Hey buddy, I’ve watched your video a bunch of times. I was wondering, the ground (or common) tab of the microswitches... did you solder them to anything? Did you daisy chain them between each other? Any help regarding the wiring would be greatly appreciated! Thank you!!
Yeah, it's been a while since I did this, and might have a photo of the final wiring somewhere. If you search for tutorials - something like this I've found helpful in the past: th-cam.com/video/BC7YEGL2R20/w-d-xo.html
Hey Jono, thanks for your reply. That video was helpful! When you show your microswitch on the video, there's three wires sticking out, I was wondering what that third one was, but I watched the video on the link you sent me and I've done a lot of research these past few days. Thanks again!
Hey how did you find the pin out or did you just brute force it (tried a bunch of combos until you got it)? I'm looking at a similar PCB and am wondering if there's a datasheet you spotted online or something to figure out all the keys.
TheDashius yeah just trail and error. There may well be data sheets available, but as each model of keyboard is a little different - not sure how worth while it would be? It doesn’t take too long hack and discover, which certainly helped the learning process for me
Thanks for the video. Do you have any idea what does exist under the blob? and what do I need to know if I want to build a processor on a PCB from scratch?
I believe it's the micro controller, the blob is epoxy holding it on. Not sure what you mean, but hacking the keyboard is a pretty fun and probably least expensive way to make lots of buttons for projects. There is lots of info online and TH-cam
Yes! This is exactly how it was used. It was for State of Play Games INKS pinball machine cabinet. Can’t find any footage but some pictures here: cutandconstruct.com/cnc-cut-arcade-unit-beautiful-pinball-app-inks-designed-tsuruta-architects/
Finally someone who's a bit faster, thank you. I've been looking for charts on how V G D C pins (as shown in 1:42) translate to VCC, GND, D+ and D-, but couldn't find any. Can you please check this on yours?
It’s been a few years so I can’t fully remember- it was either trying to blob on a bit of solder in hope it would take, or hot glue... maybe a bit of both. I wrapped it with bits of card and a vinyl sticker to protect it afterwards
@@therealjamespickering they all differ so much. I wonder if there’s anyone else that can help advise - I expect you have tried tutorials / info online? Other things I can think is conductive tape or conductive paint, but imagine these won’t for a strong bond
@@mikisafe2905 I totally forgot about this comment. I actually ended up moding a small generic rubber dome keyboard. I colour coded the keys for things like engine's,shields,weapons etc and blanked out the unused keys. I also removed all the numpad keys and turned that side into a none slips platform for my joystick so my left hand is in easy reach of the keys
@@mikisafe2905 basically I used car model paint to paint the key caps to color code them. For example Blue for any key with an engine function, green for shields, yellow for targeting computer. Keys with no in game function I painted the key cap black blanking it out. And removed all the number keys grouped together on the right end of the keyboard so the joystick can sit there.
BIN90 they are all very different - as you can see it takes a bit ‘debugging’ to figure it out - but can be a cheap and dirty hack to make something cool 👍 good luck!
excuse me can you please tell me where can i get the rubber of the keyboard buttons?.because i have lost f6 and f7 button rubber. now my keyboard is not working..
My circuit board looks completely different :( there aren't open contacts, the lines on the clear plastic go into a white plastic connector thing on the circuit board... :| I'm not really sure how it can be used. Any advice? Thanks. Edit: Never mind, I found a video with a keyboard that looks more similar to mine. I didn't use the circuit board really I connected my wires directly to each side of the plasticy sheets and it worked. :)
Without too much more hacking perhaps using a bluetooth keyboard? Just need to think about power supply - search to see if there are any tutorials out there.
Keyboard was free. This was to experiment the potential of using something quite simple to get many switches for free... But you are right about other low cost options, including Arduino. Thanks
Surprising as it may sound, this is actually a way more informative video than anyone might think.
@Hassan Mohammed stfu don't believe him and greyson decker lol
I agree! Gotta hand it to this guy. Not a word. Yet, knocked it out of the park. Pleasantly received, Mr. Sandilands. Thank you.
this would be cool to do to a old CB type microhpone, and use it on chat programs, and use the keyup as the button to key the mic for the program.
would you give us, at least in the description box all the pin combinations that you had in that notepad?
it would help me a lot. thanks
But every keyboard is pretty different so unless u have the same exact keyboard as his it probably won’t be any use to u
Thank you I need that to make myself a cheap handbrake/sequential shifter for my Fanatec Wheel with an arcade joystick that I already have.
same,but i rather mod the keyboard for the cheap controllers
@@mr.cantillasz1912 aaa
Hey buddy, I’ve watched your video a bunch of times. I was wondering, the ground (or common) tab of the microswitches... did you solder them to anything? Did you daisy chain them between each other? Any help regarding the wiring would be greatly appreciated! Thank you!!
Yeah, it's been a while since I did this, and might have a photo of the final wiring somewhere.
If you search for tutorials - something like this I've found helpful in the past: th-cam.com/video/BC7YEGL2R20/w-d-xo.html
Hey Jono, thanks for your reply. That video was helpful! When you show your microswitch on the video, there's three wires sticking out, I was wondering what that third one was, but I watched the video on the link you sent me and I've done a lot of research these past few days. Thanks again!
What the basic theory/ concept of it, its jumper gnd to one of another or potive one? Tx u mr 🙏
Thanks u so much for the amazing tutorial may I ask which 2 wires do u have to connect to where if u wanted to bind the button p on the pcb
Hey how did you find the pin out or did you just brute force it (tried a bunch of combos until you got it)? I'm looking at a similar PCB and am wondering if there's a datasheet you spotted online or something to figure out all the keys.
TheDashius yeah just trail and error.
