading down with the 1.5 open to the 0 closed. To me its more efficient than using the 0 guard first then the 1.5 because its hard to blend it like that you almost always end up having to grab the 0 guard again which at that point you should probably just grab the 1 guard if you have to grab the 0 again.
If you do prefer using the .5 guard from wahl you can blend it into the 1.5 closed by scooping out without touching the head and free hand it into the 1.5 because it cuts too close if you dont. Saves a lot of corner blending work too. You can also scoop while using the heel of the blade and that works also
2 blade fiasco😂 that’s dope!
What do you think the throw is on them? Fully opened? A half? A 1?
What guards are you working with? I heard the Wahl premium's rattle on them have you noticed that?
Great job!!! Squeak is a great barber I've followed him for years..I remember he use to use the 1&2 guard technique before he switched to this one both are amazing techniques that gives great results..
What’s the 1&2 guard technique dude?
@@kyewhittle9418 using this same technique but only using the #1 and #2 guard
If works best with the stylecraft dub zero guard and wahl 1 1/2 guard. It Instantly removes the line
Dope! I’ll have to try that out
@@s.craftblendz I’m still waiting for the jrl trimmer video lol but loving the content bro
I use the stylecraft 0, jrl
.5 or the andis 0 works best with this technique. depending on the 1.5 guard you use you may have to flick more to blend the line in. It just depends. I use stylecraft dubs 0 guard and the 1.5 because i like how flush the 1.5 guard cuts compared to others it just speeds up the process way faster. Once you get used to how much you need to flick or freehand to get the line out its easy and probably the fastest 2 guard technique out there. Same with the andis guards the 0 and the 1.5 blend in the same way
I use a #1 and #2 for my blends to happen. You did a great job brotha. Clean result!
Couldn't even tell this was an iPhone until you said something. Must be the latest one cause the video is of superb quality. Great cut!
What’s the name of the airbrush machine you’re using for the hairline enhancement?
Which sony camera did you buy ?
I also only use 2 guards, but I use the wahl 1/2 and number 1.
Anything above that I’ll use clipper over comb
The Jrl half guard and 1.5 guard work really well for this
I learned this system from a Brazilian Barber and my fades have been a lot more blurrier and smoother. And it’s cut my time I’m down. At first I struggled to get used not using the 1 guard. But overall great system
Yup that system is what Ive been using for years. Super quick and takes all the guess work out of deciding which guards you need to use. Any hair longer than the 1 1/2 I just use scissor over comb. I do the steps a little differently but still it’s the most efficient system for speed and consistency in my opinion. Nice cut!
Yessur!! Can’t remember when I figured it out but I was like “there’s gotta be a more efficient way”. Took a min to get used to but it works. JRL Onyx go crazy too
What enhance mix you used
Fire cut question what u have your I phone on chest mount or tri pod ?
Monopod
Thank you 🙏
Which one would you recommend JRL onyx or lopro FX One clippers? I have been using my Seniors cordless since they released.
Wow that cut was amazing. Truly talented and have perfected your craft. The S.Craft name suits you well good sir. Many blessings and much more success for you in the future.
Choochcutz 2 guard system is really dope too.
I have the problem with the iPhone. What’s a good camera I can buy that’s not too crazy on price but a good beginner camera that’ll be good for IG?
Love it 🙏🏽 since your talking about systems , what’s your FAVORITE system to fade !?
It looked like the technique was taking you through it but the execution is on point. It looks very good!
It was definitely a lil challenging lol
this system works crazy good with a clipper that has a stretch kit 🔥
Why aren't you using the JRL Onyx trimmers? Are they not so good?
Honestly didn't have a problem with the camera quality,its pretty good in my opinion
Love it bro! Can always connect with the transparency u display I’m a have to give it a try. Sometime I fade from zero into 1 1/2 but never thought of attacking it in this order 🔥🔥🔥🔥
The video quality is on point for real tho....
bro what you use for that color balance for your video … the color grade is sick smooth and dark I love it
This camera quality is good for a phone tbh
only thing I would recommend is using the jrl "0" or "1/2" guard. everything else has issues lifting the hair off the head. JRL half guard for me is the best half guard directly behind the OG andis purple 0 guard
What about the stylecraft/gamma 0 guard
You need to try the #2 on top and Work with only Half opened to blend it nicely , only 3 steps
Are you using the 1,5 guard from Babyliss ?
