How To Setup The GAN 356 M LITE.
ฝัง
- เผยแพร่เมื่อ 30 ก.ย. 2024
- this is how i setup my new main the GAN 356 m lite. very good cube and if you want to get it i would recommend getting cosmos and weight 5 or 6 lube to set it up and i only used weight 6 which works really well. i recommend these lubes because weight 6 can make cubes very fast if you know where to apply it and very slow. but sometimes you might want your cube to feel slower, in this case you should get cosmos which makes it slower.
Song used: Better Days- • LAKEY INSPIRED - Bette...
beginner 2x2: • how to solve the 2x2 r...
beginner 3x3: • How to solve the Rubik...
beginner 4x4: • How To Solve The 4x4 R...
beginner 5x5: • How to Solve The 5x5 r...
beginner 6x6: • How To Solve The 6x6 r...
beginner 7x7: • How to Solve the 7x7 F...
3x3 setup tutorial: • How to setup your spee...
4x4 setup tutorial: • How to make your 4x4 A...
5x5 setup tutorial: • How to setup your 5x5.
working on a 6x6 setup tutorial please like and sub for that :)
7x7 setup tutorial: • How to Setup Your MGC ...
please like and sub :)
![The Gan 14 Maglev Is [insert]](/img/n.gif)
guys, what’s the best nut for this cube? green, purple, yellow or blue? these are the ones I have
Prob the tighter ones, this cube is too fast.
My corner on this cube is wobbly. Does someone have a solution for that.
Not sure
I don't have lube
Sad moment
356 m or 356 litr??
M. The extra stuff is worth it in my opinion:)
Is it required to oil a new gan 356M lite just out of box?
cuz I used cheaper cubes before and now bought gan cube and I wanna take good care of it.
So i got this cube and its default it .6 is that the most tense or is .8 more tense?
.6 is tighter :)
@@leeleecuber ok thanks but can it go any tighter than .6 because there is like a block image and i dont know what it means
Can you use lubicle silk for the slow lube?
Of course
nice vid, i can now use this to set mine up as well
thank u
I take my pieces out too often so now the lube is running out, lol
Lol :)
Does it matter if you set your core to 0.8 or 0.6? And which one is faster and which one is slower?
0.8 is faster. However, it’s already too fast on 0.6 so I don’t recommend putting it on .8
Thxs so much
I just got a Gan m lite
@@Birbooo np :D
Tbh its more to how to lube it rather setting it up since you cant set up anything beside lube
Oh and btw do i need to lube it since im quite new to the cubing community
yea i agree with you. this cube is very limited and thats why i switched to a different cube. i am curently useing the rs3m 2020 and its probably the best cube i have. for you tho because your new this cube will be just fine to learn new finger tricks. just turn lightly and youll be fine. also if you should get lube? yes, i recommend lunar from speedcubeshop or comet which i have. please like and sub i am really trying to get to 200 :) hope that helps.
Him:I’m scared to put water on a gan cube
Me: uhhhhhhhhhhhhhhh opsies
LOL
Yo Leelee what lube do u use to lube your 356m Lite since idk what lube to use
Watch the vid lol
Hey man, should I use gan magic lube on the ges and on the core and the standard on the pieces?. I only have the gan lubes.
Yes that would be perfect:)
What GES nuts do the lite come with?
they come with the blues now pls smash like and sub to my rubiks cube channel LOL
Please do not reassemble your cube like he did. There is a chance it will unsolvable. I recommend reassembling it solved
what u r saying makes sense but i personally like to just do that and if its unsolvable then i just fix it, i find it very slow assembling solved. in general i think the way i did it was the fastest however i would not recommend this for beginners
@@leeleecuber yeah that makes complete sense, some people however won’t realize it so I was just pointing it out
@@melvin4484 :)
Which lube u used i had only gan lube magic
um maybe just use that on the pieces but just make sure to use it on the closer to external parts of your cube and I'm sure it will be good :)
@@leeleecuber oh Ok my sub is 50 what i should improve i just do basic and some f2l by my self not in cfop but there too much enough idk how to started a nnew
@@phongstreetworkout4426 you know what? im going to make a video just for u :)
@@leeleecuber Ok
I have this cube for 1 month and now it started turn worse.If i put Martian and clean the peaces,it would be better?
Yes, every time it starts getting worse or turns slow you need to clean it and reply lube. I have many tutorials on how to do this if this video isn't enough for you you can check my setups playlist. Hope that helps :D
@@leeleecuber ok i subbed:)
@@GeorgeCubes123 thx :D
@@leeleecuber dirt comes again on the same day how to stop it?
@@theindianspeedcuber5339 make sure it’s cleaned and lubed properly. If it is then it should be good :)
Hi
hi also be sure to smash like and sub LOL
@@leeleecuber should i buy this cube, or the valk 3 m?
@@aleontecristian9260 if your looking to but a new cube don't get a valk because there are cubes now that are cheaper then the valk and are better than it. your safest option is the rs3m 2020 and if you want that I don't think the gan is bad either but just know if you don't like very fast cubes you wont like that cube.
I slove the cube literally like you 😂
lol im sure ur great :D
@@leeleecuber not better then you 😅
@@enter2719 youll get there one day :D
@@leeleecuber I hope so
1 question can i ask how do you know what like setting the nut is cuz im a begginer and i dont understand how the blue nut thing in the core works
There is a thing pointing at the setting it’s on.
@@leeleecuber oh ok tysm
@@hadlygamingyt5208 no problem:)
@@leeleecuber last question Do you have any like lube you suggest to make my gan 356M lite faster since my gan is a bit lockey
@@hadlygamingyt5208 yea, Martian is pretty good on this cube :)
can you change the magnets?
No ;(
@@leeleecuber oh ok, I don't really know much about the cube, but what can you customise?
What editor did you use?
oh yea i use davinci resolve
@@leeleecuber okie I cant afford them lol
@@JLCubing there is a free version
@@leeleecuber I think Im fine with premiere pro. I got full ver for free
Also u used too much weight 5 on the corner for one piece. Focus more on the internal parts of pieces, those parts will be dry then 😬
Hey! Just checking, can you make a quick video on how to adjust the blue GES nut and the magnets inside the gan and tell what it does? because i’ve never had a gan cube before and i’m used to the moyu system
The lite doesn’t have any adjustments besides changing the tension which can be changed by pushing down and then twisting the blue thing :) hope that helps
@@leeleecuber Got it! Btw you are one of my favorite cubers to binge watch lol
@@mworkszn7218 lol thanks
@@leeleecuber :)
@@mworkszn7218 :)x2
Do u recommend getting this cube lubed?
No, I recommend getting lube with the cube that way you will have lube that u can use over and over again. I still have a bottle of Martian from 2019. That’s how long lube lasts