Hello I have a Bear Valley CSM.I worked the first time I used it.I got 12 sts. Per inc.too tight so I adjusted it a tiny bit now it will noy grab stitches and knit.took it a part looked fine.am using weights but have not finished my soft weights yet.could this be the problem? Thank you. Brenda
@brendapurdum980 Hi Brenda. What yarn are you using? I am not familiar with this CSM, but as a rule of thumb, they only work with fine, fingering, lace, or sock yarn. I used DK yarn, and although it worked, the machine was extremely forced. My machine is metal, so it can withstand more abuse than a plastic one. Another reason might be the kind of yarn. The yarn has to have some elasticity. Fuzzy yarns are harder to work with, as are some types of cotton. I don't use animal fibers, so I stick to acrylic-plant blends. My last piece of advice is that you check each needle to make sure they are not bent or misaligned and make sure that the yarn carrier drops the yarn on each needle before the latches get closed. Hope this helps.
hello I want to thank those of you who gave me suggestions for my tension on my CSM 2.0 printed machine. I made adjustments and loosened attention andmake sure the yarn was a number one Stock yarnsend it has some stretch to it my machine is knitting it beautifully now. so thank you again for all of your help🎉❤
Really? That's great. But my poor floor is a little bit dented now. I dropped the weights a couple of times. Now I have a knitted rug underneath my CSM. 😔
martha soria hola Martha, la compania esta en EEUU, y se llama “Erlbacher Gearhart” Sock knitting Machine. Para ordenes internacionales, creo que tiene que llamar. No creo que aceptan ordenes internacionales por su pagina web. Ojala le ayuda esta information.
![NISAMANEE - TADA (ท้าดา) [ OFFICIAL MV ]](http://i.ytimg.com/vi/hcQHEPMmJpU/mqdefault.jpg)
Thank you so much, my first issue and you cleared that up for right away. Grateful for the info.
I'm glad I could help. Happy cranking!
That was a perfect video. Thank you so much for taking the time to make this super useful production
Thank you I have been wondering about that. You could just cut out a segment of your table so the machine is more centred. That’s what I did
Very helpful, thanks for sharing
Hello I have a Bear Valley CSM.I worked the first time I used it.I got 12 sts. Per inc.too tight so I adjusted it a tiny bit now it will noy grab stitches and knit.took it a part looked fine.am using weights but have not finished my soft weights yet.could this be the problem? Thank you. Brenda
@brendapurdum980 Hi Brenda. What yarn are you using? I am not familiar with this CSM, but as a rule of thumb, they only work with fine, fingering, lace, or sock yarn. I used DK yarn, and although it worked, the machine was extremely forced. My machine is metal, so it can withstand more abuse than a plastic one. Another reason might be the kind of yarn. The yarn has to have some elasticity. Fuzzy yarns are harder to work with, as are some types of cotton. I don't use animal fibers, so I stick to acrylic-plant blends. My last piece of advice is that you check each needle to make sure they are not bent or misaligned and make sure that the yarn carrier drops the yarn on each needle before the latches get closed. Hope this helps.
Hi I am using a 20%wool and a stretchy yarn.cant remember.it is a sock yarn.I feel it has to do with weights and tension.I can not get it right.😭
hello I want to thank those of you who gave me suggestions for my tension on my CSM 2.0 printed machine. I made adjustments and loosened attention andmake sure the yarn was a number one Stock yarnsend it has some stretch to it my machine is knitting it beautifully now. so thank you again for all of your help🎉❤
@@brendapurdum980 I am so happy that it worked for you. Happy Sock Knitting!
هل هذه الاله موجوه الان ومن اين شراءها
Here is the link to the company I bought it from. It was about 8 years ago, so I am not sure what models they have now. erlbacherknitting.com/
I’m a beginner and I have the same flooring as you in one of my rooms 😅
Really? That's great. But my poor floor is a little bit dented now. I dropped the weights a couple of times. Now I have a knitted rug underneath my CSM. 😔
@@HelenSiersKnittingfingers yes it was already in the house when we moved in. Ooh no ! Yes dropping those aren’t fun!
holaaa ,me podes decir ,,como conseguir esa maquina,,,soy de Uruguay
martha soria hola Martha, la compania esta en EEUU, y se llama “Erlbacher Gearhart” Sock knitting Machine. Para ordenes internacionales, creo que tiene que llamar. No creo que aceptan ordenes internacionales por su pagina web. Ojala le ayuda esta information.
Socks knitting machines atometic menul wark frans for job socks knitting machine