BMW E70 2013 X5 Rear Shock & Mount Replacement with Bilsteins

แชร์
ฝัง
  • เผยแพร่เมื่อ 29 ต.ค. 2024

ความคิดเห็น • 80

  • @mcplutt
    @mcplutt 17 วันที่ผ่านมา +1

    My 2013 E70 30d uses these Bilstein B4 part numbers: 19-184074 and 19-184081. Standard suspension, no extras.

  • @omargayle6634
    @omargayle6634 3 หลายเดือนก่อน +1

    Great video, just did my rear shocks last week because of this!

  • @esentials
    @esentials ปีที่แล้ว +1

    just about to my 2011 X5 7 seater. seems easy with all the explanation. I did my front struts with a whole of other mounts, so this is final. I changed the airbag in Mar 22, this will complete the rear end. Thanks heaps

    • @esentials
      @esentials ปีที่แล้ว

      just done the RIGHT rear. was really easy after watching the video. Not much different between the 7 seater and 5 seater. Issue i had was the bump stop was completely demolished. Here is my suggestion for anyone doing this, if you are going to take the time to change the struts then change the rubbers and the bump stop. its not expensive but i bought the rubbers but not the bump stop. i installed the new shock with the rubber minus the bump stop. Bump stop will arrive in 3 weeks. will redo the right shock with the additional part than change the left side complete. So annoying considering it was Xmas & the New Year Break and they don't have the parts and will have to come from overseas. Should have planned better. anyway my 5 cents worth.

    • @jcx2bby
      @jcx2bby  ปีที่แล้ว +2

      @@esentials thanks for the updated information. It's hard to know exactly what all pieces an "older" car will need until you start taking it apart sometimes.
      Appreciate you taking the time to comment.

  • @fastech7635
    @fastech7635 7 หลายเดือนก่อน +1

    Great video and exactly all the steps I went through first the tailgate adjustment still had noise so it has to be shock on same side right rear

    • @jcx2bby
      @jcx2bby  7 หลายเดือนก่อน

      I also have a video on how to fix a rattle in the hatch if that's what you're experiencing. Thanks for commenting

  • @ennisventer8038
    @ennisventer8038 2 ปีที่แล้ว +1

    Thx, could not work out where to noise was coming from. Will replace mine this week. Great, clear and very informative video!

    • @jcx2bby
      @jcx2bby  2 ปีที่แล้ว

      You're welcome, I know how annoying that rattle is!

  • @simplelangperorock
    @simplelangperorock 2 ปีที่แล้ว +3

    Hey man,
    Thanks 🙏 so much for the e70 Front Strut vid. I would not have done mine w/o it. time for the ‘rear’ that’s why I’m here :)
    You the man!

    • @jcx2bby
      @jcx2bby  2 ปีที่แล้ว +2

      So glad you found my janky videos helpful, truly pleased to hear it. Thanks for taking the time to comment. Good luck with the rears!

    • @simplelangperorock
      @simplelangperorock 2 ปีที่แล้ว +1

      @@jcx2bby
      🤩 Btw, my e70 has a 3rd row seater. maybe there is a difference in upholstery disassembly. We’ll see. 🙏’let you know

  • @michaellefevers4248
    @michaellefevers4248 ปีที่แล้ว +1

    Thanks for the video. I completed the work on my 2013 a few weeks ago! 🏁

    • @jcx2bby
      @jcx2bby  ปีที่แล้ว

      Sweet Mike! Hope it rides like new again

  • @vnamg8217
    @vnamg8217 2 ปีที่แล้ว +3

    Wow, that doesn't look difficult at all. Great video, thank you.

    • @jcx2bby
      @jcx2bby  2 ปีที่แล้ว +1

      Nope, easy stuff!

  • @matreyia
    @matreyia 2 ปีที่แล้ว +2

    Apparently my 2011 x5 50i has different rear shock mounts than yours. And the third row seating set up makes access to the shock top mount extremely labor intensive. Will first check if I can access as easily as you did in this video, then will post video if it is different.

    • @jcx2bby
      @jcx2bby  2 ปีที่แล้ว

      Ok I'm interested to see how the 3rd row of seats affects this job. Good luck and be sure to update us.

  • @htownblue11
    @htownblue11 ปีที่แล้ว +1

    Good video my man. Did this job previously to finding the video and you explained it well.

