Wish you could do more top 10 gear list videos Mr. Sage. Loved these series as well. Maybe Top 10 Headphones closed back Top 10 Headphones open back Top 10 Mic Pres and etc... p.s. Loved your Top 10 Monitor Controller videos as well
Thanks for the video. I have an old pair of AKG K240’s, 600 ohms. Any ideas for under $300…? Using with a Motu M4 into MacBook Air. Just starting out with home recording. Thanks
Thanks for watching! I haven't used either of these amplifiers before, so I can't speak about them with direct knowledge of their sound/DAC, but it looks like the RME ADI-2 Pro FS has incredibly low THD regardless of your headphone's impedance. This may be a good option for you! SageAudio.com
Could you please clear this for me. How do we normally connect headphone amps to a computer recording set up. What are the many ways. Thanks for the video.
Thanks for watching and leaving a comment! You can either connect the headphones directly to the computer using a 1/4" to 1/8" adapter, or you can use an interface/external amp that connects via USB or thunderbolt. If you're using an external amp or interface it'll need to be capable of D to A conversion. If it has a USB connection on it then it most likely has this capability. SageAudio.com
Hey Olajide! Thanks for watching - since we don't have all of these amplifiers, we don't want to make suggestions but instead provide the information we have access to. SageAudio.com
@@sageaudio Hi, any opinion of the Burson Audio Playmate 2? Ithink its not specifically for Mixing/Mastering. But do you think it would be good for that? I need to be able for it to connect to my Focusrite Scarlett 2i2 external soundcard. If it could work with the Scarlett, do you think it would pair nicely with Sennheiser HD 660S that i currently own..? 🙂
I need a headphone amplifier so that the artist recording can hear themselves louder but not have to cut the gain up etc. What do you recommend for that ?
Hey Mena! Thanks for leaving a comment. I've only ever used an hp4 when tracking, so unfortunately I can't speak to whether or not it's accurate enough for mixing and mastering. Also, I wasn't able to find a frequency response chart on the hp4, so I can't tell if it produces a relatively flat response. SageAudio.com
I noticed that at the end of the video there were AKG k702 headphones. (I think) I had already asked the question about the AKGk701 in several videos. but without a successful answer. i am new to working with a DAW. (I work with presonus studio one artist, and SSL 2 interface, & AKG k701 headphones). question: if I want to record a vocal I don't have enough volume with the SSL2 interface, especially for a rock song or for example a heavy song where you have to roar nice and loud; I only hear myself and almost no music (the interface is then at its loudest volume) so I definitely need more volume. which amplifier would be best for that. The AKGk701 is also an open headphone, I noticed that when I set the volume to its loudest in my vocal booth, the recording microphone slightly records the sound from the headphones. (not so bad in itself, because for other things he gives a beautiful representation). so I can also use another headset for recording. Most importantly, I need to have enough volume in my headphones; (after 20 years in hard rock scene, it is necessary ... haha). which affordable headphone amplifier can take care of that, or other suggestions. THx 4 the VID. (google translate i'm dutch.)
Hey Patrick! It looks like those headphones should be pretty loud given their relatively low impedance, but I get what you're saying since I've had this issue before as well. The best solution I think, and the one I use when I'm tracking my vocals but am having trouble hearing the music, is to first export the mix with a limiter on the master output to increase its volume. I then import that stereo mix into a new session and track the vocals over it. This way, the mix is loud enough to hear, but there is little latency. (If you try this by just putting the limiter on your mix session's output and record the vocal in that session, you'll most likely get latency that makes recording difficult.) Once you're done recording your vocals, export just the vocals, and then import them back into your original session, take the limiter off the master output and continue producing/mixing. Be sure to maintain the same sampling rate/bit depth throughout this process. I hope this helps! SageAudio.com
Any thoughts on the new Capi 500 series lunchbox headphone amp? I was looking for $500 or less and it appeared on my radar. It’s suppose to be similar to an API board headphone amp. Build prices are $270 and do it yourself is around $160 plus soldering. I was actually going to get it and Gearslutz members were praising the Schiit 3 to my surprise at $99.
