@opiopeter263 if you go to Nengun.com and locate the BeeR section there is list of all the vehicles that you can use it on. That one it self I'm not sure.
i installed it , followed all the diagrams for 05-06 rsx type s, car has problems starting , sometimes itll start sometimes itll start on the 4-5th try... not sure whats going on here..
@blazenfire8 it's hard to say. Every car is different, and the beeR could possibly interfere with the cars normal operation. But then again, it could be something simple like a wire being spliced to the wrong location. I would retrace the steps you took and make sure everything is properly wired.
Hey man i have an s2000 ap1 Just installed all the wires besides the white wire because dont know how to setup a switch My bee r Blinks Onces when i put the ignition switch but wont do anything after Do i have a problem with my wiring or is it because i have nothing on white wire? Please let me know thankyou god bless
Also, my beeR blinks at random times, too, which is a good sign since yours is receiving power. Hook up the white wire to the e brake, and once you have it pulled up, it should work. Make sure you have the dials set as well for launching or whatever you intend to use it for!
@@S.A.MDevelopments hello Thank you for responding So the problem is That i cant reach my E brake because if i take my centerconsole i will have to break some stuff and i dont want to go that way I looked in to more videos and people just Ground the white wire and bee R works for them I did try that but same results Only blinks Once when i put the ignition key I think it may be the green wires not hooked up correctly or something i might have to stay the for a few hours more man its been a headache 😵💫
Sorry I'm 3 months late to this. But for mine I ran an extension wire from the white to my e brake sensor. There are ways around using the brake I believe people run off the clutch switch. I think it runs on the normally open switches and when it's closed it activates. If you have any other questions reach out to me on IG boosted_sam_
![How To Configure the Ultimate RPM Limiter [GOLD WEBINAR LESSON]](http://i.ytimg.com/vi/Au-7kYO4sak/mqdefault.jpg)
For any car
R-12v
Y-camshaft sensor
W- button
G- Crankshaft sensor
B- ground
wrong
I bought a bee r and it doesn’t work , can you help me please
Do you have hondata? I got Kpro and tried doing this to my 05 and it would rev and shut off, then won’t turn on again
@chrisespinal6606 no it's bone stock with stock ecu
Can u do it with the cat or u need to remove it
No, remove the cat, or it will damage it. I damaged mine a small amount, but nothing too bad.
Hey man, i dont have the h2 adapter
Can i just combine those 4 ignition wires together
You're gonna need the h2 adapter to run it is specific to certain cars to run the limiter
hey bro whats the h2 adapter for, im tryna make a diy but idk if thats even possible?
For ignition coils on the car. Making one wouldn't be impossible but you need to find out what it's made. There is a circuit board on it
I got a rsx 2002
Can bee r work on a Subaru b4 twin turbo?
@opiopeter263 if you go to Nengun.com and locate the BeeR section there is list of all the vehicles that you can use it on. That one it self I'm not sure.
Hey Bro , puedo en un d16y8?
no estoy seguro de que pudieras. tendrías que investigar por tu cuenta.
i installed it , followed all the diagrams for 05-06 rsx type s, car has problems starting , sometimes itll start sometimes itll start on the 4-5th try... not sure whats going on here..
Unplug the beeR and see if you still have the issue. Re check all the wires and make sure nothing is touching as well
Yay we have the same issue when it’s unplugged, do you think wiring is the issue
@blazenfire8 it's hard to say. Every car is different, and the beeR could possibly interfere with the cars normal operation. But then again, it could be something simple like a wire being spliced to the wrong location. I would retrace the steps you took and make sure everything is properly wired.
I mate im having some problems finding de ignition wire on mi ECU i have The diagram can u welp mi pls ?
Are you looking for the ECU wire or the one for the BeeR side?
@@S.A.MDevelopments i found The ICM wire i cut and conect The Yellow and green but The car doesn t run (sry for the inglish its not that good)
What car are you doing this on
@@S.A.MDevelopments d15b
@@S.A.MDevelopments d15b
Hey man i have an s2000 ap1
Just installed all the wires besides the white wire because dont know how to setup a switch
My bee r Blinks Onces when i put the ignition switch but wont do anything after
Do i have a problem with my wiring or is it because i have nothing on white wire?
Please let me know thankyou god bless
The white wire should go to the e brake wire. It's how I have mine set up since it's easier than wiring in a switch
Also, my beeR blinks at random times, too, which is a good sign since yours is receiving power. Hook up the white wire to the e brake, and once you have it pulled up, it should work. Make sure you have the dials set as well for launching or whatever you intend to use it for!
@@S.A.MDevelopments hello Thank you for responding
So the problem is That i cant reach my E brake because if i take my centerconsole i will have to break some stuff and i dont want to go that way
I looked in to more videos and people just Ground the white wire and bee R works for them
I did try that but same results
Only blinks Once when i put the ignition key
I think it may be the green wires not hooked up correctly or something i might have to stay the for a few hours more man its been a headache 😵💫
Sorry I'm 3 months late to this. But for mine I ran an extension wire from the white to my e brake sensor. There are ways around using the brake I believe people run off the clutch switch. I think it runs on the normally open switches and when it's closed it activates. If you have any other questions reach out to me on IG boosted_sam_
Hey bro
How do you have it wired ?
@jakebencosmeleon8063
Hola bro
Tienes Instagram para hablar por ahí mejor ?
Tengo una rsx base 02 con el motor k20a2 y lo hice igual que tú , pero no me funcionó
You have instagram?
No only TH-cam