    • @jcx2bby
      @jcx2bby  ปีที่แล้ว

      Thanks TJ, appreciate the feedback

  • @Poppinwheeeeellllllieeeeez
    @Poppinwheeeeellllllieeeeez ปีที่แล้ว

    i love my e70d. just the favorite bmw that I have ever owned.

    • @jcx2bby
      @jcx2bby  ปีที่แล้ว

      I love my E70 too. I just kinda wish I didn't have the N63 although it has been kind to me so far.

    • @danielrd7493
      @danielrd7493 ปีที่แล้ว

      @@jcx2bby why? I have the N55 and would prefer the N63 , although maintenance is higher

    • @jcx2bby
      @jcx2bby  ปีที่แล้ว

      @@danielrd7493 the performance of the N63 is wonderful. But these motors are known for short lifespans. Overcomplicated to the highest degree. Oddball exhaust manifold and turbo placement that absolutely cooks the heads and valve seals. My N63 has had the seals replaced once already. Only has 123K on it.

  • @danielrd7493
    @danielrd7493 ปีที่แล้ว

    Hey jcx,
    I replaced the OEM shocks with a pair of Bilstein B4s, just like you did in this video (procedure was a little different since I have the third row). After replacing, the car rides extremely harsh, with the shocks bottoming out often. Wife is pissed. Before I go down the path of replacing these brand new struts with OEM, just wanna confirm that the ride quality shouldn't get much harsher, and that the car definitely shouldn't be bottoming out. My old shocks that I replaced were completely worn out with no spring back, just an FYI.

    • @jcx2bby
      @jcx2bby  ปีที่แล้ว +1

      The ride was pretty much the same for me with the new Bilsteins. Definitely not harsh. If you feel like you're bottoming out, that's usually an indication of bad springs. Are you airbags in the back? If it's coils, and the old shocks were really that shot, it's possible that she isn't used to having spring dampening back there. Dunno, that's kind of a confusing situation

    • @danielrd7493
      @danielrd7493 ปีที่แล้ว

      @@jcx2bby it’s air bags in the back. I can’t imagine I installed this wrong since. Put everything back in in the correct order. I appreciate your help

    • @jcx2bby
      @jcx2bby  ปีที่แล้ว +1

      @@danielrd7493 yeah it's a pretty simple job, I doubt you did anything wrong. Please let me know what you find out is the fix. Good luck.

    • @RegoTVs
      @RegoTVs 28 วันที่ผ่านมา

      did you get a resolution? I also have a 3rd row with air suspension in the rear

    • @danielrd7493
      @danielrd7493 28 วันที่ผ่านมา +1

      Yeah, I had ordered the struts for the second row E70, which is longer than the third row. $300 mistake. Ordering the struts for the third row restored the ride to normal.

  • @chrisjay1231
    @chrisjay1231 2 ปีที่แล้ว +2

    Longer stroke of the Bilsteins should give you better ride quality & handling as well. How do you like them compared to the stock ones? Did you need to replace the rear shock mounts as well? It looks like your car has the self-leveling suspension but not the 3rd-row seat?

    • @jcx2bby
      @jcx2bby  2 ปีที่แล้ว +2

      Bilsteins are great, possibly a slight improvement in ride, but to be honest it rode great before. The shock mounts in the rear aren't really a wear item so there's no need to replace them. It's basically just an aluminum adapter. Yep, air suspension equipped, but no 3rd row seats. I don't know if it was special ordered that way or not. It's how it was when I bought it.

  • @matreyia
    @matreyia 2 ปีที่แล้ว

    About to do this job this week. Will post if I find out anything else that might make it easier.

    • @jcx2bby
      @jcx2bby  2 ปีที่แล้ว

      Any tips from your experience?

    • @matreyia
      @matreyia 2 ปีที่แล้ว

      @@jcx2bby I will edit the rear shocks this weekend. I have to finish the 1988 528e alternator replacement and LPFP replacement and front seat redying and sound deadening beforehand. But yeah...third row seat x5 is VASTLY different and way more work than this version.

    • @jcx2bby
      @jcx2bby  2 ปีที่แล้ว

      @@matreyia yeah I remember watching your vid of removing the 3rd row....yikes! Ok will watch your vid when you post.

  • @AM4project
    @AM4project 4 หลายเดือนก่อน +1

    @3:10 i was never able to remove that bolt, in fact it broke the head off. I had to buy a new lower control arm

    • @jcx2bby
      @jcx2bby  4 หลายเดือนก่อน

      Oh man that blows

    • @mcplutt
      @mcplutt 17 วันที่ผ่านมา

      Mine came apart easy.

