Set up throttle limit on EdgeTX / OpenTX (for 4S configuration of HEEWING Ranger T-1)

In this video I am showing how to limit the throttle output in EdgeTX / OpenTX.
Part 2 is here: • Follow-up video thrott...
This particularly aplies to the anyone who is flying the Heewing Ranger T-1 because although the ESCs are rated for 2-4S, both motors and ESCs can get very hot and burn if you use 100% for prolonged periods of time.
I reccomend using a maximum throttle output of 70-75% and in this video I'm showing you how you can set that up directly in your radio.
If you would like to add some heatsinks to your ESCs, i would reccomend the following:
10pcs Aluminum Heatsink Electronic Chip Radiator Cooler w/ 3M9448A Thermal Double Sided Adhesive Tape
a.aliexpress.c...
There are several sizes available but the 20x14x6mm fits perfectly.
Just make sure that you don't create a metal-to-metal bridge / short circuit. The black thermal adhesive is non-conducive, so you don't need to worry about that, just the exposed aluminium.

[@Frolv]

Заказал радиаторы. Спасибо! Ordered radiators. Thank you!

[@786free1]

Thanks.
I tried to do this but added another input for my throttle as I wanted to be able to switch between 100% throttle as well as 70% and added a switch so I could switch between them. However when I change the weight and off set on the second throttle input page the graph does not show any change nor does the throttle change.

[@DZARO]

Could you record a quick video and show?

[@786free1]

@@DZARO how can I send u the video?

[@DZARO]

@@786free1 Just upload it to your TH-cam Channel and post the link here.

[@786free1]

@@DZARO Here's the link for the video th-cam.com/video/gmi3s5yrrBQ/w-d-xo.html

[@DZARO]

@@786free1 I see whay this is not working. The yellow box around your second section option is not moving down, meaning you have not actively selceted that mode if you will. You need to assign a switch. Let me make a quick video and show you how to do it. I'll post it as an additional response.