HY300 smart projector black screen solved!
ฝัง
- เผยแพร่เมื่อ 23 ธ.ค. 2024
- if you messed with the settings in the projector and the screen went black don't fret. follow my directions to restore it to the factory defaults and have your projector working again. this only works if the screen went out after adjusting the settings.. this happened to my projector and I successfully restored it through the button combinations I give you.
May not work for everyone. but if it did please donate a little. it really helps me...
Cash app ID: cash.app/$Gera...
if this helped you please hit like and subscribe..
Thank freaking goodness this is the only video for my LED PROJECTOR that’s yellow and black but after the last step it brought up a screen that looks different and it doesn’t say reset, it ask do you want standard, off , and so on, so I put it in off because it was on standard. Worked like a charm!!!!!! Thank you!!!
I had the same problem, the screen became black ! , It worked for me by using these steps :
1/ turn on your prijector and wait for 1 minute, it is necessary to wait.
2/press : down button ,then left button , then OK button( you are now on the settings)
3/press: left button 3 times, then presse OK (you are now on the other settings menu when you can find factory reset setting)
4/press :left button , then OK , then Ok
when you do all these steps,the screen will appear ❤
You can use the catalog to fully understand the process, it is like a guide
Very good video. What you taught really works. 👍 👋 Makes me very happy after following your instructions, my projector is back to normal. No need to buy new projector. 👍
Great to hear!
thanks man, it's worked. it's happen when i update the new firmware (date 24-09-24). for who does not work keep trying, the setting menu will have lag or delay, so you have to click it fast. good luck.
Thanks!!! This saved me :D
@everyone saying it doesn't work, here is how it will:
The problem is sometimes the projector doesn't take the first couple button presses accurately. It will react only every second button press or so.
1. Make sure your room is completely silent
2. Power up the projector.
3. Turn volume on the remote to max (just press + a couple of times (max volume is about 20 button presses)
4. Now press home button
5. Use the arrow keys randomly to make sure the projector makes a bup sound every time you press a button accurately, because sometimes it's delayed or button presses are not registered at all.
6. Press home key again
7. Now follow his instructions, push the buttons slowly (!!!), make sure every push of a button makes a sound. Then it will work.
During the black screen the buttons don't make any noise at all because it's frozen
Meen my bro worked like charm 🎉🎉🎉🎉
This save my life 😅
You are genius 👌
Thank you 🙏☺️
It is perfectly working.....I luk so many videos...bt tnkfully ur video worked
@@amitshahjinesh awesome!! How about a sub?
This doesn't work for me. When I start the process of pressing the middle button one time, nothing happens. When I press it again, the screen turns black and I follow the next steps, nothing happens. Once I unplug the projector and plug it back up, do I power it on? Because nothing happens I've tried every possible way and my projector still gets stuck on the black screen
After seeing the condition of the remote in the video, I now understand. The first step is to smash the remote against the floor or wall, hard but gently.
My remote cant be use. How can i get to factory setting with mouse?
the new UI is better but sm1 help when i try to to open the apps its just stuck on the loading screen and the screen cast QR code is just not showing up, plz help
Thank you.. it saves me the trouble.
I have a smart projector i can't find the build number i want to access development mode.can you help?
Work on 350 black?
Very good video. It worked👏
You are a life saver mate. Thanks for the tip
@@MrMGD how about a sub?
Ouhhh tq... Very² works.. so thankfullll❤
can you help me it happened on HY320 and this won't work on it same black picture please help😢
Took alot of tries but it worked
Mine won't start it is just Displaying the word "smart projector" what should I do
if anyone knows how to fix this for people who have different HY300's please let me know because my screen navigation aint the same as this
My issue is I adjusted the keystone correction too far and it’s just a blue screen. Assuming this will work as well
Oh my god thank you, you just saved me
Muchas gracias nos ayudo muchisimo 😊❤
Please help it's not working for me
Super effective !!!
I turned the brightness down to zero by mistake , i can hear it but cant see the home screen to turn the brightness back up 🙈
Tried reset but it didnt work.
Next time you play with color temperature and it goes black. Don't panic, Click left or right and your screen will be back.👍
thank you very much is working now
Thanks man
tq ur the best
Muchas gracias!!! Funciona correctamente 😊
@@lidialopez9428 can I get a sub?
@@koolfingaz por supuesto 👍
Bravo bruda legend
Superb idea
Does not work
If you've waited long enough for it to boot up and be sitting on the home screen, the button combination I gave you if it's the same model will factory restore the device.. otherwise you have a different problem all together.
Bravo bruder
Bro you Are my good hahahah thanks 😅
love u ! 😅
Same doesnt work 😢
dont work
Didn’t work with me.
After updating firmware the settings icon is not opening or give a black screen.
Trying your method but it doesn’t work unfortunately 😢
Same with me
Same, after the last update now I dont have access to settings
Me too
@@IkerBenyahiaMe too after the last update my screen went black n I can't restore it
Switch it on. Once on main screen press the power button. Go to reboot/restart press ok. When the screen goes black, keep pressing the home button non stop until the logo appears. Then, you will see a big circle appear and something written in mandarin. It will restart by itself and take you to home page, rebooted to its factory settings. Download your apps again, and log into them again.
Sadly didn't work 😢
Did not work for me
It will work. The problem is, the projector doesn't take the first couple commands accurately. Make sure it's absolutely silent in your room. Listen for the little bop sounds the projector makes when you press a button on the remote. Press anything until the bops come accurately. Then press home. THEN follow his exact commands in order and make sure you hear a bop sound with every press of a button. Then it works
Hi i have the same projector i do what you say because i cant enter in settings to rebot but she does work can you help me?
I have more clear video about black screen fixing