I put a used 45 acp case on my primer follower. Fits perfectly, adds a little more weight, and I haven’t had any primers hang up in the primer feeder since then.
If I would own such a setup I would most definitely add a vibration feeder for primers. No way I would watch my machine run like that and then maually feed primers every couple of minute, like a peasant ;)
Awesome i am waiting on my 1050 super and would like to set it up like yours. It will arrive with a .223 set up and i will have to set it up for 9mm . I subscribed and will see if you have any video’s on setting it up..thanks 👍🏻👍🏻👍🏻👍🏻👍🏻
I've got 2 Dillon's. A 27 yr old 550 that I bought new. And a 650 that's about 5 yrs old. I do all rifle on my 550 and pistol on 650. I would love to sell the 650 and get a 1050 and bullet feeder and automate it. U have a nice set up as do I. Just want a little more to it
Nice video. Can I ask who makes that output adapter and which hose do you have hooked up to it? I have one from FFB and it's terrible. All my rounds get hung up on it. Thanks and subbed.
Thanks am looking to upgrade to exactly that setup, curious about what type of aftermarket hold down dies, and I see you have a little camera for powder check ?
@@Seabass355_USPSA thanks, I have a mark 7 on my 650 with ammo vision as my powder check and it works great. I only reload 9mm have you or would you do any press upgrades, shellplate bearing, level 10 inovations etc. ? Thanks again from Canada
@@snowgorilla9789 sorry I have zero experience with the 650 so I can't make any recommendations on how to upgrade it. Here are the upgrades that I made to my 1050: Reloading Innovations premium bearing kit & spill control tabs. Reloading InnovationsStarlight Everglades hold down die Inline Fabrication Case feed stop Inline Fab primer tube rack Inline Fab Bin Barrier Fast & Friendly Brass Expander die Entirely Crimson powder quick disconnect
I don't know if there is any videos out there. It's hard to find info on it. I would offer to do a video but mine is already set and I don't want to mess with it.
My press will arrive on Friday, I purchased some 9mm .355 luger 115gr FMJ round nose bullets and ramshot true-blue powder, problem im having is that I can't find any information for the bullet I purchased its not a name brand, so do I just follow the powder and dimension for another bullet of the same specs?
Hey Seabass355, hope your liability insurance is up to date for making recommendations of anything other than "consult published and tested reloading data"
Thanks buddy! You know me too well. It's all about moving pictures! I like those purple covers you got there ;)
and I thought my pair of Dillon 650's was a good set up. You sir have a good set up.
I put a used 45 acp case on my primer follower. Fits perfectly, adds a little more weight, and I haven’t had any primers hang up in the primer feeder since then.
Great demonstration
Go check out www.markvii-loading.com/ and www.dillonprecision.com/
550B user here and gotta say that setup is orgasmic 💪🏻
ThankYou For Making The Video
That is a awesome setup
If I would own such a setup I would most definitely add a vibration feeder for primers. No way I would watch my machine run like that and then maually feed primers every couple of minute, like a peasant ;)
I'm a peasant and bought 12 pick up tubes instead 😂. Load up the tubes while watching TV or something and then I can do 1200 at a time.
Peter is a clown.🎉
Awesome i am waiting on my 1050 super and would like to set it up like yours. It will arrive with a .223 set up and i will have to set it up for 9mm . I subscribed and will see if you have any video’s on setting it up..thanks 👍🏻👍🏻👍🏻👍🏻👍🏻
Awesome set up. Thank you for sharing. What kind of bullet feeder is it? Is it from Dillon’s or aftermarket?
It's aftermarket. Mr. Bulletfeeder by Double Alpha.
@@Seabass355_USPSA I’ll check it out. Thank you.
I've got 2 Dillon's. A 27 yr old 550 that I bought new. And a 650 that's about 5 yrs old. I do all rifle on my 550 and pistol on 650. I would love to sell the 650 and get a 1050 and bullet feeder and automate it. U have a nice set up as do I. Just want a little more to it
If you want to automate, 1050/1100 is definitely the way to go. I've had a lot of friends automate a 650 and eventually upgrade.