  • @simplelangperorock
    @simplelangperorock 2 ปีที่แล้ว

    great work. thank you. do you know if Sachs struts also has longer spindle shaft than the stocks?

    • @jcx2bby
      @jcx2bby  2 ปีที่แล้ว

      Sorry I'm not sure

  • @AM4project
    @AM4project 2 ปีที่แล้ว

    I own a 2011 bmw x5 with 87k miles. Do you think that changing the shocks will make a big difference in the way it rides? Do you have a suggestions on shocks that might make the car ride more plush? I am not looking for a sporty ride as I do a lot of highway driving. Also do you believe this car has a high decibel noise when cruising? Mine is at about 71dbl - thank you for the great video.

    • @jcx2bby
      @jcx2bby  2 ปีที่แล้ว +1

      I appreciate the comment. Do you have airbags in the back of your X5? If so, there's not going to be much you can do to make the ride more plush unless you swap the bags out for springs. Then you can look at different spring rates and things like that. If you do swap for springs my understanding is that you'll have to code the airbags out of the car computer or you'll get some error lights. But replacing the shocks on their own probably isn't going to do too much for making your ride more comfortable. And I actually think my X5 is pretty quiet when I'm on the highway given how heavy and powerful it is.

    • @AM4project
      @AM4project 2 ปีที่แล้ว

      @@jcx2bby thank you - mine is a diesel, no airbags. Maybe the louder sound comes from the engine. thank you for your reply. I will consider swapping the struts/shock at 100k

    • @jcx2bby
      @jcx2bby  2 ปีที่แล้ว +1

      @@AM4project I'm sure the diesel adds to the noise level a bit. 100K miles is a good time to swap out suspension components or at least give them a good once over. Good luck with it

    • @theundergroundlairofthesqu9261
      @theundergroundlairofthesqu9261 2 ปีที่แล้ว +1

      Tire choice can affect both ride comfort and highway noise. You could go to a smaller diameter wheel if yours is one of the larger diameter ones. (Being a diesel, probably not.) We bought ours used with Goodyear run-flats that were wearing out, and eventually moved to Michelins and they really are quiet on the highway. Concrete is always noisier, of course, but the only time its loud for us is in a construction zone where the concrete has been scraped in preparation for asphalt. Then weird loud noises begin! But 99.9% of the time, .the Michelins are wonderful.
      Oh, and changing shocks can make a big difference in ride! I've not done it on an E70, but I can say that switching to Bilsteins can sometimes just make the ride harsh. If you're replacing shocks, consider Sachs/BOGE.

    • @jcx2bby
      @jcx2bby  2 ปีที่แล้ว

      @@theundergroundlairofthesqu9261 this is good advice. One of the best things I did on my X5 was ditch those awful run flat tires. Way quieter and softer ride now. I went with Goodyears on my car and haven't looked back.

  • @MohammedAlsharq
    @MohammedAlsharq 7 หลายเดือนก่อน +1

    Thanks alot for the great video
    Plzzzzz help me
    I have changed both rear for my wife car with new ones
    After have it out from Garage, while driving on the bumps you feel the car like jumping form back side when ton drive on bumps
    I went back to the garage and he told that we need to do calibration for air suspension after changing shock observers
    He did that calibration
    But still the car jumps after driving on any bumps
    Please help me

    • @jcx2bby
      @jcx2bby  7 หลายเดือนก่อน

      I didn't have to do any recalibration and even if you did that wouldn't cause wandering issues when going over bumps.
      Either something is super loose or you have bushings worn completely out.

  • @GamerPro-nw5lf
    @GamerPro-nw5lf 2 ปีที่แล้ว

    would it be possible to put front and rear shock absorbers from another car on the bmw e60? What car could it work from?

    • @jcx2bby
      @jcx2bby  2 ปีที่แล้ว

      I'm not much of a modder....sorry I can't answer that question.

