Losi Promoto MX COMPLETE VITAVON Build Series PART. 4 SDRC Shop
ฝัง
- เผยแพร่เมื่อ 26 ก.ย. 2023
- Back in the SDRC shop for PART.4 of this build series..carbon fiber chassis,Rear Swingarm,Skid plate and more..don't miss any videos in this series for the ULTIMATE PROMOTO MX build.
Get your VITAVON parts now!
👇👇👇
www.ebay.ca/str/pakv6121
#screamingdemonsrc #sdmotocrew #customcrew #vitavon #losipromotomx #borntoride
Music: Sinister Night
Musician: SoulProdMusic
URL: pixabay.com/music/sinister-ni... - บันเทิง
Appreciate these vids! I did aluminum overhaul watching these vids!!
Looking sick!
Gonna be SEXY! Good job 👍🏻
looks good to me ! great job😉
Thanks alot. Ya, lovin the VITAVON Build and can't wait to get more installed. 😎👍
Hi..sir
I did a change of the carbon chassis too..
Would like to ask...about the black grounding cable attached to the batt slot on the receiver...
Any effect?
As previously it was on the metal chassis...😅😅
Tha ground wire from the rx goes to the same spot on the carbon fiber chassis. It seems to work just fine,no change in handling and no interference in the radio system. 👍👊
You got the sprocket insert on the left side on wrong, suppose to go on the outside. Just wanted to put that out there,
Thanks I'll have to check on that. Lol.
I just checked the manual and both plastic bearing inserts are installed from the inside. I checked my bike it's setup correctly.
@@screamingdemonscrew thanks for checking, maybe I'm wrong they're on the inside.
You need to upgrade the BEC so you can get get 3s/4s ....Earl another TH-camr has top speed 70mph....
Yes, I've seen Earl's bike..I'm not into speed runs.. I run offroad dirt oval,rc tracks and freestyle areas.. the 2s. Is fine.. has enough power to get it done ... but Earl definitely has a fast bike.. hopefully losi comes out with a sport bike soon for us soon...😁
Oh crap the bearings don’t come lubed from Vitavon??? Fuck how am I going to get to the internal ones in my scx6 axels
Your Bearings probably have lube in them.. most are good.
It's just a old habit I have, my dad is a great mechanic and taught me to do this to all new Bearings.Make sure they are lubed before installation. Rcs, motorcycle, ATVs,ect... Bearing manufacturers often put small amounts of lube to save money.. so to be safe ,open them and add more. 👍👊😎
@@screamingdemonscrew has nothing to do with being a great mechanic, common sense/good habit!! rpm bearings need lubed because they don’t come lubed stated in there description