For some ease you can also just run the line up into the left rear corner where he got his “long rod” from. You can mount the filter almost as high. Most of us won’t be submerging our tailgate.
@@BenStinnett apparently they say to route it up front so when it purges the fumes wont go in the cab. Anyone who has done the hack in the back hasn’t complained tho. I’m going to put it in the back. I’ll comment if I notice fumes.
ARB version is great but there's a generic version on amazon that is half the price and just as good in quality... if not the exact same kit with 3rd party labeling. Awesome video!
Hey Greg! Good catch, on the 5th Gen 4Runner, the front diff and trans actually already have their breathers up in the engine bay from the factory, no clue why they didn’t just do the rear diff too 🤷♂️
If I recall correctly, the locker has a smaller diameter breather hose to a little one way valve. I’ve seen some folks on the forum cut the valve, install a barbed fitting, and extend the hose, but not strictly necessary imo. Hope this helps 👍
I'm confused by the the point where you inserted the hose up under the hood. Before you installed the filter the hose was running vertical, then when installing the filter it had disappeared. Did I miss a step?
Please make a video going over what all you have done and plan to do to your 4Runner love the color and the wheels I want to start doing over landing but I only have my 2016 mustang lol so it won’t do too good but more videos and a build video love your channel!
I realized my tube melted an inch hole/gash near exhaust pipe towards the front passenger side. Is there anyway I can relocate the tubing that isn’t damaged like for example, somewhere up in the rear?
Oh dang no way? Makes sense I guess the exhaust gets super hot. I would say just try to tie it off as high as possible. Most importantly, just keep that in mind before doing and sort of water crossings in the future!
Hello, new to all this off road stuff... I"m sold on installing this Diff Breather. My question are there front differential and transfer case breathers that also need to be installed OR anything else for that matter? Thanks
Hey Malcolm! This varies from vehicle to vehicle, but I know that on these 5th gen 4Runners, the front diff and t-case breathers are already run up into the engine, leaving only the rear diff vulnerable! Good luck with the install!
Two questions, when you installed the filter block the tube went straight up but when you added the filter it was not there. Did you invert the block? Second question, what about the front diff, does it have a breather?
Hey man! Yeah I flipped it around just to make things a little bit cleaner on the routing. And yes, the Front Diff and Trans have breathers that are already routed up into the engine bay, so no need to do anything there!
Super easy to follow along with, great video! Question: The hose that comes in this kit is super rigid and I’d rather plug it into one of the bottom holes of the manifold rather than it being bent into a top hole. Would there be any issue with that? I can’t imagine it matters... Thanks!
Hey Andrew! I know we connected already, but just so other folks can find the answer they need: Shouldn't be an issue at all! I did end up flipping things around in the final install to use the bottom holes, and haven't had any issues!
Looks like a fun project. I have not looked into it yet, but how many needed for a 5th gen 4runner, 3? Front and rear plus transfer case? Getting confused dealing with my tacoma and my wifes 4Runner. The Tacoma is a mess trying to find em all.
way to expensive, go to auto zone and buy the parts. Couple feet of hose and a small filter. Buy the union from Amazon. Everything will cost you under 20 bucks.
Definitely a good option! Like I said, totally easy to piece this together yourself and save some cash! The convenience of the kit and peace of mind with the quality air filter from ARB is what sold me on it! But to each their own!
Yeah, like I mentioned, that's definitely a good option to save some cash! The hose in my kit seemed to be a similar quality to anything else I'd be able to pick up, but I will keep an eye on it and update things if it wears out prematurely! Thanks Jeremy!
![เปิดบ้าน โคตรสวย ป๋องกพล รู้จักตั้งนาน เพิ่งรู้ว่ารวย!!! l [Nickynachat]](http://i.ytimg.com/vi/tmgCF_2HfYI/mqdefault.jpg)
This install is a great project for an easy Sunday afternoon! What projects are on your list?
This one now! 👍
For some ease you can also just run the line up into the left rear corner where he got his “long rod” from. You can mount the filter almost as high. Most of us won’t be submerging our tailgate.
Hey that's a great point, definitely easier to just run it up there. Thanks!
@@BenStinnett apparently they say to route it up front so when it purges the fumes wont go in the cab. Anyone who has done the hack in the back hasn’t complained tho. I’m going to put it in the back. I’ll comment if I notice fumes.
To this day we don't know if he got too many fumes🤪
@@Rooster_king It was kind of a PIA to route it up there in back so I ended up running to the front.
@@amgeezy_2709 ok thanks I'm probably going to do the same
Nice, I'm gonna knock mine out...pretty sure even I can't screw this up. Great vid.
You got this bro 🙌
ARB version is great but there's a generic version on amazon that is half the price and just as good in quality... if not the exact same kit with 3rd party labeling. Awesome video!
Thanks for the info Sam! I'll have to check out that kit
Do you have a link to this generic version?
Your background music is soothing.
What kind of beer? That was the most important part for the job!
Thanks a lot dude! You made this look super easy. Ordering now and subscribed!!
Glad it helped, Tyler! Thanks for the sub!
Don't forget the front diff and the trans.
