Recently purchased a Pedego Ridge Runner and could not possibly be happier. Did hack the software and now have top speed of 28mph. Solid components, smooth motor engagement and awesome battery life. Rode 35 miles today in pedal assist mode and had 47% battery remaining. Most importantly, bought from a great dealer in Juno Beach FL who has parts inventory and detailed knowledge of the brand.
I am looking at Pedego mainly because of local dealer support. But the price point seems way higher than most online ebikes for similar components. Love to hear his opinion on if if they are worth it or overpriced.
Converted my old bike with a 1500 watt hub motor, spent less than 500 for the conversion and it will go 30 mph (gps verified cause the speedo that it came with is way off). Great for a person like me that had knee injuries, thinking I would never bike again... This channel is what got me into it! Keep it up!
niceee been thinking and planning... a lot for a conversion (small problem is i dont have a bike to convert currently XD) but may i ask how u got a 1500w hub motor and a battery for sub 500 (i guess usd). also can i ask for a name or link for the motor and what battery u built? (cells and parallel X in_series)??
@@pasmas3217 prices are up a little bit right now, but I got the voilamart 1500 watt kit for $195.00 USD (it's now $235) on eBay. And a 48v 20ah battery (LiFePo4 so it's 16s1p, gonna replace it) from eBay for $280 USD (now going for $330). I had wire and stuff laying around to hook it up and a circuit breaker already for a fuse, but they are only a couple bucks anyways. I'm going to build either a 16s2p or 16s3p LiFePo4 battery out of 32700 liitokala cells this winter. Either be 14 ah or 21 ah depending on which way I go with it.
@@chrisnmichelle0218 very niceee (except the baterry is too small for me... in my planning i am thinkint of 16s-4p which is my main price killer... otherwise i was looking at some motors from ebay for about 180$ for 1000w, but it was just the hub, without the spokes or the wheel (which i dont want to take up as a job too...). i am gonna give a look to the motor u used, but if i can swing a sub 1000€ for the entire 1500w ebike with a 4p battery i will be very happy (consider i have to buy a bike for the conversion too...) *welp, cant find a single motor that will ship to europe (like the one u used...) my problem is i dont feel like trusting a kit from china... to pay for it 200$+ and wait over a month to receive... **anyway, how happy are u from the motor specifically? if u dont mind how heavy are u, since i am around 210pounds? (not that it should be a probblem with 1500w) and do u ride it only on throttle/pedal_assist??? thanks for the anwers mate
@@pasmas3217 I'm the same weight as you, which is why I got the motor I did. Keep in mind, all the motors are basically the same, I've had good luck recently using AliExpress. My kit came with all the accessories, but I took the PAS sensor off cause I didn't like the way it controlled the bike, I like the control myself. So I pedal and just use throttle when I need some help. I have taken to using throttle on takeoff so I don't have to change gears ever. I usually cruise around 16 to 20 mph, and lightly throttle while pedaling if I need some help, usually shows around 100 to 300 watts when I do that. About the battery, keep in mind that the cells make a difference as one of the 32700 cells is like two or three 18650 liion batteries. The specs on the battery are 7ah with continuous 30/35 amp discharge. So a 2p would be 14ah with a continuous discharge of 60 amps. 3p would be 21ah and continuous discharge of 90 amps. A 3p for the 32700 batteries would be like a 6p of the 18650 batteries. I got Micha's book, it is really helpful in the planning of the battery. And like I said, honestly, the eBay sellers are selling the same things that you can get on AliExpress, just quicker shipping time. The items most likely all come from the same factory there. I am getting all of my cells through AliExpress (Liitokala cells). Not too worried, enough ebike videos reference buying from there, even Micha on this channel.
Hate to say it, but the solution to nearly every one of these questions is DIY. I’d encourage everyone to give it a shot, I’m glad I did. I’d recommend the Bafang BBSHD for your motor. This is because it includes the controller which means all of the most difficult wiring is already done for you. Paired with a simple 52v frame mount battery and it will run you around $1k. This is the setup I used for my first build and believe it or not, it only took me 30 minutes to build! There is an abundance of assembly guides on TH-cam. Definitely a cost effective way to get an e bike. $1,000 + the potential cost of a base bike will get you 35mph, 1500W, and plenty of range!
For an affordable light and powerful e-bike the Luna Cycle folder deserves a mention. It has a 750 watt BBS02 and about 12-13 amp hour 52 volt battery, weighs about 40 lbs for around $1800.
No one ever mentions one of the most under rated brands : Nireeka. I ordered the nireeka Prime and it has a bafang ultra mid drive , carbon fiber frame, fat tires, and available front fork suspension and throttle. Starts at $2500 too. Please consider mentioning this bike. It deserves the recognition. Just go look at the promo video of the bike. It’s super sexy
@Chris H, that price is a bit more then a lot of people are willing to pay for an ebike. For an example, my mom would not even pay $1,500 for an ebike much less that of a $1,000 dollars for an ebike. That could be why no one mentions the Nireeka Prime, it could also be that it does not fit a lot of people's riding style. I have an etrike conversion that cost me just about $500 to build, and there are a lot that would not even pay that as they want one of those $199 Walmart specials.
