Triton Small Injection Quantity Relearn
ฝัง
- เผยแพร่เมื่อ 19 ม.ค. 2021
- Have you ever heard of an Injector Small Quantity Relearn? This is a service item that should be done on a regular basis, according to the manufacturers’ requirements.
Disclaimer:
MiracleMAX wants you to be safe, however, no guarantee can be given against improper use or unauthorised modifications on the information provided. The repair shown in this video is carried out at your own risk and any property damage or injury is your own responsibility. Please ensure you carry out this repair safely using approved safe work practices, correct use of recommended tools and equipment. This video is educational only and is no guarantee of a result if done incorrectly. Any injury, damage or loss due to incorrect use of tools, information or equipment is the sole responsibility of the person carrying out the repair and not MiracleMAX.
#injectors#relearn#smallquantityrelearn
vdocuments.mx/reader/full/mit...
Hello I have a double cab mitsubishi L200 2012 model in Greece, and when at low speeds and downhill it goes often into safe mode( 3rd gear D3 and wont change, so I need to switch off to clear it). What can it be?
Love watching your videos. What scan tool do you recommend for the average back yard mechanic. I want to do this exact job along with fuel line leak check etc. Dealers charge an arm and leg for intake/egr clean.
Max i just read the denso manual again & it does tell you, you just wait until it displays the no:2 code which means it was successful, which it did
Cheers mate, this will help me twice. I have a MN Triton and a NS Pajero 🤙
Excvellent work
I have all the temputures right but still not letting me start ny relearn ahhh. Maybe because i have egr light keep coming on even after i clear it?
Hi Max when you do a supply pump correction learning procedure how long do need to leave motor idling after initializing. It doesn't tell you in the denso documentation.
I had my intake manifold and EGR ultrasonic cleaned in December 2020. Would I need a SQR? I get the same issue of a delayed start in the morning or when the engine is cold. Cranks over 6 times before it’s starts with lots of white smoke coming out the back. The priming pump on the filter is usually soft in the morning which makes me think that air is leaking into the system somewhere. Help please.
Mercedes Benz E class 2021, I replaced my injector and Check Engine light still ON, should I programming by new code number? Or no need? What I need to let Check Engine light off?
most modern cars now have relearn on all sensors and engine management systems. well done good content
Well done buddy, key part to the job 👌👍
Well explained thanks!
Thanks
Miracle Max, does this interfere with the settings of my triton that I’ve had chipped and tuned.
Hi Max, great video mate. I've just had a major rebuild on a seized 4D56, ouch! and have had a service done after the first one thousand k's. The engine is surging a bit when accelerating since that service. Could this be down to the need for the SIQR? Also, how much should it cost to get the SIQR done? Cheers mate.
Hi Max, love your videos. Do you know of any scan tool that can do SQL, Service interval Reset and Engine oil reset on a 4N15 engine other than Gscan? And how much do the Gscan cost you? Thanks.
hi max.. I have a opel corsa d 1.7 diesel with Isuzu motor.. I replace the injectors, I make the code in injectors with new codes, but after I start the engine I have a permanent faulse code p1602-4b that's says (small quantities learning not have done.. and I go next to do this, and when I done this learning, the ecu can done.. any idea?? and of course I have and check engine light
Is it working on manual type and sumiate p position
Hi Max, Good videos, regarding the Scan tool you use (G-Scan is it),for the Tritons Small Injection Quantity Relearn, do you have to buy software upgardes subscription to keep the tablet software going, or will it still work without payment upgrade subscription?
What software do we need to do this learning?