Hey Matt! Thanks for reaching out - although I haven't personally tried this headphone amp, the headphone amps on API consoles are fantastic. That said, if you get to try this one out and find that they're similar then it definitely sounds worth it. Sorry I couldn't give you a personal opinion about the amp - hope you find one that works great for what you're doing! SageAudio.com
Anyone successfully use fiio K5 pro amp/dac for mixing with 250ohm headphones? Not sure if this amp/dac is more specifically for gaming or if it even matters - I have beyerdynamic DT770’s at 250ohm
Can someone help? I'm new to making music and bought some headphones to use with my laptop that has 250 ohms and was told I would need a headphone amp but I need one under at least $100
Hey Chrome! This may be a good option: www.sweetwater.com/store/detail/PowerPlay1--behringer-powerplay-p1-personal-in-ear-monitor-amplifier I haven't used it personally, but it looks like what you're trying to find. SageAudio.com
Thanks for watching! It'll depend on the headphone amp you're using. Some have D/A conversion - in this instance you'll be able to connect it directly to the computer using a USB port. Some only accept line-inputs - when this is the case you'll need an interface or other D/A converter to convert the digital signal into an analogue/electrical one, that is then fed into the headphone amp. Thanks! SageAudio.com
Hey Deciverse! Thanks for the comment! Looking into it, it seems like a decent option. It has low THD and XLR inputs - couldn't find any info on the frequency response, but if it's relatively flat it'll work well for mixing and mastering. SageAudio.com
@@fernando6801 Soloist 3GT by Burson... you can swap out the op amps to make it sound perfect with your headphones.. and its got 10 watts from the SE out... very nice amp
@@dixter1652 I know I love bass in my music to sound clear as long as it doesn't make any speaker sound distorted. What DAC would be perfect for this amp? And do you use a pre-amp, too? What is the brand name of the DAC and pre-amp? Thank you in advance.
@Dixter What do you think of the Burson Conductor 3GT and / or 3XGT? Is it better to have a separate DAC for the Soloist 3GT? If so, which DAC? dcs Lina DAC or Aurender or Auralic?
@@fernando6801 The Conductor 3GT and 3xGT are very nice... they take up less space than separates...they sound good and the option to stream to them is nice too... they are built like tanks... the entire chassis is a heat sink...
Why would you hook up Phonitor to cheap speaker ! Needs good speakers its a state of Art Piece of Gear ! And its Studio Quaility Preamp in them ! Needs Expensive Speakers ! 😮😊
Hello guys! I have a question: If I am using headphones (Sennheiser 650HD) audio interface (Motu Ultralite MK3 Hybrid) can I get a much better sound quality out of my mentioned headphones if I would use high quality headphones Amplifier? In other words, are Headphones Amplifiers giving a better sound quality then audio interfaces?
![เปิดคำทำนาย นอสตราดามุส - บาบา วานก้า ปี 2025 คนทั่วโลกต้องเจออะไรบ้าง? | แฉ 11 ธ.ค. 67 [2/3] |GMM25](http://i.ytimg.com/vi/xmTIKWJUMPM/mqdefault.jpg)
Wish you could do more top 10 gear list videos Mr. Sage.
Loved these series as well.
Maybe
Top 10 Headphones closed back
Top 10 Headphones open back
Top 10 Mic Pres and etc...
p.s. Loved your Top 10 Monitor Controller videos as well
Thanks for the video. I have an old pair of AKG K240’s, 600 ohms. Any ideas for under $300…? Using with a Motu M4 into MacBook Air. Just starting out with home recording. Thanks
check out the drop THX amps, they seem pretty beefy
Thanks for the info! Any thoughts on the DAC and Headphone amps in the RME ADI-2 Pro FS / ADI-2 DAC FS?
Thanks for watching! I haven't used either of these amplifiers before, so I can't speak about them with direct knowledge of their sound/DAC, but it looks like the RME ADI-2 Pro FS has incredibly low THD regardless of your headphone's impedance. This may be a good option for you!
SageAudio.com
these are the ones that go in the vocal booth right?
Could you please clear this for me. How do we normally connect headphone amps to a computer recording set up. What are the many ways. Thanks for the video.
