I was in the Army for 23 years. I am tentatively planning on getting into the Iron Worker Industry. This helped me out a ton. By the way, i have not touched Basic Math in 30 plus years. God bless You and God Bless America!
I got a 95% thanks for your help! I would have gotten higher, but I didn't finish the last five questions due to time restraints on the math portion....
I just finished taking the IBEW pre apprenticeship test in Minneapolis Minnesota. They switched to a new test which is the GAN Aptitude Test. There was a lot of fraction problems, mixed numbers, finding pattens in a series of numbers, and my least favorite a whole section on paper folding where holes end up after a piece of paper is folded and holes punched. Thanks for the review on fractions and math skills, the refresher helped a lot.
Question on the plywood problem at approximately the 24:43 mark; are we to assume that only full sheets can be used, because if you can cover a 24’x32’ area with 24 sheets, you would be left with a 1’x32’ gap, which could be filled with a 25th sheet ripped down to 4x equal 1’x8’ pieces(if we ignore saw kerf) requiring only 25 sheets?
@@ColfaxMath yes but the area the question ask you to cover is 25’x32’. So in the video, to cover that additional foot you added 4 more sheets and noted to discard the extra 3’x8’ as scrap. I am wondering, on an aptitude test such as this is that the correct way to interpret this problem or is it more correct to think of it in real word applications where I would only take one additional sheet (the 25th) and divide it up into fill the remaining area making the answer 25 not 28?
@@michaelhuebel9231 sorry about that last response, I didn't remember it was 25'. Twenty five sheets makes sense, with three rips, not sure if you can add that sentence on the test.
@@ColfaxMath no worries, I recognize this video is 9 months old. I am studying for the IBEW aptitude test I am scheduled to take Nov 8th; I graduated high school in 2000 and had AP calculus that year so algebra was a while ago. I have found your videos helpful refreshers. I am just trying to figure out if a similar question to this showed up on the 8th how best to interpret the question and determine the solution for the best result on my test.
Yes, plenty of variation between states and unions. Absolutely you should check in with whoever is giving the exam and what preparation materials they have.
@@ColfaxMath what do you mean? I know when I took it the first time, which I shouldn’t have done, because I just had a brain injury couple months prior . I thought I could do it in the time everyone else had, but I didn’t realize how bad it was, and how much more easily I get frustrated and confused. But I know that you can’t write on the test, you have a sheet of paper they give you to show your work, and no calculator did you mean that? Or like will they tell me what to study for, because right now I’m just doing a group of it all. And half of the stuff I study for last time wasn’t even on there, a lot of it was graphs, which I didn’t study too much and I think that’s where I got messed up.
This is nice but I don’t like how you skipped some big problems for example the fiftheen sixteenth shade in, kinda remind me of teachers only doing little problems then giving you tougher ones ya know 🙁 nice review though 💯
lowkey didnt explain anything. how would i find out how much a number goes into another number without a calculator or writing it out on paper because that takes too long?
perfectly explained, I'm practicing for a aptitude test for local 103 ibew, do you have an email you can share with me? i would like to ask you a few more questions, thank you
this video no lie helped me pass my aptitude test with an 86%
Great to hear, congratulations
@@ColfaxMath thanks !
did u get in
Heading to my exam today! helping me brush up my math. Thanks for the review :)
@@NKUSA88 good luck
Thank you Sir! I could never grasp basic maths in high school and struggled. I’m now re-learning at 30 and your videos are so helpful!
Thank you, great to hear
Same, math was so hard for me back then, still is a little bit now, but not nearly as much after I went to college
Passed my test the other day. So glad I re learned and dusted my brain off with these math problems
Great to hear
hi was it for carpentry apprentice ship
I was in the Army for 23 years. I am tentatively planning on getting into the Iron Worker Industry. This helped me out a ton. By the way, i have not touched Basic Math in 30 plus years. God bless You and God Bless America!