@@GenderSkins Very understandable. It’s just.. a lot of bikes with the bafang ultra motor are very expensive. So that’s why I thought I’d mention it. But I see your point
Bafang bbshd is one of the best options for a cheap but powerful and cost effective bike, the main problem is you either need to be able to make the conversion yourself, or have a friend who can do it for you. I put the bbs02 on my cheap road bike that I’m used to and it rides like a dream. If you want to make a cheap ebike, converting an old bike with one of these kits is a great choice and allows for you to customize the bike to be what ever you want it to be. If you have an old bike lying around and a little bit of mechanical ability you can make a 1000w bike with a little bit of TH-cam and persistence. My total cost was my 3 year old bike that was 400$ ( no extra cost, I already had it), 500$ for the kit (around 10 screen and controller options on Amazon) , 280$ for the battery and about 2 hours of work to get it going. The limiter is 60 mph and the only limitation is my bike because it isn’t good enough for the kit (bike vibrates above 35 mph so I haven’t taken it above 40mph). Overall converting a old bike with bafang kits are amazing and you could get a bike that suits you without worrying about the electrics being included. (You can limit the power and speed to what ever you want it to be with the c18 controller so regulations and laws aren’t a problem)
I just got a Rize Bikes Bolt X. It's a folding step-thru frame with fat tires (3.3 inch), 750 watt motor, front suspension fork, integrated front and rear lights, big hydraulic brakes, decently large battery, and super fun for US$1699. I highly recommend this bike!
After much research we settled on a Rad Rover 5 for me; and a Rad City Step thru for my wife. We couldn't be happier with these bikes. Loved the $100 returning customer discount (two hundred if you buy two bikes within 2 weeks, and their veteran $200 discount. We can't speak to reliability yet, we've put only 350 miles on each. But we would make the same purchases again.
FYI I saw a his and hers ebike in a UK Costco. For £899 (Inc tax). You get the usual 250W motor (front hub), lights and mudguards. No disk brakes this time.
Get a kit off Amazon or AliExpress and install it on your own frame. This way you can get the power/range combo of your choice at an affordable price... and you'll learn a lot about it in the process. Worried that its "too hard" to do? It isn't that big of a challenge, actually, but I suppose it helps to be inclined toward this type of fun project. (I guess I'm biased that way 🙄😊)
Very informative - thanks! I'm in Canada and looking at the Voltbike Yukon 750 for commuting about 50km/day with an opportunity to charge the battery at my office. Is this a good option, given I'm looking at all weather commuting, including -40C with snow and ice.
In your opening bike recommendation....... Ariel Grizzly is less expensive with somewhere north of 75mile range. And it's less expensive than the E- bike dual drive bike.
Unless you are already a cyclist, your 1st ebike should be under $1500, more like under $1000. Learn about bike maintenance and what ebikes are all about. Then save for the bike of your dreams. Also, this is the best channel for ebike info. 👍
I'm not an avid cyclist but I do enjoy getting out and tinkering and I invested in the entry haibike(£1800).the bike does more than il ever need it to do.looking at getting my girlfriend a bike for around £1200-£1500.
Great videos. We have a ride1up core 5 with a spare battery which is an amazing fast bike which she drives We have a second aventon pace 350 that I drive but find it not as powerful. Looking to replace the aventon with either a 700 or LMTD ride1up. Which one do you recommend. We do mainly paved bike trails around 40 miles or so. I really like to get a workout she just pedals when I’m looking to see if she is hence the two batteries.
What are your thoughts regarding using Super Capacitors with E bikes? Potential benefits would include longer range, longer battery life and better regenerative breaking. Thanks.
I am no export but only the Frey bike seems to be of good quality. Absent from this video is an important consideration. Brand support. In your next video on this topic please include a conversation about brand support.
Great advice. You should make a playlist of these e-bike shopping tips videos so they're organized. Also so the videos are streamlined for easier view count accumulation 😉
Micah, I’m switching the original controller out of my Super73 Z1 for one that can handle PAS. I’m looking at a 48V controller, so I know it would be able to “pull” the amp. But would it also give me a little more speed or duration? Following Brian D. Howard’s videos, I’ve already hacked the speed (cutting the white wire) and I avg about 25mph, top speed 36mph. I also added a 2nd battery (36V 20ah) that now is my “main” because - you don’t know what u don’t know🤷🏾♂️ - the original Z1 battery is pretty anemic for all day biking at 36V 11.4ah. Night and day difference. Hope my question isn’t too confusing, thanks...and when I’m gon’ get my free book. I need DIY Lithium Batteries. Shalom /Bklyn👑
bro I am in India and I made a ebike under 200dollors and it has a 350w 36/48 hub motor with 36v 7.5ah battery and its awesome. I am 13 year old and I really like your channel and it would meant a lot if you mention and help me upgrade.
I'm deciding between the biktrix duo or the juiced hyperscorpion? I want a multi purpose bike light off road, errands, transportation, street. I like speed, comfort and range with a flexible $3,000 investment but less is okay if its the right bike.