Thanks for watching and leaving a comment! You can either connect the headphones directly to the computer using a 1/4" to 1/8" adapter, or you can use an interface/external amp that connects via USB or thunderbolt. If you're using an external amp or interface it'll need to be capable of D to A conversion. If it has a USB connection on it then it most likely has this capability.
SageAudio.com
@@sageaudio Thanks! Got it... In the first line of your reply, you mean headphone amp right.
It sounds like you are just reading the specs and marketing copy of each product rather than providing any meaningful opinions or guidance.
Hey Olajide! Thanks for watching - since we don't have all of these amplifiers, we don't want to make suggestions but instead provide the information we have access to.
SageAudio.com
@@sageaudio Hi, any opinion of the Burson Audio Playmate 2? Ithink its not specifically for Mixing/Mastering. But do you think it would be good for that? I need to be able for it to connect to my Focusrite Scarlett 2i2 external soundcard. If it could work with the Scarlett, do you think it would pair nicely with Sennheiser HD 660S that i currently own..? 🙂
I need a headphone amplifier so that the artist recording can hear themselves louder but not have to cut the gain up etc. What do you recommend for that ?
Any feedback on the Crimson Audio HPA100? I’m considering getting one but haven’t found any meaningful reviews.
Hi sir can you please guide or suggest which DAC should I get for my JBL earbuds?
Hey Method Man! What's your budget?
SageAudio.com
@@sageaudio sir around 300 dollars
Can i connect any amp to my audio interface maudio410 firewire by balanced or unbalanced cable?
Can I use these with AMT headphones? Also is pre amp and amp different?
¿Que tan bueno es el sterling sha4?
Can you do a top 10 under $500?
What is your opinion on presonus hp4 when it connecting with my presonus audiobox 96 interface for mixing and mastering?
Hey Mena! Thanks for leaving a comment. I've only ever used an hp4 when tracking, so unfortunately I can't speak to whether or not it's accurate enough for mixing and mastering.
Also, I wasn't able to find a frequency response chart on the hp4, so I can't tell if it produces a relatively flat response.
SageAudio.com
@@sageaudio thanks for Replying , which h.p Amp will you recommend under 200 $
?
I noticed that at the end of the video there were AKG k702 headphones. (I think) I had already asked the question about the AKGk701 in several videos. but without a successful answer. i am new to working with a DAW. (I work with presonus studio one artist, and SSL 2 interface, & AKG k701 headphones). question: if I want to record a vocal I don't have enough volume with the SSL2 interface, especially for a rock song or for example a heavy song where you have to roar nice and loud; I only hear myself and almost no music (the interface is then at its loudest volume) so I definitely need more volume. which amplifier would be best for that.
The AKGk701 is also an open headphone, I noticed that when I set the volume to its loudest in my vocal booth, the recording microphone slightly records the sound from the headphones. (not so bad in itself, because for other things he gives a beautiful representation). so I can also use another headset for recording. Most importantly, I need to have enough volume in my headphones; (after 20 years in hard rock scene, it is necessary ... haha). which affordable headphone amplifier can take care of that, or other suggestions. THx 4 the VID. (google translate i'm dutch.)
Hey Patrick! It looks like those headphones should be pretty loud given their relatively low impedance, but I get what you're saying since I've had this issue before as well.
The best solution I think, and the one I use when I'm tracking my vocals but am having trouble hearing the music, is to first export the mix with a limiter on the master output to increase its volume. I then import that stereo mix into a new session and track the vocals over it.
This way, the mix is loud enough to hear, but there is little latency. (If you try this by just putting the limiter on your mix session's output and record the vocal in that session, you'll most likely get latency that makes recording difficult.)
Once you're done recording your vocals, export just the vocals, and then import them back into your original session, take the limiter off the master output and continue producing/mixing. Be sure to maintain the same sampling rate/bit depth throughout this process.
I hope this helps!
SageAudio.com
@@sageaudio thx this definitely worth a try
Lynx Hilo TB3 or SPL XE + 768xs? Phonitor X or Xe for reference mixing? I’m mixing exclusively on headphones: LCDX & clear ProMG... Thank you
Thanks for watching Chester! Sadly I haven't used those personally so I can't make a recommendation.
