Badgertronix cheers badger absolutely... the owner of the car was very happy too, he came around for me to check which sensor needed to be replaced l, and left with the car fixed bonus 😳😁😁👍
Nice find! When I take liquid tape it doesn't behave as I intend ((, but a shrink tube with glue adhesive lining inside is awesome for the weather sealed connection.
Thanks mate, shrinking tube with the glue it's great stuff but you know i've been repairing wires with liquid tape for a while and the cars never seem to come back so its hard for me to change, but i'll have a go next time 😉👍
Good job, clever idea to use those safety pins like you have here, you know what you're doing alright. Enjoyed watching you do this, best wishes from Alan, in Norwich UK.
Ih, o cara é brasileiro 😅. Foda, parabéns, vídeos muito bons e tá bem fluente no inglês da Inglaterra nem tem sotaque. Show, parabéns. Muito bom canal!
Very good video. I like your diagnostic tablet also. Id love if you could go into greater detail on how to test for continuity especially when dealing with loom running from opposite ends of the car. Thanks
If I might suggest, use a small resistor of a known value at the sensor next time. It can be useful to know if there is any resistance in the wiring as well. Or Safety pins as well, but they cost more than the resistor 😉. Nice video as always
Thanks Keith, i'm always open to suggestions and that is a great idea, i could very easily jump the 2 wires with a resistor and kill two birds with 1 stone. thanks for the suggestion... 😁👍
That diagnostic screen you use, delphi ds150e, is very handy and I may want to get one, so would you recommend this one, are you happy with it, and how much do they cost? Thanks, Alan in Norwich.
As a Diyer i'm very happy with it and i would recommend , off course just like any other Scan tool it doesn't work on every car but so far the only car that i had trouble with was my Renault Megane mk3. I bought mine from Ebay in 2017 and i paid £250 i believe... cheers Alan 👍
Hi I have the same problem with my Ford mondeo 2011. I have fixed one broken cable and I have one halfbroken but it still work when i measure it. It's in the rear of the car. But the sensors does still not work. Any tips? And what does the connectors called that you plug into the sensor I might have to replace one.
Óptimo! A Galaxy da minha mulher tem um problema parecido só que quando os sensores falham ouço um apito com frequência mais baixa e depois o sistema desliga. Não volta a funcionar até a ignição desligar e esperar pelo menos uns 10 minutos. Vives aonde Igor eu vivo em Wiltshire.
Como funciona esse botão? Ele serve para ligar e desligar os sensores de parking? Ao colocar em marcha ré ele ativa automaticamente o sistema ou precisa ativar manualmente no botão? E na frente, só funciona quando ativado no botão?
Boas tinha o mesmo problema mas num jaguar xf ( ou seja uma versao mais cara do mondeo) visto que e quase tudo igual a nivel de pecas.... Finalmente consegui resolver,obrigado pelo video.
Check if all the sensors are fixed in the right position sometimes the support brakes and it gets pushed in a little bit then sensing the bumper itself at all times
I have the same problem, I changed the senser, and I tested all the wires( they are all ok) but after scaning i have always the same fault "inner left front sensor", can you help me please
So good this video! Definitely can help my stupid mondeo same parking sensor. Hi guy just ask what you connect to iPad ? It’s call obd2 right? I want try buy one and fix my parking sensors next week
Finally a fix i have to try out, mine have had this error for about 6 years, and not even Ford themself did anything about it. Know what ny weekend is gonna be like now >.< Whats the carscanner you are useing btw?
Obrigado por postar este vídeo, se possível faz uns vídeos sobre o ford mondeo mk4 em português... Percebi que você fala português... Eu tenho um carro igual a diesel, e de vez e quando tenho problema é raramente acho vídeo em português Ótimo vídeo 👍
Hi. What can it be... Same thing light flushing sound buzzing and dead sensors, but I have no dtc's to indicate bad sensor. Could it be bad parking module? It looks like pcm does not detect parking module at all. Any one...
First class video showing process, order, excellent explanation and logic; well done few instructional videos are this well produced!