I do apologize by adding a question or 2 😅 If you get a chance can you answer mine? Which bike should I convert into an ebike with a BBSHD 68mm and a 52v 20amp triangle? My budget is less than $1,000. Also can you do a review on the Rambo g3 at Costco online!! Haven't seen one review for it video wise 😂 I'm somewhat a handyman that knows how to build a bafang setup a. The bike that I had for the setup wasn't capable of sustaining so much of the torque I through at it. Would appreciate any advice. Thank you and have a blessed day.
Enjoyed your video! I believe those perfect welds you refer to are fake, it’s a type of glue baked on over top of the welds and then sanded down. Look at any high end frame 5k to 10k and the welds are tight, even and rippled, not smooth.
Hi Micah, I was curious what your thoughts were about the new tabless 4680 cell that Tesla introduced on Batter Day, in regards to E Bikes in general? Are we looking at a step change in terms of Power, Speed, and Range? Also, could the 4680 cell inspire innovations in E Motorcycles? Where do you see that industry going if 4680 cells were available?
Question. What are your thoughts on the M2s All Terrain Ultra HT. Looking for a bike to ride trails. I’m 69 years old and have been biking for 30+ years. Just looking for fun not going to go crazy.
Hey Micah, I've been looking into e-bikes and love your videos - really informative with accessible explanations of the technology. I'm really intrigued by folding e-bikes, especially the fat bike style with suspension (weight isn't a problem but size for transport and storage is). Only snag is that I also think I want a mid-drive motor. Is there such a thing as a folding, mid-drive e-bike?
Do ebike controllers have different arrangement of phase and hall sensor connection wires than the electric scooter? For example, do wires match via color codes? Do ebike motors and electric scooter motors have same phase and hall sensor wire arrangement?
A lot of these questions that you have gotten show me exactly how much people in general really know about the price of quality/safe ebikes.Not much lol
I've learned a lot from your channel keep up the great work. Here's my question, I've got a 30 mile hilly round trip commute with a 1,000 ft (300 m) elevation change, any recommendations on an appropriate motor/battery conversion combination that would work?
Any chance on doing a tutorial on making a 7.2v for remote control vehicles? Looking at making something for my son so he can play longer then stock battery. Wouldn’t know which bms to choose
Hello Micah, I would like to know how you film your rides? The bikes look quite floaty a bit like ET. Come on Micah, how do yer do it? Great videos BTW, I'm learning a lot 👌
Hi. I bought your book last week and read it cover to cover and it was great. I also watched a bunch of your videos which are awesome. I would love it if you would do a session on how to choose an 18650 battery that covers issues aside from the brand name, capacity, max continuous discharge and cost. For example, I am trying to choose between the Samsung INR-18650 30A and LG D1. Each are rated at 3000 mAh, max continuous discharge of 6.0 and 5.8 respectively (which gives me > than the 10A I need in a 5S2P configuration), and 3.7V, but the former is $2.18 in quantity and the latter $2.30. How does one choose? Is there any reason not to choose the less expensive cell? I see a similar issue with other batteries with almost the same specs but different prices. Does it have something to do with looking at the voltage graphs and seeing which drops more and/or something else? I don't see this topic of choosing batteries other than the very basics, which is quite easy to base a choice on, discussed anywhere.
Hey buddy! I just came across your channel and see your very educated on batteries so I'm hoping you can help me... on my bicycle I want to install 4 turn signals just as flashers not to run continuously as driving lights. So I know they are 12v but if I take say a milwaukee 12v battery to use... as it looses power I'm guessing the voltage drops and it will not run the 12v flashers as it goes below the 12v's.....correct? so what kind of small battery can I use that will last a 12 hour bike ride for 4 flashers. I guess they are around 10-20 watts each. I need a battery that is rechargeable and IM GUESSING it would have to be regulated to 12v even as it drains? Does this exist? And help would be GREATLY APPRECIATED
🛑Hello, I hope you can answer my question. I have a 26" Bayside lady's cruiser and I'm wanting to convert it into a ebike what is the easiest to install? Also is there a full kit with thumb throttle, 8+ mag. ring pedal assist front hub motor 48v 750w to 48v 1500w and a lithium ion battery 48v 16ah - 24ah? Which would you used for the style bike I have? Thanks
One bike on my watch list that I haven't seen much of yet is the Espin Nero for fat tires and utility, but more "bike-like" than something like the Lectric XP. The early bird pricing looks tempting, but with all of this coof business I'm probably not going to need a bike for 6+ months at this rate, so I'm probably not buying anything anytime soon. I suppose the nice thing about waiting is that the e-bikes just keep getting better and more affordable.
Will you ever build an Ebike battery pack with the 2170 cells? What is your opinion on them? I am trying to build a battery pack for an Emoto enduro bike and I'm trying to figure out the best cells to use. Thanks!
Hi micah! i hope you are doing well, just wanted to ask if there is any other way that you can power an ebike aside from battery, like a hub generator or a dynamo or something? that way you won't need a battery anymore right? is that possible?
Hi You are doing a perfect job on ebikes, best youtube I know. My question is as follows: ebike are becoming increasingly powerful sometimes exceeding their mechanical counterparts. What kind of helmet(s) and protection wear would you recommend when using a ebike for both commuter and recreational sports. Thanks in advance.
