i just took out my spark and wanted to use it the batteries have 2 does they look like they charging but the spark charger does not light up red like yours did?
Thank you... I bought a like new spark knowing all 4 batteries are flashing the 2 green 4 times when charging. Purchased 4 new batteries but will waiting a month to get them. I have been researching repairing the others. From what I got off micro sd card in drone. It has been close to 2 years since flown. Do you think there is a chance to revive batteries? Also I have a DC power supply variable: 30V 5A adjustable. Will that work with CP2112 board.
i repair for 30 a piece, you pay shipping both ways, if they dont come back to life, you dont pay...yes 2 years, dont keep trying to charge DJI software works in reverse if you do, it will deplete the lipos till they are dead
Thank you. I appreciate the offer to fix them. You are in the states? I am in Canada. If i decide to ship them to you and get them fixed. I then pay shipping and 30 US each after to get them back. I have 4 new ones coming in 2-3 weeks.
@@CRUZROYHelicopters I have same issue with two Spark batteries. Are you still doing these types of repairs? If so, do you have email address for contact to arrange?
@@CRUZROYHelicopters Hey there, I just stumbled on your channel/video. I have 4 dead spark batteries that I cannot recover. I purchased a CP2112 Debug Board and bench power supply pushing steady 10v, but all four batteries will not allow me to read info, I get the same error on all 4 packs "Could not perform SMBus read 0x00". Do you think my CP2112 is bad or do you think all 4 are really dead? Before all this, I originally left them on charge overnight because, at that time, I thought that it was best to try first.
Hey CruzRoy! Cool video. I’m having the hibernation problem with my spark batteries. I can’t find the battery killer software. Can you provide a link or point me in the right direction please? I opened one of my batteries and was able to get 2.8 voltages across the cells, but it still won’t charge. I guess I need to reset the bus! Thanks, PS. Did you say not to leave the battery on the charger because it will drain the voltage if it is not charging?
Tons of good info and no -BS- . I Cracked open a spark battery that was dead for grins and . .. yeah no way does it "Pop right open". Most of the videos seem to have already taken it apart at least once already. Mild heat and a steel spudger barely got me in without damaging the casing and it still broke a few of the tabs. Did you happen to post your 3D printed Jig anywhere ? That would be really useful !
Thank You very much for your time and energy. Very apprecitated and very impressive work that you are doing here. Rob from Quebec City, Canada.
thank you where can i get the program?
i just took out my spark and wanted to use it the batteries have 2 does they look like they charging but the spark charger does not light up red like yours did?
I love how he says charge and apart! 😄
I would like to send in my batteries. Please let me know how to get them to you.
any chance you would share the stl for the 3d printed jig ?
Good stuff.. Can you show me how you connected the alligator clips to the htrc
i opened 4 of these and there was no glue? different type?
Thank you... I bought a like new spark knowing all 4 batteries are flashing the 2 green 4 times when charging. Purchased 4 new batteries but will waiting a month to get them. I have been researching repairing the others. From what I got off micro sd card in drone. It has been close to 2 years since flown. Do you think there is a chance to revive batteries? Also I have a DC power supply variable: 30V 5A adjustable. Will that work with CP2112 board.
i repair for 30 a piece, you pay shipping both ways, if they dont come back to life, you dont pay...yes 2 years, dont keep trying to charge DJI software works in reverse if you do, it will deplete the lipos till they are dead
Thank you. I appreciate the offer to fix them. You are in the states? I am in Canada. If i decide to ship them to you and get them fixed. I then pay shipping and 30 US each after to get them back. I have 4 new ones coming in 2-3 weeks.
@@CRUZROYHelicopters hey i have two that need fixed how can i get them to you?
@@CRUZROYHelicopters I have same issue with two Spark batteries. Are you still doing these types of repairs? If so, do you have email address for contact to arrange?
@@CRUZROYHelicopters Hey there, I just stumbled on your channel/video. I have 4 dead spark batteries that I cannot recover. I purchased a CP2112 Debug Board and bench power supply pushing steady 10v, but all four batteries will not allow me to read info, I get the same error on all 4 packs "Could not perform SMBus read 0x00". Do you think my CP2112 is bad or do you think all 4 are really dead? Before all this, I originally left them on charge overnight because, at that time, I thought that it was best to try first.
I have this issue how or from who do i get them fixed
What is the replacement battery inside?
Hey CruzRoy! Cool video. I’m having the hibernation problem with my spark batteries. I can’t find the battery killer software. Can you provide a link or point me in the right direction please? I opened one of my batteries and was able to get 2.8 voltages across the cells, but it still won’t charge. I guess I need to reset the bus! Thanks, PS. Did you say not to leave the battery on the charger because it will drain the voltage if it is not charging?
drive.google.com/file/d/1F-hjFhaPGixog1-4q2XkKmVmcSnppLZo/view?pli=1
What is your charge (cost) to repair DJI Spark batteries ? How do I contact you ?
How to repair battery bloated for dji spark?
You don’t. Bloated battery is a bad battery.
Tons of good info and no -BS- . I Cracked open a spark battery that was dead for grins and . .. yeah no way does it "Pop right open". Most of the videos seem to have already taken it apart at least once already. Mild heat and a steel spudger barely got me in without damaging the casing and it still broke a few of the tabs. Did you happen to post your 3D printed Jig anywhere ? That would be really useful !
yes i made jig, pro it works to charge dead batteries a cell at a time to at least 3.0 v ...con leaves holes and you still have to reset BMS
CruzRoy - Immitated, but never duplicated.
Too complicated, effort and time are appreciated but it's to technical for a regular hobbiest
do you have a email i can contact you for repair