Good to hear
I'm brushing up for the local 28 exam.and I'm so nervous thanks this helped alot
Very glad to hear it. Good luck
This was a ton of help! I wish I had teachers like you growing up. You seem like a very patient and kind man. I will let you know if I pass...lol
Thank you, I'm sure you will, good luck!
I got a 95% thanks for your help! I would have gotten higher, but I didn't finish the last five questions due to time restraints on the math portion....
@@ryanwood74 great to hear
Love how you spent time doing this, thank you!
Great to hear, thank you
Thank you this helped refresh my brain for my apprenticeship for hvac! Test is tomorrow I'll edit and let everyone know how I did! 😀
Good luck
How you do?
Awesome tutorial and test preparations for the Aptitude test. Much appreciated.
Glad to hear it, Thank you
Thanks for this I’m taking my math test on November 6 for my local union
Good luck
I just finished taking the IBEW pre apprenticeship test in Minneapolis Minnesota. They switched to a new test which is the GAN Aptitude Test. There was a lot of fraction problems, mixed numbers, finding pattens in a series of numbers, and my least favorite a whole section on paper folding where holes end up after a piece of paper is folded and holes punched. Thanks for the review on fractions and math skills, the refresher helped a lot.
about how much algebra was on the test? taking the 110 test tomorrow.
@@bril6157 not as much as I thought. No factoring, no slope line intercept, mostly fractions.
Good to hear, thank you for the update
Thank you so much ! I take my test for Local 68 August 10th 🙌🏾
Good luck
Would it be the same test for local 104?
Hey did you pass??
Excellent
Thank you
Question on the plywood problem at approximately the 24:43 mark; are we to assume that only full sheets can be used, because if you can cover a 24’x32’ area with 24 sheets, you would be left with a 1’x32’ gap, which could be filled with a 25th sheet ripped down to 4x equal 1’x8’ pieces(if we ignore saw kerf) requiring only 25 sheets?
A sheet is 4' x 8'. Both 24 and 32 are divisible by 4 and 8, so you can lay it out either way. Both ways end up with whole sheets.
@@ColfaxMath yes but the area the question ask you to cover is 25’x32’. So in the video, to cover that additional foot you added 4 more sheets and noted to discard the extra 3’x8’ as scrap. I am wondering, on an aptitude test such as this is that the correct way to interpret this problem or is it more correct to think of it in real word applications where I would only take one additional sheet (the 25th) and divide it up into fill the remaining area making the answer 25 not 28?
@@michaelhuebel9231 sorry about that last response, I didn't remember it was 25'. Twenty five sheets makes sense, with three rips, not sure if you can add that sentence on the test.
@@ColfaxMath no worries, I recognize this video is 9 months old. I am studying for the IBEW aptitude test I am scheduled to take Nov 8th; I graduated high school in 2000 and had AP calculus that year so algebra was a while ago. I have found your videos helpful refreshers. I am just trying to figure out if a similar question to this showed up on the 8th how best to interpret the question and determine the solution for the best result on my test.
i got 25 also by getting the area of 25x32 = 800 then dividing the area of 8x4 = 32 ---> 800/32 = 25
Helped a lot. Thank you sir!
Good to hear
This gonna help me a lot. Much appreciated!
Glad to hear it
Beautiful truly appreciate this! Gotta get that TIME Table
Great to hear
Awesome, gonna help a ton on my test
Great to hear
I'm needing to study because I'm going for IBEW local 22. Thank you for making this video
Thank you
How did you do
Holy mackerel! I have a lot to relearn. 😂Thanks for your channel!!
Keep studying, it will come back
Thank you ❤️
Thank you for watching and commenting
is this also for a pipe fitter/welder application?
I'd check in with your local
I don't get it. 32 * 25 is 800 square feet. A piece of plywood is 4 * 8 equals 32 sq ft.. that's 25 pieces of plywood.