  • @battlehrfred
    @battlehrfred 8 หลายเดือนก่อน

    Hi I great video sir lots of great detail on this video!! ty for posting,excellentttt , I have a 2013 x5 35i x 3.0 litre engine,. wonder if you or "anyone can help me"??? im confused..... possibly you can help ... i purchased my vehicle 4 years ago and i am second owner... i dont know who owned it before (bmw would not give me any information).------ i purchased it from a used independent dealership. tell me if im wrong as this is my first bmw . ok , in the morning when i firsttouch the door handle, (comfort access) the car "wakes up" (after it was locked at nighttime) and it makes a buzzing sound underneath the vehicle somewhere for 4-5 seconds. its been doing this ever since i owned it. So I just figured /assumed it was the/ air pump/compressor for the rear air bags and all was ok. So,2 weeks ago i went to my brothers cabin that wasnt used for years so i took lots of camping gear and material ( 300 lbs estimated) just in case i had to do carpenter repairs and i also towed a utility trailer with a 450 lbs quad for about 3 hours driving on the highway. All was fine with the weight and towing, until, when i got back home 4 days later from my trip and realized the next morning ,the vehicle was rough riding...but when i wake it up in that morning it would still make that buzzing sound/ as i thought air bag compressor. i felt that this vehicle was not riding right and was actually looked low on the back.. so i put the vehicle in my garage jacked it up and when i checked the rear suspension of the vehicle i was suprised to see that my vehicle has coil springs in it not air bags..!! for some reason thought it had air bags because of the 4-5 second buzzing ( i think bmw calls these Air Bags, Air Springs". ) ok, the thing is. i dont see any air compressor at the right front, underneath the passenger side floor ogf my 2013 x5 35i x . i took of the plastic shields all along underneath this area and dont see any compressor or even any air lines or electrical plugins for a compressor..., althought on utube here it was said that it was underneath the passengers floor. not so on my vehicle... there is no pump/compressor or any lines at all to connect to any compressor.... i figured now that the original owner converted this vehicle to springs ( the number on the rear springs OEM 6 779 860 WHICH IS A good bmw part number.... im stumped... i noticed that both coil springs were both broken badly and i did not use the vehicle and crossreferenced the part number to Rockauto and got these 2 new springs and installed them. i noticed that the right rear gas Shock ( i have to order 2 new shocks and 2 new mounts also from rockauto)was not pressurized when i unscrewed the 3 top shock mount plate nuts because i could not get the lower bolt to moved because it was seized ,( i have to heat to heat it up)so i just took out the 3 nuts on this top mount and shock assemble and lowered the control arm assembly enough to install these new springs, the problem now is im still stumped as to what that noise is and is it possible that this vehicle one came with "air bags" and the origanal owner just replaced these springs because of a problem with air bags?? again i cannot see any compressor anywhere or any sign of any air lines nowhere.... im baffled i would love to hear your input/thoughts.suggestions. thank you in advance for you input

    • @jcx2bby
      @jcx2bby  8 หลายเดือนก่อน +2

      That noise is your fuel pump pressurizing the system to get ready to start the engine.
      Not at X5s came with air suspension in fact most probably just had coil springs like yours. I believe the air suspension was mainly for X5s with 3rd row seating.

    • @battlehrfred
      @battlehrfred 8 หลายเดือนก่อน

      ty sir i greatly appreciate your great courteous response , ty again Sir

  • @E70dino
    @E70dino 2 ปีที่แล้ว

    Hey just wondering how long you’ve had your x5 and how much miles do you have on it

    • @jcx2bby
      @jcx2bby  2 ปีที่แล้ว

      I've had it for about a year and a half. It had 98K miles when I got it. Has 112K on it now.

  • @chrise202
    @chrise202 2 ปีที่แล้ว

    How do you compare the ride with the rear air bags vs springs? Which one is softer in your opinion ?

    • @jcx2bby
      @jcx2bby  2 ปีที่แล้ว +1

      The shock absorbers work with the air bags....they don't replace them if that's what you meant. Not sure if I quite understood your question

    • @chrise202
      @chrise202 2 ปีที่แล้ว +1

      @@jcx2bby Updated my question sorry I must have been too tired when asking it :). Essentially the question is springs vs air bags on rear suspension. Which one is softer in your experience?

    • @jcx2bby
      @jcx2bby  2 ปีที่แล้ว

      @@chrise202 ah, I see. So the X5 I have is fitted with airbags in the back and I have not replaced them with springs. My car is pretty stiff which allows sublime handling for such a big car.
      My wife's X3 has springs on the back and while I don't find it near as stiff, it is also the base model X3 sdrive 28i, nothing special at all about it.
      Personally I think springs allow for more cushion, but only in stock form. Once you install any kind of lowering spring, it will stiffen the car up as well.
      Idk if that answered your question, but it is my experience with such things

    • @chrise202
      @chrise202 2 ปีที่แล้ว +1

      @@jcx2bby Understood, I'd also describe mine as "pretty stiff". Totally agree on the handling aspect. Its just somewhat annoying if driving on a average paved surface. Thank you for your replies! All the best!