Hi, What are the pros and cons of having a 2 hub motors X 1 hub motor? Say 2x 500W versus a 1x 1000W? Or anything else but splitting power among 2 hubs instead of concentrating it in one hub?
I want a folding e bike that is light weight and good for city commuting that I can throw in my car and go and do some light to mid nature trails outside of town. If the tern vektron came with front suspension forks it would be perfect.
yeah, Im busy motorizing all of the bikes in the garage. At the end, Ill sell all of them cheap and build the bike of my dream. So far ive built a 1000w(48v) direct drive and a 750w (52v) mid drive. Next, I think ill try a 500w geared hub.
Hey Dave! We are getting close to finishing up our second production run of our Bandit and Trooper 35mph+ moped. We'd love to send you one to try out eventually. What do you think?
What's up man i had a question, I've built 3 ebikes now (mostly thanks to you) but a problem I run into now that I'm riding more powerful bikes is that both my current bikes (48v 1000w direct drive, and a bbshd 48v 1000) have 7 speed freewheels on them which I don't have a problem but when I get going fast I have 0 resistance in the pedals...I tried to find a freewheel with less teeth for the high gear but what do you recommend for me to still be able to pedal (at least a little) at the higher speeds
I just ordered a Voltbike 750 limited 2020. What do you think of these bikes? It's got a hard tail but has front suspension. Do you have a recommendation for a softer saddle or go with a suspension seat post? Thanks And I love your videos. Keep up the good work!
Nice videos, I already have seing all of them and I learned a lot, actually I just bought one of your books and is great I´m thinking to apply some of the stuff you mention.
I want to buy your book and support what you do is there a way to buy to get you the most from your book. Like do you get more from Amazon the books a million?
I hope you will answer my question Should the controller be equal in? Amp Matched on battery of, Quantity in amperes What is the correct ratio in amps On 2 motors from 3000w up to 6000w Can you help me with this I do not know ?
Hey Dave, with the colder weather coming quickly I am curious if you use or recommend the use of Neopreme Ebike Batter covers. Are they worth the investment & if so at what temps are they best to be utilized?
Could you please do a video on charging ebkies, could we buy after market chargers that are better than the ones shipped with the ebike, Great content, Thanks.
Any chance of testing the e beach cruisers from Soul Bikes? They just brought out a new model but is similar to previous models so want to know the improvements.
I been watching your videos for a while and if i won a book i would like the lithium battery book so i can make a powerful batter for my ebike. P.s. which cell is the best to buid the best battery with
I have a question please, i had a 48v 10ah and a 48v 1000w motor but now a 52v 19.2ah battery but if i should buy a 48v 1500W motor does it goes faster or can i keep the 1000W Motor and buy a new controller that has 40a?
Recently purchased a Pedego Ridge Runner and could not possibly be happier. Did hack the software and now have top speed of 28mph. Solid components, smooth motor engagement and awesome battery life. Rode 35 miles today in pedal assist mode and had 47% battery remaining. Most importantly, bought from a great dealer in Juno Beach FL who has parts inventory and detailed knowledge of the brand.
I am looking at Pedego mainly because of local dealer support. But the price point seems way higher than most online ebikes for similar components. Love to hear his opinion on if if they are worth it or overpriced.
Converted my old bike with a 1500 watt hub motor, spent less than 500 for the conversion and it will go 30 mph (gps verified cause the speedo that it came with is way off). Great for a person like me that had knee injuries, thinking I would never bike again... This channel is what got me into it! Keep it up!
niceee
been thinking and planning... a lot for a conversion (small problem is i dont have a bike to convert currently XD)
but may i ask how u got a 1500w hub motor and a battery for sub 500 (i guess usd).
also can i ask for a name or link for the motor and what battery u built? (cells and parallel X in_series)??
@@pasmas3217 prices are up a little bit right now, but I got the voilamart 1500 watt kit for $195.00 USD (it's now $235) on eBay. And a 48v 20ah battery (LiFePo4 so it's 16s1p, gonna replace it) from eBay for $280 USD (now going for $330).
I had wire and stuff laying around to hook it up and a circuit breaker already for a fuse, but they are only a couple bucks anyways.
I'm going to build either a 16s2p or 16s3p LiFePo4 battery out of 32700 liitokala cells this winter. Either be 14 ah or 21 ah depending on which way I go with it.
@@chrisnmichelle0218 very niceee (except the baterry is too small for me...
in my planning i am thinkint of 16s-4p which is my main price killer...
otherwise i was looking at some motors from ebay for about 180$ for 1000w, but it was just the hub, without the spokes or the wheel (which i dont want to take up as a job too...). i am gonna give a look to the motor u used, but if i can swing a sub 1000€ for the entire 1500w ebike with a 4p battery i will be very happy (consider i have to buy a bike for the conversion too...)
*welp, cant find a single motor that will ship to europe (like the one u used...)
my problem is i dont feel like trusting a kit from china... to pay for it 200$+ and wait over a month to receive...