No. Klipaz guards
You made a commitment and you stuck to it, camera or no camera. Respect 🫡
Thank you brotha 🙏
Bro can I have some pointers on how to do a line up I just started n it becomes trickier with every customer. I've tried pulling the skin just to make sure I don't pull the hairline back, I've tried the machine, trimmers ever the throat razor the line up is not bad but I know I can do better
Quality is actually really good lol
Thank you 🙏
Will this work for clippers that open up to a 1 fully open or .5 fully open aswell
Yes sir
I don’t have an issue with the camera quality. I say let them keep that camera and you use the money on something else. Not counting your money, but put it to use elsewhere or even on yourself! Keep it going and thanks for sharing something new and highlighting others!!!
It came out looking blurry 💈🔥
Do you have a preset you use for your color grading? Been trying to step my editing game up
Kinda. I’ve been thinking about doing a video on that.
Loving the content keep it up Shanon
Thank you 🙏
This cut was 🔥🔥🔥🔥
Love this system in theory. The 0 guard open essentially becomes your 1 closed, and your 1.5 closed becomes your 1 open. You only really miss the few clicks inbetween with the 1 guard, but can adapt by using the corners.
The second click on the onyx is 1.4mm pretty much equal to 1/2
Can you try no guard next?
What brand 0 guard was used
In addition, I’d like to know Shannon’s thoughts on all the different guards. I know Wahl premium seem to be the standard, but seems more people are starting to use Gamma or Babyliss guards these days.
These are actually the new KLIPAZ guards just because they are magnetic so I can put them on my apron.
I prefer wahl guards and babyliss half guard
What iPhone ??
Great content as always 🔥🔥 I love trying new techniques, it keeps the feeling of being too repetitive away. It also challenges your skill!
Killed it G 💪🏼
I hear a lot of creators are moving away from the DSLR video format to using their phones. Phones do a pretty decent job when provided with good lighting. It gives it that sharp focus foreground while retaining that “boca” blur people like to associate with film/movie quality. Would love to see more iPhone videos if it means less work for you and more content brother. The quality comes from you teaching us the craft, the quantity is where we benefit. Nothing like them reps. God bless you and your fam hermano!
What if you use the streched lever, it gives you more space
I’m pretty sure JRL opens to a full 1 blade like masters
I’m pretty sure JRL opens to a full 1 blade like masters
@@s.craftblendzI don't think it does due to it coming with their fade blade. We need a caliper to measure it
It just makes it easier to blend it in but you still have to scoop with the .5 guard or it wont blend into the 1.5 like you want it to
You can't put a stretch lever on the JRL, the bracket will not physically move past the groove/indent on the clipper body. JRL standard taper blade does open up A LOT (the lever in the middle with their taper blade is a TINY bit shorter than a Wahl lever fully open), but their fade blade fully lever open is similar to a Wahl lever open. I've tested out the measurements myself. Wahl fully open is 1.3mm, JRL taper blade lever midway is around 1.2mm, and JRL fully open with their fade blade is around 1.2mm.
These numbers don't mean much, but people often think their lever opens up a lot more than a standard clipper, when on actual fact it's their taper blade is that which gives it the bigger open length, not the lever per se. You can put that blade on a Wahl and it'll open up the same
My boy Squeaks system is 🔥🙌 learned it from him & saves me a lot of time!
Cuts 🔥🔥 bro keep killing it my guy!!
