Hello, could you please tell me if you know of course... The bottom Filter of the midea all easy pro, there are 3 different pieces of cleaning the air i think. The technicians didn't put them at installation, and i don't really know how to put them right. Also i can't find a distraction. Thanks a lot!!!
@@Lore_tta sorry I am not familiar with that model, don’t believe it sold here in Australia. Have you tried the Midea website or contacting them directly?
There is no information on the indicator light flashing - - after turning the unit on. After turning the unit on it just turns off but flashes - - i checked the owners manual but there is no information on that error code. Is there any way to get more information on that?
@FullyAirconditioned ks09-28 series with a remote. I'm not sure the specific model type. Thanks for the reply. I want to say it's the compressor is locked up, maybe from lack of refrigerant as I hear a noise similar to a locked up fan when cool Is engaged. Every other setting works. However, all I see is - - flashing on the front face and no other error code.
You need to know the brand, then look up the technical manual or service manual. When the light is flashing on the front it’s letting you it’s detect a fault. The light will flash a number of times then pause, this number should correspond to a fault in the services manual / installation manual.
@FullyAirconditioned I looked at the service manual and I am a handyman/it guy previously..I know how to look for codes but there are none associated with - - on the screen. I like the product but tomorrow I'll get the model #. I like your fast response given the time difference from America to Australia . I'll have more info in the day. Thank you again. I tried the 1800 # but we have 4 digits in the last 4 vs 3 like you down under 🤣. Service provider didn't understand 🤣
@FullyAirconditioned your service manual covers everything except - - om the screen which makes me think it's low refrigerant/locked up compressor motor
Take a flashlight and show me how dirty it is on the fan wheel.. I had one of those models show us how to take it apart and clean the inside. Not so easy. I’d rather have a window unit.
Check out my other videos, it show how the system comes apart to be cleaned and removal of the fan barrel. Window units have not been sold in Australia for a long time (nothing bigger that 9000btu) as they don’t meet the MEPS (minimum energy efficiency standards) the US lags behind big time in efficiency and what can be sold. You can still purchase large capacity window units, especially if they are manufactured in the US.
It's wrong to call them filters Its a plastic mesh. Is there anything that could be added that actually filters the air? Purifier have much much better filtration
The filters are there to protect the system from getting blocked up with dust, cleaning the air is not the purpose. Correct cleaning the air is best done with an air purifier.
Thank u so much my air was barely cooling and once i cleaned filter was like a brand new Ac !
Great video, short, simple and clear as day!
Thanks
Thanks. Short, clear and easy to follow.
Thanks for the video ! Very helpful it’s currently 50 c in Saudi and I was in crisis 😅😅
Thank you for this helpful video!
Hello, could you please tell me if you know of course...
The bottom Filter of the midea all easy pro, there are 3 different pieces of cleaning the air i think. The technicians didn't put them at installation, and i don't really know how to put them right. Also i can't find a distraction.
Thanks a lot!!!
@@Lore_tta sorry I am not familiar with that model, don’t believe it sold here in Australia. Have you tried the Midea website or contacting them directly?
Ultimax carrier
Do you know where the filter is
Top or front?
@@shoushajr1716 sorry, not sure that that model/brand
Thank you vary much
Sooooo helpful
There is no information on the indicator light flashing - - after turning the unit on. After turning the unit on it just turns off but flashes - - i checked the owners manual but there is no information on that error code. Is there any way to get more information on that?
What brand and model unit is it?
@FullyAirconditioned ks09-28 series with a remote. I'm not sure the specific model type. Thanks for the reply. I want to say it's the compressor is locked up, maybe from lack of refrigerant as I hear a noise similar to a locked up fan when cool Is engaged. Every other setting works. However, all I see is - - flashing on the front face and no other error code.
You need to know the brand, then look up the technical manual or service manual. When the light is flashing on the front it’s letting you it’s detect a fault. The light will flash a number of times then pause, this number should correspond to a fault in the services manual / installation manual.
@FullyAirconditioned I looked at the service manual and I am a handyman/it guy previously..I know how to look for codes but there are none associated with - - on the screen. I like the product but tomorrow I'll get the model #. I like your fast response given the time difference from America to Australia
. I'll have more info in the day. Thank you again. I tried the 1800 # but we have 4 digits in the last 4 vs 3 like you down under 🤣. Service provider didn't understand 🤣
@FullyAirconditioned your service manual covers everything except - - om the screen which makes me think it's low refrigerant/locked up compressor motor
Take a flashlight and show me how dirty it is on the fan wheel.. I had one of those models show us how to take it apart and clean the inside. Not so easy. I’d rather have a window unit.
Check out my other videos, it show how the system comes apart to be cleaned and removal of the fan barrel. Window units have not been sold in Australia for a long time (nothing bigger that 9000btu) as they don’t meet the MEPS (minimum energy efficiency standards) the US lags behind big time in efficiency and what can be sold. You can still purchase large capacity window units, especially if they are manufactured in the US.
It's wrong to call them filters
Its a plastic mesh.
Is there anything that could be added that actually filters the air?
Purifier have much much better filtration
The filters are there to protect the system from getting blocked up with dust, cleaning the air is not the purpose. Correct cleaning the air is best done with an air purifier.