**anyway, how happy are u from the motor specifically?
if u dont mind how heavy are u, since i am around 210pounds? (not that it should be a probblem with 1500w)
and do u ride it only on throttle/pedal_assist???
thanks for the anwers mate
@@pasmas3217 I'm the same weight as you, which is why I got the motor I did. Keep in mind, all the motors are basically the same, I've had good luck recently using AliExpress. My kit came with all the accessories, but I took the PAS sensor off cause I didn't like the way it controlled the bike, I like the control myself. So I pedal and just use throttle when I need some help. I have taken to using throttle on takeoff so I don't have to change gears ever. I usually cruise around 16 to 20 mph, and lightly throttle while pedaling if I need some help, usually shows around 100 to 300 watts when I do that.
About the battery, keep in mind that the cells make a difference as one of the 32700 cells is like two or three 18650 liion batteries. The specs on the battery are 7ah with continuous 30/35 amp discharge. So a 2p would be 14ah with a continuous discharge of 60 amps. 3p would be 21ah and continuous discharge of 90 amps. A 3p for the 32700 batteries would be like a 6p of the 18650 batteries. I got Micha's book, it is really helpful in the planning of the battery.
And like I said, honestly, the eBay sellers are selling the same things that you can get on AliExpress, just quicker shipping time. The items most likely all come from the same factory there. I am getting all of my cells through AliExpress (Liitokala cells). Not too worried, enough ebike videos reference buying from there, even Micha on this channel.
Hate to say it, but the solution to nearly every one of these questions is DIY. I’d encourage everyone to give it a shot, I’m glad I did. I’d recommend the Bafang BBSHD for your motor. This is because it includes the controller which means all of the most difficult wiring is already done for you. Paired with a simple 52v frame mount battery and it will run you around $1k. This is the setup I used for my first build and believe it or not, it only took me 30 minutes to build! There is an abundance of assembly guides on TH-cam. Definitely a cost effective way to get an e bike. $1,000 + the potential cost of a base bike will get you 35mph, 1500W, and plenty of range!
This channel is actually good for information!
For an affordable light and powerful e-bike the Luna Cycle folder deserves a mention. It has a 750 watt BBS02 and about 12-13 amp hour 52 volt battery, weighs about 40 lbs for around $1800.
No one ever mentions one of the most under rated brands : Nireeka. I ordered the nireeka Prime and it has a bafang ultra mid drive , carbon fiber frame, fat tires, and available front fork suspension and throttle. Starts at $2500 too. Please consider mentioning this bike. It deserves the recognition. Just go look at the promo video of the bike. It’s super sexy
Thanks Chris!
@Chris H, that price is a bit more then a lot of people are willing to pay for an ebike. For an example, my mom would not even pay $1,500 for an ebike much less that of a $1,000 dollars for an ebike. That could be why no one mentions the Nireeka Prime, it could also be that it does not fit a lot of people's riding style. I have an etrike conversion that cost me just about $500 to build, and there are a lot that would not even pay that as they want one of those $199 Walmart specials.
@@GenderSkins Very understandable. It’s just.. a lot of bikes with the bafang ultra motor are very expensive. So that’s why I thought I’d mention it. But I see your point
Do you have a link?
@@dianafertig2188 th-cam.com/video/ohKhrea5bbo/w-d-xo.html
Bafang bbshd is one of the best options for a cheap but powerful and cost effective bike, the main problem is you either need to be able to make the conversion yourself, or have a friend who can do it for you. I put the bbs02 on my cheap road bike that I’m used to and it rides like a dream. If you want to make a cheap ebike, converting an old bike with one of these kits is a great choice and allows for you to customize the bike to be what ever you want it to be. If you have an old bike lying around and a little bit of mechanical ability you can make a 1000w bike with a little bit of TH-cam and persistence. My total cost was my 3 year old bike that was 400$ ( no extra cost, I already had it), 500$ for the kit (around 10 screen and controller options on Amazon) , 280$ for the battery and about 2 hours of work to get it going. The limiter is 60 mph and the only limitation is my bike because it isn’t good enough for the kit (bike vibrates above 35 mph so I haven’t taken it above 40mph). Overall converting a old bike with bafang kits are amazing and you could get a bike that suits you without worrying about the electrics being included. (You can limit the power and speed to what ever you want it to be with the c18 controller so regulations and laws aren’t a problem)
These videos are really helpful, thank you. There are so many ebike choices, and so many are so similar. It's hard to make any decisions
I just got a Rize Bikes Bolt X. It's a folding step-thru frame with fat tires (3.3 inch), 750 watt motor, front suspension fork, integrated front and rear lights, big hydraulic brakes, decently large battery, and super fun for US$1699. I highly recommend this bike!
Micah these EPISODES are great for new user info, please keep giving your experienced advice.
Thanks for all the amazing content you create
After much research we settled on a Rad Rover 5 for me; and a Rad City Step thru for my wife. We couldn't be happier with these bikes. Loved the $100 returning customer discount (two hundred if you buy two bikes within 2 weeks, and their veteran $200 discount. We can't speak to reliability yet, we've put only 350 miles on each. But we would make the same purchases again.
