How to Replace Front Wheel Bearing Hub 2007-2013 Mini Cooper
ฝัง
- เผยแพร่เมื่อ 30 ก.ย. 2024
- Buy Now!
New Wheel Bearing & Hub Assembly from 1AAuto.com 1aau.to/ia/1ASH...
This video shows you how to install a new wheel hub and bearing on your 2007-2013 Mini Cooper. Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision.
This process should be similar on the following vehicles:
2007 Mini Cooper
2008 Mini Cooper
2009 Mini Cooper
2010 Mini Cooper
2011 Mini Cooper
2012 Mini Cooper
2013 Mini Cooper
Tools you will need:
• Pry Bar 1aau.to/oa/1AXA...
• 13mm Socket 1aau.to/oa/1AXA...
• 16mm Socket 1aau.to/oa/1AXA...
• 17mm Socket 1aau.to/oa/1AXA...
• 32mm Socket 1aau.to/oa/1AAS...
• Brake Caliper Hanger 1aau.to/oa/1AXA...
• Needle nose pliers 1aau.to/oa/1AXA...
• Needle nose pliers 1aau.to/oa/1AXA...
• Pliers
• 3/8 Inch Air Impact Gun
• T30 Socket
• 3/8 Inch Breaker Bar
• Ratchet 1aau.to/oa/1AXA...
• Torque Wrench 1aau.to/oa/1AXA...
• 5mm Hex Socket
• Center Punch 1aau.to/oa/1AXA...
• Hammer 1aau.to/oa/1AXA...
• Wire Brush 1aau.to/oa/1AXA...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Well presented 👌🏾
Why remove the ABS sensor?
Ik ima do this and it’s not gonna come off
My ABS lights are on? 🤔
So an Ugga, then a dugga, when tightened back down.
No anti seize on the mating surfaces?
what's that impact wrench
Hikoki I've got one its amazing
The gun I ment
How about break disc screw..?
Reusing the old axle nut?