There may well be data sheets available, but as each model of keyboard is a little different - not sure how worth while it would be? It doesn’t take too long hack and discover, which certainly helped the learning process for me
@@JonoSandilands Nice, I've taken a similar approach in the hopes of making a little gamepad or something...
Thanks for the video.
Do you have any idea what does exist under the blob? and what do I need to know if I want to build a processor on a PCB from scratch?
I believe it's the micro controller, the blob is epoxy holding it on.
Not sure what you mean, but hacking the keyboard is a pretty fun and probably least expensive way to make lots of buttons for projects. There is lots of info online and TH-cam
is it possible to use that board to turn a nes controller into usb? (basically connect it to a nes controller)
5 from the left + 23 from the left = D Key
That's at least what my keyboard was. The keyboard is really old and is made by Hewlett Packard (HP)
Good idea for pinballm cheaper than encoder
Yes! This is exactly how it was used.
It was for State of Play Games INKS pinball machine cabinet.
Can’t find any footage but some pictures here:
cutandconstruct.com/cnc-cut-arcade-unit-beautiful-pinball-app-inks-designed-tsuruta-architects/
@@JonoSandilands wonderfull work
i did the same but for osu keyboard (2 cherry mx switches)
nice idea :D
Finally someone who's a bit faster, thank you. I've been looking for charts on how V G D C pins (as shown in 1:42) translate to VCC, GND, D+ and D-, but couldn't find any. Can you please check this on yours?
v=VCC G=GNG D=D+ D-=C.
Better not mess with the usb connectors, just with the keyboard interface
How did you connect to the contacts? I'm struggling to find a god way to attach wires to the board.
It’s been a few years so I can’t fully remember- it was either trying to blob on a bit of solder in hope it would take, or hot glue... maybe a bit of both.
I wrapped it with bits of card and a vinyl sticker to protect it afterwards
@@JonoSandilands Thanks. I've gone through three keyboards so far, with no luck.
@@therealjamespickering they all differ so much. I wonder if there’s anyone else that can help advise - I expect you have tried tutorials / info online? Other things I can think is conductive tape or conductive paint, but imagine these won’t for a strong bond
How can i handle it with piano board 37 keys ..with 12 wires
What is that black circle thing in keyboard pcb board
Kunalmaity Photographics I think it’s the micro controller the black blob is epoxy holding it in place - all keyboards will be slightly different
I'd love to do something like this to create custom control panels for my classic star wars flight sims
oh man notify us when done! i'm excited to see it.
@@mikisafe2905 I totally forgot about this comment. I actually ended up moding a small generic rubber dome keyboard. I colour coded the keys for things like engine's,shields,weapons etc and blanked out the unused keys. I also removed all the numpad keys and turned that side into a none slips platform for my joystick so my left hand is in easy reach of the keys
@@JohnSmith-xq1pz man this is pretty much awesome but i didn't understand much in the comment...
@@mikisafe2905 basically I used car model paint to paint the key caps to color code them. For example Blue for any key with an engine function, green for shields, yellow for targeting computer. Keys with no in game function I painted the key cap black blanking it out. And removed all the number keys grouped together on the right end of the keyboard so the joystick can sit there.
hank you for helping my project
Need a detailed explanation
2:30 and that's what you call, a 0% keyboard
Can be use this for ets2 ??
Or how do I test which port is for whar
Is the configuration common for all keyboards?
BIN90 they are all very different - as you can see it takes a bit ‘debugging’ to figure it out - but can be a cheap and dirty hack to make something cool 👍 good luck!
Jono Sandilands Thank you sir. I 've scraped the black insulation away from the pins and I don't get any output when I probe the pins. Any advice?
I did connect the test probe to a 5V and then probe it. Still no output.
excuse me can you please tell me where can i get the rubber of the keyboard buttons?.because i have lost f6 and f7 button rubber. now my keyboard is not working..
Have you checked on Amazon etc?
Maybe this is what you need welovekeys.com/
Or a new keyboard :D
Hi Jono is this work for two players? Thanks
does this project need soldering,
A little bit
Is this just multiplexed switches or what?
Sinan Akkoyun yeah exactly. It’s just a cheap and dirty way to get lots of buttons for a quick project and learn about prototyping
My circuit board looks completely different :( there aren't open contacts, the lines on the clear plastic go into a white plastic connector thing on the circuit board... :| I'm not really sure how it can be used. Any advice? Thanks.
Edit: Never mind, I found a video with a keyboard that looks more similar to mine. I didn't use the circuit board really I connected my wires directly to each side of the plasticy sheets and it worked. :)
Every Keyboard is Diffent
I can't understand stylus I'm in wrong way but anyway I hate that's song. but it will useful to me
Thank you, I will help you with your video. I made a mechanical keyboard out of such a controller
Anyone active here ?
How would you do this but make it work over bluetooth?
Without too much more hacking perhaps using a bluetooth keyboard? Just need to think about power supply - search to see if there are any tutorials out there.
Is that tigers jaw??
d Gib it sure is. I was late to the game discovering then... the album was on repeat for weeks
I will use this with mechanical switches.
lotsa testing find key are you sure its correct. it just worked. i was waiting you find sleep mode key :))))
Ha! Yeah pretty boring but it's just a learning process... and patience
Sss
how much keyboard cost. i think you can get cheap arduino board lower price. can work as keyboard
Keyboard was free. This was to experiment the potential of using something quite simple to get many switches for free...
But you are right about other low cost options, including Arduino. Thanks
Can someone help me do this for sum button box haha
Hey Not Cool!
Hiro Daigo doa faq duz the title even mean? Hacking USB controller FOR gamepad?!ߧ
رائع!!!! كيف لم أفكر في ستخدام دائرة لوحة المفاتيح لصنع جهاز تحكم