Had a recurring fault with front sensor. Never thought to check wiring. Sorted it now good job pal thank u.
Good job! No parts required fixes are the best. Cheers
Badgertronix cheers badger absolutely... the owner of the car was very happy too, he came around for me to check which sensor needed to be replaced l, and left with the car fixed bonus 😳😁😁👍
Excellent diagnostic process. Well done !
Scott Bailey thanks Scott I appreciate it man 👍👍👍👍
Thanks for the video, it helped me realise I had a front sensor drop down and now it’s all sorted
rob hutchinson you are welcome mate, thanks for the comment 👍
Spot on!
Great work!
LM Auto Repairs Thanks mate, much appreciated 👍
Nice find! When I take liquid tape it doesn't behave as I intend ((, but a shrink tube with glue adhesive lining inside is awesome for the weather sealed connection.
Thanks mate, shrinking tube with the glue it's great stuff but you know i've been repairing wires with liquid tape for a while and the cars never seem to come back so its hard for me to change, but i'll have a go next time 😉👍
Good job, clever idea to use those safety pins like you have here, you know what you're doing alright. Enjoyed watching you do this, best wishes from Alan, in Norwich UK.
Thanks Alan much appreciated 👍
Nicely done Igor! Huge thumbs up!
Super Mario Diagnostics Thanks mate much appreciated ... 👍 And get yourself back here missing your videos 🤙
Ih, o cara é brasileiro 😅. Foda, parabéns, vídeos muito bons e tá bem fluente no inglês da Inglaterra nem tem sotaque. Show, parabéns. Muito bom canal!
Very good video. I like your diagnostic tablet also. Id love if you could go into greater detail on how to test for continuity especially when dealing with loom running from opposite ends of the car. Thanks
Great video, I have installed the front buzzer. Do you know where is the rear buzzer located?
If I might suggest, use a small resistor of a known value at the sensor next time. It can be useful to know if there is any resistance in the wiring as well. Or Safety pins as well, but they cost more than the resistor 😉. Nice video as always
Thanks Keith, i'm always open to suggestions and that is a great idea, i could very easily jump the 2 wires with a resistor and kill two birds with 1 stone. thanks for the suggestion... 😁👍
@@CarsExposed be sure to shoot me your email. Mine is onboardtech@yahoo.com
New Level Auto I’ve just sent you an email, I’ll leave it here too carsexposed@yahoo.com 👍
Nice work cars exposed ....stay safe 👍
Thanks pal you too 👍🎄
Hi. Great video. Just wanted to know what is the program you use to read the fault codes? Are you using it with an iPad? Thank you.
That diagnostic screen you use, delphi ds150e, is very handy and I may want to get one, so would you recommend this one, are you happy with it, and how much do they cost? Thanks, Alan in Norwich.
As a Diyer i'm very happy with it and i would recommend , off course just like any other Scan tool it doesn't work on every car but so far the only car that i had trouble with was my Renault Megane mk3. I bought mine from Ebay in 2017 and i paid £250 i believe... cheers Alan 👍
It’s a little cheap Android tablet it works really well, I bought on EBay as a whole unit ...
martinguitarhd28 Yeap it’s all done by Bluetooth, just need to install Delphi to the tablet 👍
Great video. Thanks for uploading
Nicely done!
Thomas EXOVCDS thanks mate 👍
Great job and great video
FredericoNery cheers mate 👍 Happy New Year 🥳🍾
Hi I have the same problem with my Ford mondeo 2011. I have fixed one broken cable and I have one halfbroken but it still work when i measure it. It's in the rear of the car. But the sensors does still not work. Any tips? And what does the connectors called that you plug into the sensor I might have to replace one.
Good fix man. Subbed 😃
Thanks Rob, nice to see you here mate... Please come back soon i love your vids 👍
Get yourself back on TH-cam sir! I miss your videos!
Nice find!
Thanks mate....👍
Your welcome, and I just subscribed.
@@ozzstars_cars Thanks man i appreciate the support 👍
Hi. What Computer/Fault reader do you use?