Yes
thank you very much ,will I take the test online? and can I use the calculator if I go to a place to get the test? thank you again
Not sure, some places it's online
@@ColfaxMath ok cool, can we use the calculator ?
I don't think so
Does the test also vary by state/region, part of me feels like that no matter what, although I can be absolutely wrong lol
Yes, plenty of variation between states and unions. Absolutely you should check in with whoever is giving the exam and what preparation materials they have.
@@ColfaxMath what do you mean? I know when I took it the first time, which I shouldn’t have done, because I just had a brain injury couple months prior . I thought I could do it in the time everyone else had, but I didn’t realize how bad it was, and how much more easily I get frustrated and confused. But I know that you can’t write on the test, you have a sheet of paper they give you to show your work, and no calculator did you mean that? Or like will they tell me what to study for, because right now I’m just doing a group of it all. And half of the stuff I study for last time wasn’t even on there, a lot of it was graphs, which I didn’t study too much and I think that’s where I got messed up.
Taking plumbing test this Thursday
Good luck
How did it go? Just applied to the union today what was on ur test
@@sweetmaydaniels5331 I passed. It was pretty easy. I even did the interview. Now I’m waiting what they say back
Hi. Is this the one I would take before getting into the local 5 yr apprenticeship (IBEW RI)? My test is this Thursday 🎉
You should check in with your local, they are there for you.
thank you for this, where can i find the answers to the practice test so i can check my work?
Thank you
@@ColfaxMath can I find the answers to the practice test anywhere so I can check my work?
The exam is very similar to the actual entrance exam
Good to know, thank you
Is there anything extra on the test??
Local 525 test tomorrow hope I pass
Good luck 🤞
Would you shade in 15 circles for 15/16 please I’m confused on that one someone please answer me I got a plumbers aptitude test soon please help
Hope he sees this comment
Yes I see this comment
Yes, you would shade 15 of the slices. There are a total of 16 slices and you want 15 of the 16 slices, so you shade in 15 of them. Hope that helps
@@ColfaxMath I’m now seeing this thanks a lot bro I ain’t do this typa math in a couple months lol
@@PIuggo glad to hear it
where are answers so i can check my work? thanks
Only in the video
Beautiful explanation mate🍻
Glad it helped
This is nice but I don’t like how you skipped some big problems for example the fiftheen sixteenth shade in, kinda remind me of teachers only doing little problems then giving you tougher ones ya know 🙁 nice review though 💯
OK, I'll try and be more thorough in future videos
I'm takin a basic math test for local 104 vac next week would u say I would need to no more than the basic math?
I'd check in with them and ask for a practice exam
@@ColfaxMath they stated basic 8th grade algebra
@@ColfaxMath I would assume that means the topics u covered as well as multiplying and diving decimals fractions?
it s a pre apprentice math test 45 minutes
Is there an updated link? Can’t access one in description.
www.kmltf.org/wp-content/uploads/2014/06/pre_apprentice_math_study_guide_01.pdf
I can’t get the link to work either, has anybody figured out a new link or how to get it to work? Thanks in advance
I'll work on it
Thank you !
lowkey didnt explain anything. how would i find out how much a number goes into another number without a calculator or writing it out on paper because that takes too long?
Ok
Could this also apply to plumbing aptitude test ?
Yes, they all all pretty similar
The link for the study guide isnt working for me
Sorry to hear that, I checked the link and I think you might have to have a Gmail account
@@ColfaxMath not working for me either
Did anyone get 33.3333 sq ft for the glass question
I take my local 18 test next week and let me tell you.. you brought my marbles back to life 🤣
Great to hear. good luck
local 18 in los angeles?
How did you do
👍🏼👍🏼👍🏼
Thank you
Yea this ain’t for me big bro
Sorry to hear that
Get lost you😂
Can you say Malayalam
Ok
perfectly explained, I'm practicing for a aptitude test for local 103 ibew, do you have an email you can share with me? i would like to ask you a few more questions, thank you
jonathan@topsaw.com