ฝัง
- เผยแพร่เมื่อ 5 มิ.ย. 2024
- How to make Luba blade cowers to prewent blade stuck. I use plastic sheet, because it is light, dont need to be perfect and dont make unbalance on disc. You can use aluminium or metal thin shit to make cover, but need to be more precise to make balanced and centered cover
If you want to buy any version of Luba, you can help me to go over my link, thanks
eu.mammotion.com/?ref=osa3dp
This is not a paid video. I bought Luba with my own money
Timestamps:
00:00 - Stuck blades
00:39 - How to lower Luba blades
01:30 - Unscrewing blades
02:30 - Cuting plastic cowers
04:40 - Mounting plastic cowers
07:09 - Results
08:33 - Conclusion - ยานยนต์และพาหนะ
Timestamps:
00:00 - Stuck blades
00:39 - How to lower Luba blades
01:30 - Unscrewing blades
02:30 - Cuting plastic cowers
04:40 - Mounting plastic cowers
07:09 - Results
08:33 - Conclusion
Just yesterday I was thinking of getting a shield laser cut out of aluminum for the same reason. Glad to see it works as planned.
This is what Husqvarna has done on their automowers for a decade. You'll want to avoid any friction between the blades and the cover or they won't spin out of the properly when hitting things like sticks. A very small washer or spacer of some kind should help as well as a more rigid material.
I'm very surprised Mammotion had no idea to do this as it's critical to mow or the blades will degrade very quickly.
Köszönet érte! Jő ötlet, kifogom próbálni!
00:28 My Landroid has a slight raised plastic piece that the blade screw, screws into, this keeps the blades slightly raised off of the the plastic disk. They get very little grass stuck in them, the hole of the blade is round as well and fit snuggly around the plastic screw hole. I would put a flat washer on these blade screws to give a little space and maybe use Landroids blades with a circle hole instead of those blades with the slots.
what do you think about the side blade guards, they blocked at least an inch of cutting width on both sides.
Have you tried PTFE washers?
Good idea about the cover. Have you thought about putting the blades on ball bearings? The added weight might reduce the run time though
I believe there is no room for ball bearings, and they are not really necessary
Shoulder screws I think would be ideal giving the blades plenty of slop/wiggle room. Stock they look barely loose enough.
What would be the ideal thickness of the cover? I’m thinking of using a Teflon sheet
Here is thread if you can open it
www.reddit.com/r/MammotionTechnology/comments/13qo6dh/remedy_for_stuck_blades/?
He use 0.8 sheet aluminium and cut on CNC machine. After that he say he hav 0.2 clearance between blades, disc and plastic holder disc.
Picture
preview.redd.it/pdqqric6os1b1.jpg?width=2016&format=pjpg&auto=webp&v=enabled&s=b23c3f088ae643122e8a6ed73e25a90dd521478a
Maybe this will also help you
facebook.com/groups/364111978910130/permalink/638290661492259/
Very interesting. Do you have a comment to say about the cutting quality?
About cutting quality, I haven't noticed that anything has changed
@@0ssaa Good to know🙂🙂🙂🤗
Where did you get the slotted blades, I have the 2 hole blade that are always stuffed with grass
Some guys got sloted, some with holes. I am backer from kickstarter. On Luba is sloted, but 3sets spare one are with holes. Anyways I will order some Titanium from amazon with philips screws
Also a kickstarter
Husqvarna automower has a metal cover. I have never had the blades get stuck with grass before on them.
I have a husqvarna and the blades are blocked by the same phenomenon
@BnnB I've got 2 Husqvarna Automowers and I never have the problem on them.
That's why they double the price of their mowers. 😂
why not just using longer screws so it has more clearance. I would prefer that option.
I'm doing this. I've added about 5mm of open play. My screws have a non-threaded area for a blade axel, and I add a nut and lock washer after the blade. Lastly, I spray the blades and disk with dry graphite lubricant to keep the grass from sticking. All this has made a huge difference. My blades are completely clean after mows now. There's a small amount of grass wrapped around the screw, but the blades remain freely spinning.
isn`t that much louder like with no cover?!
Avec cette solution, ça risque de créer un problème sur les branches, les cailloux et autres obstacles et de casser les lames
If you care about your lawn then you dont have stones and branches hiden in your grass ;)
What does it matter if the blades are “stuck” in the fully extended position?? The cutting part of the blade is still perfectly exposed and spinning around cutting. I think you’re “fixing” a non-problem.
The blade is meant to deflect if it strikes a stick, stone or other hard objects. If the blade cannot deflect it rapidly becomes chipped and blunt. This mower excels on lawns other robotic mowers cannot handle so they are inevitably a bit rougher
I agree
Ikea hexagon
The Luba didn't work for me, as soon as you have corners and edges in the garden it's over. Since it is a Chinese company, you have no right of return and will not get your money refunded! 😤
Make video about problem. Maybe is problem when zone is set up.
Luba seems to be a pain in the butt.
I would disagree. I really love how she works
No it isn't.
it's still a baby, will get better
@@0ssaa they have new blades with two holes instead of a slot, might wanna give those a try.
@@steffen707- slot blades are better because it is easier to clean and unstuck