Thanks for latest rundown. I bought the Lectric, and it's a great ebike intro. Seeing newer offerings has me really thinking about a replacement.
FYI I saw a his and hers ebike in a UK Costco. For £899 (Inc tax). You get the usual 250W motor (front hub), lights and mudguards. No disk brakes this time.
Thanks for the video. It helped answer a lot of questions.
Which bike do you recommend for hilly commuting and ling distances?
See a cop... 'mime pedal'. Love that phrase :)
Especially in the uk where throttle-only isn't allowed on a bicycle (unless you register it as a motorcycle)
Back in the 70's we would sit side-saddle on our motocross bikes and act like we are pushing them sitting side-saddle, sometimes 20 MPH.
Get a kit off Amazon or AliExpress and install it on your own frame. This way you can get the power/range combo of your choice at an affordable price... and you'll learn a lot about it in the process. Worried that its "too hard" to do? It isn't that big of a challenge, actually, but I suppose it helps to be inclined toward this type of fun project. (I guess I'm biased that way 🙄😊)
I always respect your opinions. I have a fat bike I bought from Luna Cycle 2 years ago I am very happy with it. What is your thoughts on Luna?
The new Sinch I bought now has throttle on start up. Really great bike
Very informative - thanks! I'm in Canada and looking at the Voltbike Yukon 750 for commuting about 50km/day with an opportunity to charge the battery at my office. Is this a good option, given I'm looking at all weather commuting, including -40C with snow and ice.
How about talking about BBSHD? I am ordering mine soon for my Montague Paratrooper!
In your opening bike recommendation....... Ariel Grizzly is less expensive with somewhere north of 75mile range. And it's less expensive than the E- bike dual drive bike.
Great information. This will help with selecting an ebike.
Unless you are already a cyclist, your 1st ebike should be under $1500, more like under $1000. Learn about bike maintenance and what ebikes are all about. Then save for the bike of your dreams.
Also, this is the best channel for ebike info. 👍
I'm not an avid cyclist but I do enjoy getting out and tinkering and I invested in the entry haibike(£1800).the bike does more than il ever need it to do.looking at getting my girlfriend a bike for around £1200-£1500.
I have a Radrover and Bolton ebike up grade. Very easy to install and pulls 1700w,28mph
Great videos.
We have a ride1up core 5 with a spare battery which is an amazing fast bike which she drives
We have a second aventon pace 350 that I drive but find it not as powerful. Looking to replace the aventon with either a 700 or LMTD ride1up. Which one do you recommend. We do mainly paved bike trails around 40 miles or so. I really like to get a workout she just pedals when I’m looking to see if she is hence the two batteries.
Love that you gave E-Cells a shout out...
What are your thoughts regarding using Super Capacitors with E bikes? Potential benefits would include longer range, longer battery life and better regenerative breaking. Thanks.
I am no export but only the Frey bike seems to be of good quality. Absent from this video is an important consideration. Brand support. In your next video on this topic please include a conversation about brand support.
Great advice. You should make a playlist of these e-bike shopping tips videos so they're organized. Also so the videos are streamlined for easier view count accumulation 😉
Thanks for the Ep 2. J.Q.
Micah, I’m switching the original controller out of my Super73 Z1 for one that can handle PAS. I’m looking at a 48V controller, so I know it would be able to “pull” the amp. But would it also give me a little more speed or duration?
Following Brian D. Howard’s videos, I’ve already hacked the speed (cutting the white wire) and I avg about 25mph, top speed 36mph. I also added a 2nd battery (36V 20ah) that now is my “main” because - you don’t know what u don’t know🤷🏾♂️ - the original Z1 battery is pretty anemic for all day biking at 36V 11.4ah. Night and day difference.
Hope my question isn’t too confusing, thanks...and when I’m gon’ get my free book. I need DIY Lithium Batteries.
Shalom
/Bklyn👑
bro I am in India and I made a ebike under 200dollors and it has a 350w 36/48 hub motor with 36v 7.5ah battery and its awesome. I am 13 year old and I really like your channel and it would meant a lot if you mention and help me upgrade.
Hemaang Bhatia - You’re already a badass!
@@SchoolforHackers thanks bro
I'm deciding between the biktrix duo or the juiced hyperscorpion? I want a multi purpose bike light off road, errands, transportation, street. I like speed, comfort and range with a flexible $3,000 investment but less is okay if its the right bike.
I do apologize by adding a question or 2 😅 If you get a chance can you answer mine? Which bike should I convert into an ebike with a BBSHD 68mm and a 52v 20amp triangle? My budget is less than $1,000.
Also can you do a review on the Rambo g3 at Costco online!! Haven't seen one review for it video wise 😂
I'm somewhat a handyman that knows how to build a bafang setup a. The bike that I had for the setup wasn't capable of sustaining so much of the torque I through at it. Would appreciate any advice. Thank you and have a blessed day.
Enjoyed your video!
I believe those perfect welds you refer to are fake, it’s a type of glue baked on over top of the welds and then sanded down. Look at any high end frame 5k to 10k and the welds are tight, even and rippled, not smooth.