    • @jcx2bby
      @jcx2bby  2 ปีที่แล้ว +1

      @@chrise202 yes, it can be annoying when you're just driving around town, I totally agree.
      I have a lowered Camaro and I live close to StL...these roads and that car, ye gods the harshness.

  • @Thewayitis111
    @Thewayitis111 2 ปีที่แล้ว

    Good wee video 👍
    I was just wondering if this is Clint Eastwood hows changing the shocks as it sounds just like him 🤔 😉🤠😎💥🤠

    • @jcx2bby
      @jcx2bby  2 ปีที่แล้ว

      I've gotten the Clint Eastwood thing on some of my lawnmower repair videos too....I am always amused by this as I think I sound nothing like him, but appreciate the comparison!

  • @baims8367
    @baims8367 ปีที่แล้ว

    them sway bar links look a bit tired to

  • @kenchiu1083
    @kenchiu1083 2 ปีที่แล้ว

    How many miles does your rear shocks die?! Thanks.

    • @jcx2bby
      @jcx2bby  2 ปีที่แล้ว

      Depends on a lot of things like environment, driving style etc. But if yours have never been changed 80K to 100K miles is a good interval to swap them out at.

    • @kenchiu1083
      @kenchiu1083 2 ปีที่แล้ว

      @@jcx2bby Thank you.Including front shocks changed during 80k-100k miles?!

    • @jcx2bby
      @jcx2bby  2 ปีที่แล้ว

      @@kenchiu1083 The fronts take more wear than the rear, due to the weight of the engine and the stress of the steering. I'd be examining things by the 75K mark at least, with the idea of replacing them around 80-90K.
      It is all very subjective and situations vary. If quality components were installed, you might be good well past the 100k mark...you just have to inspect things and go from there.

    • @kenchiu1083
      @kenchiu1083 2 ปีที่แล้ว

      @@jcx2bby Thanks for your experience.

    • @jcx2bby
      @jcx2bby  2 ปีที่แล้ว

      @@kenchiu1083 I appreciate you watching my vids Ken. Good luck with your repairs.

  • @annihil8ted993
    @annihil8ted993 3 ปีที่แล้ว

    This was my conclusion too! I sound insulated almost every piece of trim in the back and there was still clunking on dips. Thank you for making this vid!
    Do you have torque specs by any chance? With newtis down, I can't find torque specs.
    When you were checking for looseness towards the end, what were the two pops?

    • @jcx2bby
      @jcx2bby  3 ปีที่แล้ว +1

      The pops were the floor jack moving when i was prying under the tire.
      I never got the torque specs but just used my long 1/2 ratchet from HF and tightened those bolts as much as possible. They were incredibly tight when I loosened them.
      Even now, I still sense a slight thud from that dang liftgate/hatch/whatever. I am tempted to weld that latching mechanism solid as I believe the movement in it is what causes the hatch to pop.
      Thanks for commenting.

    • @annihil8ted993
      @annihil8ted993 3 ปีที่แล้ว

      ​@@jcx2bby​ if you pull on the latch alone does it move? Sadly you can't weld it because it moves. Idk why I never though of this just now but have you tried driving with the gates open? I think that'd help identify the rattling. I also have a spare which make me wonder if some of the clunk is from the tire bouncing around.

    • @eurotrashdtm
      @eurotrashdtm 3 ปีที่แล้ว

      Loving these videos. I’ve got a 2011 E70 w/96k miles. Have you noticed any improvement in ride quality with the suspension refresh?

    • @jcx2bby
      @jcx2bby  3 ปีที่แล้ว +1

      @@eurotrashdtm thanks Dino. My X5 certainly is much quieter now with a ghr new suspension pieces, but I'll be honest, it drives about the same. I was expecting some improvement in drivability but it was so good before, even with the worn out stuff, it didn't improve the way I thought it might. Just shows how well built the suspension is on these E70s. Say what you want about the test of the car, but the chassis and suspension are beautiful.

  • @Mortis3897
    @Mortis3897 2 ปีที่แล้ว

    Its bilschtain not stien

    • @jcx2bby
      @jcx2bby  2 ปีที่แล้ว +2

      I get it, I lived in Germany for 4 and a half years. But you'd be hard pressed to find someone in the states who didn't look at you like an oddball for saying it that way.

    • @mcplutt
      @mcplutt 17 วันที่ผ่านมา

      @@jcx2bby stain 😊