Hey Greg! Good catch, on the 5th Gen 4Runner, the front diff and trans actually already have their breathers up in the engine bay from the factory, no clue why they didn’t just do the rear diff too 🤷♂️
@@BenStinnett Also the Rear Locker if installed
Does the locker need a breather too on the offroad versions
If I recall correctly, the locker has a smaller diameter breather hose to a little one way valve. I’ve seen some folks on the forum cut the valve, install a barbed fitting, and extend the hose, but not strictly necessary imo. Hope this helps 👍
Does the front diff not need this? I’m only seeing vids of the rear diff getting this installed on.
I'm confused by the the point where you inserted the hose up under the hood. Before you installed the filter the hose was running vertical, then when installing the filter it had disappeared. Did I miss a step?
Nothing missed! I just ended up flipping the manifold 180 to make for a slightly better routing of the hose!
Please make a video going over what all you have done and plan to do to your 4Runner love the color and the wheels I want to start doing over landing but I only have my 2016 mustang lol so it won’t do too good but more videos and a build video love your channel!
Will do! But hey, you never know, throw a lift on that mustang and a roof top tent and you could be overlanding in no time! haha
Ben Stinnett I just told the fiancé that is what we should do lol
Thanks for this.
My pleasure! Thanks for watching Van!
Does the filter need to be installed in the engine bay? Could it be installed one of the rear compartment doors in the cargo area?
I realized my tube melted an inch hole/gash near exhaust pipe towards the front passenger side. Is there anyway I can relocate the tubing that isn’t damaged like for example, somewhere up in the rear?
Oh dang no way? Makes sense I guess the exhaust gets super hot. I would say just try to tie it off as high as possible. Most importantly, just keep that in mind before doing and sort of water crossings in the future!
@@BenStinnett thx ben!
"You'll probably want a beer handy too."
My man.
You know it!
Hello, new to all this off road stuff... I"m sold on installing this Diff Breather. My question are there front differential and transfer case breathers that also need to be installed OR anything else for that matter? Thanks
Hey Malcolm! This varies from vehicle to vehicle, but I know that on these 5th gen 4Runners, the front diff and t-case breathers are already run up into the engine, leaving only the rear diff vulnerable! Good luck with the install!
Two questions, when you installed the filter block the tube went straight up but when you added the filter it was not there. Did you invert the block? Second question, what about the front diff, does it have a breather?
Hey man! Yeah I flipped it around just to make things a little bit cleaner on the routing. And yes, the Front Diff and Trans have breathers that are already routed up into the engine bay, so no need to do anything there!
@@BenStinnett My kit just arrived. It on the to do list for the weekend. Thanks for the video!!
Barney style. Did you get that from a sci-fi book? I remember that line from the AI in expeditionary force.
Hey Nic! First time I heard was from a Drill Instructor back in boot camp during my time in the Marines! It’s stuck with me all these years!
Do I need to drop the spare tire? Or is it doable with it on still?
Super easy to follow along with, great video! Question: The hose that comes in this kit is super rigid and I’d rather plug it into one of the bottom holes of the manifold rather than it being bent into a top hole. Would there be any issue with that? I can’t imagine it matters... Thanks!
Hey Andrew! I know we connected already, but just so other folks can find the answer they need: Shouldn't be an issue at all! I did end up flipping things around in the final install to use the bottom holes, and haven't had any issues!
@@BenStinnett I appreciate you typing out the answer for late-comers like me!
@@BenStinnett Yea, was confused about routing it without kinking. This makes sense
Looks like a fun project. I have not looked into it yet, but how many needed for a 5th gen 4runner, 3? Front and rear plus transfer case? Getting confused dealing with my tacoma and my wifes 4Runner. The Tacoma is a mess trying to find em all.
@@Atlanta_Cyclist Oh wow. If so awesome.
Yup, Tony's got it right!
More puppy b roll plz
All the puppy footage!!!
Did I miss the solar panel install video on the iKamper? Hope all your gear gets some use sometime soon.
It's coming! I promise! haha. Have a couple of trips in the works now that things are opening back up!
More Milo please 😍
Prepare to see A LOT MORE of Milo 😍
Wow
last night i put my long stick in the right place..
way to expensive, go to auto zone and buy the parts. Couple feet of hose and a small filter. Buy the union from Amazon. Everything will cost you under 20 bucks.
Definitely a good option! Like I said, totally easy to piece this together yourself and save some cash! The convenience of the kit and peace of mind with the quality air filter from ARB is what sold me on it! But to each their own!
Just spend 15 bucks and do it yourself. The 70 dollar kits use cheap hoses. It will get brittle and break eventually. It's way over priced.
Yeah, like I mentioned, that's definitely a good option to save some cash! The hose in my kit seemed to be a similar quality to anything else I'd be able to pick up, but I will keep an eye on it and update things if it wears out prematurely! Thanks Jeremy!
Two and a half minutes and nothing but irrelevant jabber, jabber. Get on with it, man. I stopped to write this and then moved on.
Thanks for the feedback Bill. Can’t win ‘em all 🤷♂️
There are other videos of you don’t like this, move along and stop complaining