this is my first video tutorial. You made it sounds like a simulation game and I really enjoyed and learned from this. All I want to say is Thank you very much.
Went to your channel with a hunger for more tutorial videos and was a bit gutted not to find any. However, I'd like to say thank you and I'm grateful, your sole video was awesome as well as informative. 👌
Hi. I have found this tutorial very useful. An understanding of how to connect lighting and socket outlet fixtures is fundamental in using Revit for Electrical work. It is the best explanation I have encountered so far.
I watch Balkan Arcs video on Electrical mep right before watching this one here. It's almost like this guy paraphrased Balkans video from start to finish in chronological order. The script isn't identical but the tips, order of steps, little off-shoots to cover a somewhat relevant tools real quick, etc. It's all the same as Balkans video which was made 2 years before this one. Anyone else notice that?
Hi Tech Service, This could be caused by a few things, Is this when you try and place the fixture into the space? As you may need to change the placement of the fixture as seen at 11:00 or you might just want to check that the height of the fixture is the height of the surface you want to place it on? Thanks, Mitchell
Anyone can you suggest to me the best laptop Which Can Run, Revit 2021, Navisworks Manage, And other MEP Design Softwares Without Any Hang Problem, There is No Price Boundation.
Hi! i would suggest a laptop with 16gb RAM minimum, preferably 32gb RAM if you would like to multitask running multiple software. Something like the DELL mobile workstations
Thank you for the tutorial, much appreciated! However, I am a beginner so I will like to have the electrical Revit set up for practice. Please can anyone be of help? Thank you.
There are tons of learning sites out there to learn Revit. But there is not a single large scale real-world project MEP which has been shown from scratch to commission. This is like just typical bookish Indian school.
I see this has been helpful for everyone else but I do not have the file you have inserted. Will not be able to use this tutorial. Sorry, not instructive for me.
Man, why do you have only one video?
Your explanation is amazing,keep going mate.
this is my first video tutorial. You made it sounds like a simulation game and I really enjoyed and learned from this. All I want to say is Thank you very much.
Went to your channel with a hunger for more tutorial videos and was a bit gutted not to find any. However, I'd like to say thank you and I'm grateful, your sole video was awesome as well as informative. 👌
Hi. I have found this tutorial very useful. An understanding of how to connect lighting and socket outlet fixtures is fundamental in using Revit for Electrical work. It is the best explanation I have encountered so far.
Thanks bro, its very clear and concise. Hope you can post new videos soon! take care.
WONDERFUL VIDEO. yOU WERE THE UNIQUE PERSON TO SHOW HOW GENERATE THE WIRING PATH CORRECTLY, THANKS THANKS THANLS
Pretty good video mate. Wish you had done more. Keeping my fingers crossed.
Lovely voice, hope you dont drop the ball halfway, your labor is not in vain. thank you
very useful and create new videos related to revit electrical
Good tutorial & nicely described. Thanks. I wd be happy to work with such a team.
I really enjoyed it ❤.... Please make more videos
WHAT A HELPFULL TUTORIAL!!!!!!!!!!!THANKS SO MUCH MAN...MUCH APPRECIATED
Amazing Tutorial. Please do more.
Very thoroughly explained. Like it very much
I Thanks sir, my question is How to control DB on circuit, ex. Three phase single phase suplay.
So cool and helpful tutorial, thanks a lot.
I watch Balkan Arcs video on Electrical mep right before watching this one here. It's almost like this guy paraphrased Balkans video from start to finish in chronological order. The script isn't identical but the tips, order of steps, little off-shoots to cover a somewhat relevant tools real quick, etc. It's all the same as Balkans video which was made 2 years before this one.
Anyone else notice that?
Very nice presentation brother❤
your videos was good and informative. you should make more informative videos.
U created great video...very helpful...thank u so much
Great tutorial can you add a containment tutorial?
Many thanks.
Well done Scott. Please give us more electrical, change ckt no. no easy way? remove ckt and re add?
I wanna full electrical design video its humble req.
Nice and well explanatory tutorial. pls can you share the file used for easy practicing.. Thanks
How do i place the socket outlet at a defined distance from the left hand wall e.g. 1000mm?
Thank you so much sir!
Can you share your architectural project that we can use as a base project for our electrical project to follow your lesson please.
Can you please attach your Architect model?
Perfect but PLEASE give us more.
Can you attach the files ued in this video in the description
Thank you Sir
When I do lighting fixtures then coming error. What should I do.
Hi Tech Service, This could be caused by a few things, Is this when you try and place the fixture into the space? As you may need to change the placement of the fixture as seen at 11:00 or you might just want to check that the height of the fixture is the height of the surface you want to place it on? Thanks, Mitchell
Can i get the revit file
Hi how do you add revit electrical and lighting plans into in the architectural model ?
guys, how do i show annotation on my plan instead of showing the family legend
Anyone can you suggest to me the best laptop Which Can Run, Revit 2021, Navisworks Manage, And other MEP Design Softwares Without Any Hang Problem, There is No Price Boundation.
Hi! i would suggest a laptop with 16gb RAM minimum, preferably 32gb RAM if you would like to multitask running multiple software. Something like the DELL mobile workstations
thx
After linking my revit file, I cant click anything, the revit that I linked is just like a background, what should I do sir?
Thank you for the tutorial, much appreciated! However, I am a beginner so I will like to have the electrical Revit set up for practice.
Please can anyone be of help?
Thank you.
did you resolve your issue?
Where is your architect model?
How could I have the file you are working as a practice file?
Thanks
There are tons of learning sites out there to learn Revit. But there is not a single large scale real-world project MEP which has been shown from scratch to commission. This is like just typical bookish Indian school.
How do I add the circuit labeling on the drawing it self?
I guess you could add an "etiquette" i don't know how it's called in english. Then you generate a new dwg from revit with the circuit labeling done.
I see this has been helpful for everyone else but I do not have the file you have inserted. Will not be able to use this tutorial. Sorry, not instructive for me.