SageAudio.com
@@sageaudio I just saw the Hilo in this video ... I thought you tested it... Thank you. Great content on this channel!
Any thoughts on the new Capi 500 series lunchbox headphone amp? I was looking for $500 or less and it appeared on my radar. It’s suppose to be similar to an API board headphone amp. Build prices are $270 and do it yourself is around $160 plus soldering. I was actually going to get it and Gearslutz members were praising the Schiit 3 to my surprise at $99.
Hey Matt! Thanks for reaching out - although I haven't personally tried this headphone amp, the headphone amps on API consoles are fantastic. That said, if you get to try this one out and find that they're similar then it definitely sounds worth it. Sorry I couldn't give you a personal opinion about the amp - hope you find one that works great for what you're doing!
SageAudio.com
Anyone successfully use fiio K5 pro amp/dac for mixing with 250ohm headphones? Not sure if this amp/dac is more specifically for gaming or if it even matters - I have beyerdynamic DT770’s at 250ohm
Can someone help? I'm new to making music and bought some headphones to use with my laptop that has 250 ohms and was told I would need a headphone amp but I need one under at least $100
Hey Chrome! This may be a good option: www.sweetwater.com/store/detail/PowerPlay1--behringer-powerplay-p1-personal-in-ear-monitor-amplifier
I haven't used it personally, but it looks like what you're trying to find.
SageAudio.com
Im in the same situation as you, I bought some beyerdynamic DT990 pro 250 ohms, what AMP did you buy? could you help me?
How would you connect these to your computer?? I need help 😂
Thanks for watching! It'll depend on the headphone amp you're using. Some have D/A conversion - in this instance you'll be able to connect it directly to the computer using a USB port. Some only accept line-inputs - when this is the case you'll need an interface or other D/A converter to convert the digital signal into an analogue/electrical one, that is then fed into the headphone amp.
Thanks!
SageAudio.com
@@sageaudio no thank you, your Channel has help me in many ways keep up the grind man 🙏🏾💪🏾
What's your opinion on thx AAA amplifier and it's applicability to mixing and mastering
Hey Deciverse! Thanks for the comment! Looking into it, it seems like a decent option. It has low THD and XLR inputs - couldn't find any info on the frequency response, but if it's relatively flat it'll work well for mixing and mastering.
SageAudio.com
I don't think I would buy any of those amps... how did you come up with that list...
What would you suggest? What would your set up involve?
@@fernando6801 Soloist 3GT by Burson... you can swap out the op amps to make it sound perfect with your headphones.. and its got 10 watts from the SE out... very nice amp
@@dixter1652 I know I love bass in my music to sound clear as long as it doesn't make any speaker sound distorted. What DAC would be perfect for this amp? And do you use a pre-amp, too? What is the brand name of the DAC and pre-amp? Thank you in advance.
@Dixter What do you think of the Burson Conductor 3GT and / or 3XGT? Is it better to have a separate DAC for the Soloist 3GT? If so, which DAC? dcs Lina DAC or Aurender or Auralic?
@@fernando6801 The Conductor 3GT and 3xGT are very nice... they take up less space than separates...they sound good and the option to stream to them is nice too... they are built like tanks... the entire chassis is a heat sink...
Wow
Thanks for watching!
Why would you hook up Phonitor to cheap speaker ! Needs good speakers its a state of Art Piece of Gear ! And its Studio Quaility Preamp in them ! Needs Expensive Speakers ! 😮😊
Hello guys!
I have a question:
If I am using headphones (Sennheiser 650HD) audio interface (Motu Ultralite MK3 Hybrid) can I get a much better sound quality out of my mentioned headphones if I would use high quality headphones Amplifier?
In other words, are Headphones Amplifiers giving a better sound quality then audio interfaces?
th-cam.com/video/zMwFx6jSIkI/w-d-xo.html
Skip to the Amp part
My musical fidelity X can v3 beat all.
Thanks for watching!
SageAudio.com
Nothing is made for poor ... We shouldn't exist
Topping L30
Never listen to this man smh. How do you put a $3k class A amp in 9th