John Evans - Interesting, I was thinking that fillet brazing is the only way I knew to achieve this finish, so thanks for the schooling.
School for Hackers your sincerely welcome😊
Good stuff bro glad to see you helping people getting into ebikes 👍👍😁
Love this channel!! Always good!
How's the cheap parts ebike video coming along?
When will you review the super73 s2?
@4:17, New York has legalized throttle Class 2 ebikes but lzimited to "less than 750 Watts" so I don't think Frey bike is you best bet :(
Every delivery guy around here has a 1000 watt bike, no one cares
Hi Micah,
I was curious what your thoughts were about the new tabless 4680 cell that Tesla introduced on Batter Day, in regards to E Bikes in general?
Are we looking at a step change in terms of Power, Speed, and Range?
Also, could the 4680 cell inspire innovations in E Motorcycles? Where do you see that industry going if 4680 cells were available?
Question. What are your thoughts on the M2s All Terrain Ultra HT. Looking for a bike to ride trails. I’m 69 years old and have been biking for 30+ years. Just looking for fun not going to go crazy.
Really been enjoying your vids in particular Micah, thanks much! Luv to see you review Ariel Rider's Kepler model.
Great channel. Lots of helpful information. Can you review bike racks for e-bikes?
Are there any e-bike models or brands that you would recommend people NOT purchase?
Hey Micah, I've been looking into e-bikes and love your videos - really informative with accessible explanations of the technology. I'm really intrigued by folding e-bikes, especially the fat bike style with suspension (weight isn't a problem but size for transport and storage is). Only snag is that I also think I want a mid-drive motor. Is there such a thing as a folding, mid-drive e-bike?
Really interesting videos. It's great to hear about all the ebikes.
Do ebike controllers have different arrangement of phase and hall sensor connection wires than the electric scooter? For example, do wires match via color codes? Do ebike motors and electric scooter motors have same phase and hall sensor wire arrangement?
there is no other channel more informative than EbikeSchool.com
just found your channel, lots of useful information around ebikes as I'm now looking to upgrade my original 250 conversion kit
A lot of these questions that you have gotten show me exactly how much people in general really know about the price of quality/safe ebikes.Not much lol
I've learned a lot from your channel keep up the great work. Here's my question, I've got a 30 mile hilly round trip commute with a 1,000 ft (300 m) elevation change, any recommendations on an appropriate motor/battery conversion combination that would work?
Hoping to get the Ebike Guide Book for the specs my 3d designed e-bikes.
Any chance on doing a tutorial on making a 7.2v for remote control vehicles? Looking at making something for my son so he can play longer then stock battery. Wouldn’t know which bms to choose
Hello Micah, I would like to know how you film your rides? The bikes look quite floaty a bit like ET. Come on Micah, how do yer do it? Great videos BTW, I'm learning a lot 👌
i just got in pre order for zipper stealth bike... hope it works ok cuz its my 1st e-bike. wish me luck
Thanks for the always interesting content.
Hi. I bought your book last week and read it cover to cover and it was great. I also watched a bunch of your videos which are awesome. I would love it if you would do a session on how to choose an 18650 battery that covers issues aside from the brand name, capacity, max continuous discharge and cost. For example, I am trying to choose between the Samsung INR-18650 30A and LG D1. Each are rated at 3000 mAh, max continuous discharge of 6.0 and 5.8 respectively (which gives me > than the 10A I need in a 5S2P configuration), and 3.7V, but the former is $2.18 in quantity and the latter $2.30. How does one choose? Is there any reason not to choose the less expensive cell? I see a similar issue with other batteries with almost the same specs but different prices. Does it have something to do with looking at the voltage graphs and seeing which drops more and/or something else? I don't see this topic of choosing batteries other than the very basics, which is quite easy to base a choice on, discussed anywhere.
I almost bought that Aventon bike. I’m glad I chose the LectricXP.
The Sinch? I have it, what's up?
Have you ever tested a Dahon electric bike? I have a couple of their non-powered bikes and love them for taking in the Cessna.
I have ordered a Sonders Rockstar bike, the price is good for what it is and what I'm looking for in an ebike.
Hey buddy! I just came across your channel and see your very educated on batteries so I'm hoping you can help me... on my bicycle I want to install 4 turn signals just as flashers not to run continuously as driving lights. So I know they are 12v but if I take say a milwaukee 12v battery to use... as it looses power I'm guessing the voltage drops and it will not run the 12v flashers as it goes below the 12v's.....correct? so what kind of small battery can I use that will last a 12 hour bike ride for 4 flashers. I guess they are around 10-20 watts each. I need a battery that is rechargeable and IM GUESSING it would have to be regulated to 12v even as it drains? Does this exist? And help would be GREATLY APPRECIATED
🛑Hello, I hope you can answer my question.
I have a 26" Bayside lady's cruiser and I'm wanting to convert it into a ebike what is the easiest to install? Also is there a full kit with thumb throttle, 8+ mag. ring pedal assist front hub motor 48v 750w to 48v 1500w and a lithium ion battery 48v 16ah - 24ah? Which would you used for the style bike I have? Thanks
Love your info waiting to buy a secondary backup bike (Winter is coming)
One bike on my watch list that I haven't seen much of yet is the Espin Nero for fat tires and utility, but more "bike-like" than something like the Lectric XP. The early bird pricing looks tempting, but with all of this coof business I'm probably not going to need a bike for 6+ months at this rate, so I'm probably not buying anything anytime soon.
