I have a brand new Fighter Mini, just cut the loop behind the wheel, turned it on and now it wont accelerate under any setting?? lol I tried power cycling it few times, connected to app to check settings, nothing changed, what do you reckon?
All sorted, cheers for the reply. Simple re-install of firmware and sorted and unlocked. Probably wasn't related to the wire, just coincidental timing@@MaxBlinker
@@MaxBlinker Hello please I'm having serious problem with my scooter Teverun fighter supreme 7260r... I just received it yesterday after charging, i want connect the scooter and my phone through Bluetooth.. after it connected, it ask for update, as was doing the update, the scooter went Off and restart only for it to start showing error 7 with i later found it was communication error, so i factory reset it. The problem now is the battery 🔋 is showing Red, and blinking error 7. I'm very confused right now.
With this model, the cable cannot be simply unplugged. It is necessary to cut it. Either as in the video, or if you don't have the cable routed outside the scooter, the same cable should be routed inside the deck.
This cannot be done with the Fighter Mini, as the cable is not routed outwards as it is with the models in the video. The cable is located inside, under the deck.
It depends on the generation. However, most Fighter Mini scooter models have this cable routed outwards just like the scooters in the video. Some models, however, have the cable routed internally, and this procedure cannot be applied there.
worked perfectly on fighter 11+, speed limit is off, cruise works too, thanks
So its just safe to cut the cable. Should I leave the cut cable just hanging there or cut all the way to the plastic ?
Hello, do you know how to unlock the speed limit on a Teverun Tetra?
I have a brand new Fighter Mini, just cut the loop behind the wheel, turned it on and now it wont accelerate under any setting?? lol I tried power cycling it few times, connected to app to check settings, nothing changed, what do you reckon?
We've never encountered anything like this before. Contact your dealer and he should discuss with the supplier how to proceed.
All sorted, cheers for the reply. Simple re-install of firmware and sorted and unlocked. Probably wasn't related to the wire, just coincidental timing@@MaxBlinker
@@MaxBlinker Hello please I'm having serious problem with my scooter Teverun fighter supreme 7260r... I just received it yesterday after charging, i want connect the scooter and my phone through Bluetooth.. after it connected, it ask for update, as was doing the update, the scooter went Off and restart only for it to start showing error 7 with i later found it was communication error, so i factory reset it. The problem now is the battery 🔋 is showing Red, and blinking error 7. I'm very confused right now.
so just install a switch if police stops you?
Does anyone have a tip for me? I did this straight away and the scooter still runs at 25km/h
Can I just open the deck and disconnect the wire?
Like what is it plugged into and can it be unplugged?
With this model, the cable cannot be simply unplugged. It is necessary to cut it. Either as in the video, or if you don't have the cable routed outside the scooter, the same cable should be routed inside the deck.
Would this work on teverun fighter mini?
This cannot be done with the Fighter Mini, as the cable is not routed outwards as it is with the models in the video. The cable is located inside, under the deck.
my fighter mini has the cable on the outside?
Is it same with fighter mini?
It depends on the generation. However, most Fighter Mini scooter models have this cable routed outwards just like the scooters in the video. Some models, however, have the cable routed internally, and this procedure cannot be applied there.
@@MaxBlinker Do you mean the internal cable cannot be disconnected, to remove the speed limiter?
Grazieeee