@@Seabass355_USPSA yes I'm not messin with automate a 650. I want the badass on my bench
th-cam.com/video/ScOo9qxAohQ/w-d-xo.html here is my setup
Nice video. Can I ask who makes that output adapter and which hose do you have hooked up to it? I have one from FFB and it's terrible. All my rounds get hung up on it. Thanks and subbed.
@@shootloadrepeat range panda for both adapter and hose.
How much was this auto loading set up you have?
Great job 👍
What do you use the bullet tray in the front for?
@@Mayhemsr1 I no longer need it. Just legacy from before the bullet feeder.
what bluebullet and powder are you using?
Blue Bullets 125grn RNnd titegroup
Just curious how much money you have into the entire setup? Just to give an idea of what I would be looking at. Thanks
www.mark7reloading.com/1050-pro-autodrive-3-500-rph
www.dillonprecision.com/s000211
Thanks am looking to upgrade to exactly that setup, curious about what type of aftermarket hold down dies, and I see you have a little camera for powder check ?
Everglades hold down die. For the camera just search backup camera on amazon, there is hundreds of options.
@@Seabass355_USPSA thanks, I have a mark 7 on my 650 with ammo vision as my powder check and it works great. I only reload 9mm have you or would you do any press upgrades, shellplate bearing, level 10 inovations etc. ? Thanks again from Canada
@@snowgorilla9789 sorry I have zero experience with the 650 so I can't make any recommendations on how to upgrade it. Here are the upgrades that I made to my 1050:
Reloading Innovations premium bearing kit & spill control tabs.
Reloading InnovationsStarlight
Everglades hold down die
Inline Fabrication Case feed stop
Inline Fab primer tube rack
Inline Fab Bin Barrier
Fast & Friendly Brass Expander die
Entirely Crimson powder quick disconnect
Great video! Wondering if you have or know of any good info/videos for setting up the F&F Expander/Hold Down die? Thanks!
I don't know if there is any videos out there. It's hard to find info on it. I would offer to do a video but mine is already set and I don't want to mess with it.
@@Seabass355_USPSA I understand. I ended up watching the Dillon RL1100 setup video and decided to set mine by feel. Worked perfect! 👍
Nice set up. Where did you get the output chute?
Range Panda's website
@@Seabass355_USPSA Thanks
What would the cost be on this setup? I want it lol
www.dillonprecision.com/
www.mark7reloading.com/
My press will arrive on Friday, I purchased some 9mm .355 luger 115gr FMJ round nose bullets and ramshot true-blue powder, problem im having is that I can't find any information for the bullet I purchased its not a name brand, so do I just follow the powder and dimension for another bullet of the same specs?
Yes. If you're loading at max, just bump it down a few tenths and work up to it.
@@Seabass355_USPSA Do I just start from the minimum powder measurement?
@@TheExtremeRace yeah you can start at minimum as well.
Hey Seabass355, hope your liability insurance is up to date for making recommendations of anything other than "consult published and tested reloading data"
How much does it cost to get one of these ?
Be sure you are sitting down and have taken your meds before you search out the cost of his setup, and he uses only for one caliber
how i can get a equipment like this a least manual not automatic ?
Search for Mark VII reloading
What bullets are you using?
The Blue Bullets 125grn coated round nose.
I need one but to coverall I would need 5 that’s expensive.
Cool setup but sorry for me that’s not reloading it’s a factory
What was the total cost of that whole entire setup?
Arm and a leg.
@@TheExplosiveGuy dang so like 20 thousand, that’s crazy
Cool
Qual o tipo de motor que v está usando nessa máquina?
Mark VII Auto drive. www.markvii-loading.com/autodrives/dillon-autodrives/1050-pro-autodrive-3-500-rph.html
cool
I'm probably just jealous. But that QC, not 'reloading '. Lol. Yeah.....I'm just jealous.
at what point did the little tabs for "pins" become so hard to deal with they added pussy tabs ?? LOL ... been reloading for over 15 years...
So what? You do you.