Óptimo! A Galaxy da minha mulher tem um problema parecido só que quando os sensores falham ouço um apito com frequência mais baixa e depois o sistema desliga. Não volta a funcionar até a ignição desligar e esperar pelo menos uns 10 minutos. Vives aonde Igor eu vivo em Wiltshire.
Legal Carlos... Moro não muito longe estou em Bournemouth Dorset 👍
Como funciona esse botão?
Ele serve para ligar e desligar os sensores de parking?
Ao colocar em marcha ré ele ativa automaticamente o sistema ou precisa ativar manualmente no botão?
E na frente, só funciona quando ativado no botão?
Boas tinha o mesmo problema mas num jaguar xf ( ou seja uma versao mais cara do mondeo) visto que e quase tudo igual a nivel de pecas....
Finalmente consegui resolver,obrigado pelo video.
Miguel Senos praticamente o mesmo carro, fico muito feliz que o vídeo ajudou 👍👍👍
Great video /fix
How much did you charge / would it cost to fix mine ??
Col Rock100 thanks bud, this is my friends car so I didn’t charge him anything but I would expect maybe an hour labour ...
Awesome video mate. What if the sensors start beeping normally but there's nothing in front or behind the car. Do they just need a wash ?
Check if all the sensors are fixed in the right position sometimes the support brakes and it gets pushed in a little bit then sensing the bumper itself at all times
@@CarsExposed is there a way to do that without putting the car on a hoist ?
Great job.
markmark63 thanks mate 👍👍👍
I have the same problem, I changed the senser, and I tested all the wires( they are all ok) but after scaning i have always the same fault "inner left front sensor", can you help me please
Cars exposed ... Im not good with electrics. what setting on the volt metre do i set it to, and do i just stick a paperclip in as far as it goes?
Set the meter on ohms scale Ω , i would prefer to use a safe pin and becareful not to spread the connector pins
So good this video! Definitely can help my stupid mondeo same parking sensor. Hi guy just ask what you connect to iPad ? It’s call obd2 right? I want try buy one and fix my parking sensors next week
Wen Lin Thanks man I really appreciate it... the diagnostic tool that I use is a Delphi ds150 but any Ford generic scanner would do ... cheers 👍
Cars Exposed thanks
You are very welcome bud 👍
Good stuff m8! I still got to fix mine, they been giving me that error beep for a year now and its starting to get on my nerves Haha.
Motors&Me thanks mate... I can only imagine 😊 I hate rattles and beeps when I’m driving 😬🤣👍
just fixed mine .broke in same spot. also repaired rear .all working
Cameron Email Primary cool man, good job 👍 👍👍
What OBD reader system are you using please?
Delphi DS150
I have same problem ford mondeo 2013 , can you help me please?😁
Finally a fix i have to try out, mine have had this error for about 6 years, and not even Ford themself did anything about it. Know what ny weekend is gonna be like now >.<
Whats the carscanner you are useing btw?
I was using the Delphi DS150 , good luck mate 👍
Obrigado por postar este vídeo, se possível faz uns vídeos sobre o ford mondeo mk4 em português... Percebi que você fala português... Eu tenho um carro igual a diesel, e de vez e quando tenho problema é raramente acho vídeo em português
Ótimo vídeo 👍
Obrigado pelo feedback meu brother , nesse canal vai ser difícil fazer em português mas eu pensando em ter outro canal em português , vamos ver 👍
Hi, my Ford s max stereo has stopped displaying on the dash, it’s working fine but the options have disappeared from the dash display, any ideas?
Sorry bud I never came across this problem
I solved this problem by holding the stereo on of button for 10 seconds, it did a reboot and then the converse+ link reappeared 😀👍
What diagnostic tool do you use?
Delphi DS150
What OBD reader do you use?
Tom Delphi DS150 👍
Hi.
What can it be... Same thing light flushing sound buzzing and dead sensors, but I have no dtc's to indicate bad sensor. Could it be bad parking module? It looks like pcm does not detect parking module at all.
Any one...
Can you communicate with the parking sensors module ?
Can you come and fix mine for me 😭