Yo S.Craft, You know you could record a movie with your iPhone right? Like record in cinema mode. Imagine what you could do with your iPhone. Just play with the settings on the camera until you see a crisp image to record with your iPhone. Btw your content is pure🔥🔥🔥
SUPER AMAZING
Looks beasty
Great content… I’m having trouble putting my onyx down bro…💪🏻💪🏻💈💈
Thank you 🙏 They’re 🔥
Mr s.craft blendz. Can you make us a video on how to be quicker? Bro I’ve been cutting for years. & I still take about an hour each cut. 😂🤦🏻♂️ I fade down. But it is wut it is 🤷🏻♂️ help your boy out. 🙏🏼ty
Yes I can👍🏻
Also can’t wait for the onyx trimmer review yo!!
I don’t use this exact system , but I also don’t use a #1 guard
I think his name is ChooCutz uses the 2 guard system the best. Sets the open no guard and then goes right into the 1-1/2 closed mod and open and then uses the half guard to blend out
Nice haircut with only 2 guards!
Welcome back!🔥🔥🔥
You bodied this cut 🔥🔥🔥🔥🔥🔥
That dude looks familiar 🤔 lol
Thank you 🙏 😁
I’m thinking it’s the same steps similar to how you use the 1
Might make things a bit easier if you start with the 1.5 and get down to second click and zero. Me personally I find it faster when I fade from top down.
Deadly 🎉
Damn!!! Shit was clean
Nah this was fire!! Really cool to see your thought process and trying to attack the cut in a different way when it came to the back. Cut came out fire🔥🔥
Thank you 🙏 I appreciate that
My guy with the continuous sauce
Thank you bro 🙏
This is my first system I'm still learning
Dope! A lil challenging
@@s.craftblendz you gotta watch Nevin The Barber version of this technique
Very Nice
Thank you 🙏
🔥🔥
🔥
🙏
I would have just finished with the one guard...
2 clicks open is where it’s at
I understand the system with a wahl clipper, but if the Jrl opens to a 1(3.5mm) then why use the half guard. It would be completely unnecessary to because only the last 2 clicks would take you past blade open guard. Same thing for the 1 guard, it should take you straight to the 2 guard.
Sounds good but doesn’t cut that way 🤷🏼♂️
@@s.craftblendz ah man really, I gotta try this out then. I’m a barber student and I have been cutting based on that info but if this will be a better way to use the clipper I gotta try it
With clippers that open more you dont need a .5 guard or 1.5 guard tbh but you would have to know how to do other techniques to blend it in properly. Like freehanding, a lot of flicking, raking, feathering methods. Not saying its hard it just takes a lot of practice to do it consistently without messing up etc. I either use this method tbh or i use the 1 guard and 2 guard only in my cuts it just depends on what cut im doing.
If im doing a stretch fade like shannon mentioned in the video I really enjoy using the 0guard and 1.5 guard method because of how easy it is to spread the blend out to whatever you want while still leaving it dark where you want it to be. If its a tighter blend i like using the 1guard and 2 guard only. It makes the blend easy to keep the blend as dark as i want and i control where exactly i want the light parts to be in and you can still spread the blend out where need be at the same time.
@@Mike-hy8cs yes definitely gotta keep working at that and that is a reason for why I have always kept the taper blade on my JRL.
Sharp cut tha 🇬🇧
Thank you 🙏
Great technique. I’ve been watching Nevin the barber for the last few months and he breaks down the 2 guard method. Check him out!
Hey you found out how I fade, lol !
💪💪💪
All the semm amigo is all about time new system yes but is all time invest in result you istill hast get to the fade nothing wrong to invest gracias
🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥
❤️❤️🇨🇲
That system seems like too much work
I been fading like this for about 2 months now lol much faster
Easier with 1
Blury
Thank you 🙏
These are still too many steps
These systems aren't new. I'm a 30 year vet, the state where I attained my license, your not even allowed to use guards on the exam, nor in schools, til' this day. At age 12, I learned with a clipper with no lever, a balding clipper as it's known today, a razor, and a comb. Guards are almost cheating, though they are dummy proof, and increase a bit of efficiency, if used properly. Clean fade though.
Too time consuming.
Can't seem to find his account
Huh. I’ll go double check
I've been setting my bald line on the second notch for a few years now. I didn't realize others were doing this as well. I use the guard system as well.
But I use the corded masters to tie it in with the gamma zero
I use the 2* guard system
Best Berber