I suppose the nice thing about waiting is that the e-bikes just keep getting better and more affordable.
Will you ever build an Ebike battery pack with the 2170 cells? What is your opinion on them? I am trying to build a battery pack for an Emoto enduro bike and I'm trying to figure out the best cells to use. Thanks!
Hi micah! i hope you are doing well, just wanted to ask if there is any other way that you can power an ebike aside from battery, like a hub generator or a dynamo or something? that way you won't need a battery anymore right? is that possible?
On the first question - buy the radpower bike and a 2nd battery for 1/2 the price of the super monarch?
Put an order in for a huck stinger, what do you think of those? I heard your review got put on hold due to the C word...
Great job as usual. Keep up the good work.
Hi
You are doing a perfect job on ebikes, best youtube I know.
My question is as follows: ebike are becoming increasingly powerful sometimes exceeding their mechanical counterparts. What kind of helmet(s) and protection wear would you recommend when using a ebike for both commuter and recreational sports.
Thanks in advance.
Hi, What are the pros and cons of having a 2 hub motors X 1 hub motor? Say 2x 500W versus a 1x 1000W? Or anything else but splitting power among 2 hubs instead of concentrating it in one hub?
Twice as much to go wrong ….KISS
Himiway or surface boar fat tire bike ? Can I get your thoughts on comparing these two ? Thanks .
I want a folding e bike that is light weight and good for city commuting that I can throw in my car and go and do some light to mid nature trails outside of town. If the tern vektron came with front suspension forks it would be perfect.
did you get a recommendation?
@@georgiaprickitt253 nope. Still waiting for the right bike to come out.
Can you make a video on the best foldable Ebike 14 inch
It would be great if there is an enclosed e-bike/e-motorcycle with range over 100 km and is comfortable.
yeah, Im busy motorizing all of the bikes in the garage. At the end, Ill sell all of them cheap and build the bike of my dream. So far ive built a 1000w(48v) direct drive and a 750w (52v) mid drive. Next, I think ill try a 500w geared hub.
Hey Dave! We are getting close to finishing up our second production run of our Bandit and Trooper 35mph+ moped. We'd love to send you one to try out eventually. What do you think?
Spark Cycleworks - Lucky Dave!
Is the Radrover better than the Voltbike Yukon 750. I'm interested in the limited version, step thru
What's up man i had a question, I've built 3 ebikes now (mostly thanks to you) but a problem I run into now that I'm riding more powerful bikes is that both my current bikes (48v 1000w direct drive, and a bbshd 48v 1000) have 7 speed freewheels on them which I don't have a problem but when I get going fast I have 0 resistance in the pedals...I tried to find a freewheel with less teeth for the high gear but what do you recommend for me to still be able to pedal (at least a little) at the higher speeds
I just ordered a Voltbike 750 limited 2020. What do you think of these bikes?
It's got a hard tail but has front suspension.
Do you have a recommendation for a softer saddle or go with a suspension seat post?
Thanks
And I love your videos. Keep up the good work!
Nice videos, I already have seing all of them and I learned a lot, actually I just bought one of your books and is great I´m thinking to apply some of the stuff you mention.
Hi Micah. What do you think of the NCM Moscow Plus on Amazon.ca?
Very nice review....thanks for posting them all below.
I want to buy your book and support what you do is there a way to buy to get you the most from your book. Like do you get more from Amazon the books a million?
how easy is it to add a capacitor to an ebike to increase range?
I hope you will answer my question
Should the controller be equal in? Amp
Matched on battery of,
Quantity in amperes
What is the correct ratio in amps
On 2 motors from 3000w up to 6000w
Can you help me with this
I do not know ?
Hey Dave, with the colder weather coming quickly I am curious if you use or recommend the use of Neopreme Ebike Batter covers. Are they worth the investment & if so at what temps are they best to be utilized?
Hi Micah, any thoughts on graphene batteries?
Could you please do a video on charging ebkies, could we buy after market chargers that are better than the ones shipped with the ebike,
Great content,
Thanks.
Any chance of testing the e beach cruisers from Soul Bikes? They just brought out a new model but is similar to previous models so want to know the improvements.
I been watching your videos for a while and if i won a book i would like the lithium battery book so i can make a powerful batter for my ebike. P.s. which cell is the best to buid the best battery with
This is such a great help, a great service!! Thank you ! Much needed.
What is the best way to set up a USB charger on an e-bike battery?
I have a question please, i had a 48v 10ah and a 48v 1000w motor but now a 52v 19.2ah battery but if i should buy a 48v 1500W motor does it goes faster or can i keep the 1000W Motor and buy a new controller that has 40a?
Great videos, keep them coming!
hello there thanks for the hard work what do you think of the Chinese e-bike on Alibaba are they the same as the one in us but with a different logo ?
Love your videos Micah!