Great job, great content. Keep the videos coming master lim. We appreciate your expertise and hard work you put in making such informative videos. Thanks
Hey I need help with changing digitizer and an issue I am facing, unfortunately the quality of flex cables of digitizers for replacement parts are not as good as the flex cables on the original digitizers, and when fastening them and connecting them you don’t get the clicking noise to make sure the flex cable is connected properly, but the digitizer works but after couple of days the iPad digitizer flex cable comes of the motherboard and so the digitizer stops works, is there any way to sit or fasten the iPad flex cable so it does not come off the motherboard ?
@@iPhoneServiceMalaysia hey i dont think they need someone to steal it, resistances can be done with multimetre specially if there is a big team that would be easy for them to note every think .
@@Mradam912 without schematic, you never know the coil spec, capacitor spec, the line label name and what it's doing... it's not about measurement. That's how software tell you what's the line purpose and spec.
@@iPhoneServiceMalaysia hello again , ipad series doesn't have even risistance values i think they can measure that and put in schematics im not talking about component specs , and im sorry for arguing with you , you are master of your craft im just a beginner .
@@Mradam912 Well, an advice even a trained technician didn't know. Let say there is a pin is 350 from schematic. You found 380 or 300. So you suspect a problem or maybe just different multimeter. So the line name will help us to know it should be higher or lower. Example, i2c lines. This kind of measurement techniques are important. It's the unique lesson that only my course has it. Some pro they know it but they won't talk about it. or maybe a line that is 0.0025 that low. By looking at what's connected to, we will know it. Instead of blindly comparing to other board.
![[Full] 4 ต่อ 4 Celebrity EP.920 | 3 พ.ย. 67 | one31](http://i.ytimg.com/vi/KwiW2M_kAg4/mqdefault.jpg)
I’ve been watching your older videos over and over again last few days, and was wondering when you were gonna upload again. This was such a surprise 🎉
Me too, Waiting for his video. I Lean's lots from his videos. I'm planing to joining online course.
@@VK-ff6wb you absolutely should. I’m his student and it’s well worth what you pay.
Upload videos every day.
Thank you IPHONE SERVICE MALAYSIA 🇲🇾
Please upload more! Thanks for sharing useful and interesting information.
Sir, can i know which power supply and multimeter do you use for repairing?
Great job, great content. Keep the videos coming master lim. We appreciate your expertise and hard work you put in making such informative videos. Thanks
I have learn a lot from this video ,
Thank for the update and great job, may God all mighty bless you,,
Am speaking all the way from Cameroon 🇨🇲🇨🇲🇨🇲🇨🇲
Sir,mobile capacitor is have/no direction.we put any direction is ok or how to know right position of capacitor
I have learned a lot from this video
Hey I need help with changing digitizer and an issue I am facing, unfortunately the quality of flex cables of digitizers for replacement parts are not as good as the flex cables on the original digitizers, and when fastening them and connecting them you don’t get the clicking noise to make sure the flex cable is connected properly, but the digitizer works but after couple of days the iPad digitizer flex cable comes of the motherboard and so the digitizer stops works, is there any way to sit or fasten the iPad flex cable so it does not come off the motherboard ?
thank you for for the video master.hope soon you upload on how to trace in 1.8 volts short.
My iPod has the same problem is it repairable ?
mr. lim when is the next batch of the online class starts
Always I see you the best bro ❤
Where you have the motherboard on pc ?
Same issue solved by your guidance
👍🏻👍🏻
Best teacher...😍
bless your heart man I love this
hi master how much? schematic diagram and name your schematic diagram?
i love watching you video !
Great video Thank you
Master grear job... respect
we miss you
thanks
amazing vedio
Thanks thanks sir gerad worck.
Vanakam master🙏
I feel like this video ended too soon.... 😄
I hope every user of zxw would complain by a review or something about why ipads and some new iphones doesn't have more informations .
Because Apple does not release the schematic or no one to steal it from them.
@@iPhoneServiceMalaysia hey i dont think they need someone to steal it, resistances can be done with multimetre specially if there is a big team that would be easy for them to note every think .
@@Mradam912 without schematic, you never know the coil spec, capacitor spec, the line label name and what it's doing... it's not about measurement. That's how software tell you what's the line purpose and spec.
@@iPhoneServiceMalaysia hello again , ipad series doesn't have even risistance values i think they can measure that and put in schematics im not talking about component specs , and im sorry for arguing with you , you are master of your craft im just a beginner .
@@Mradam912 Well, an advice even a trained technician didn't know.
Let say there is a pin is 350 from schematic. You found 380 or 300. So you suspect a problem or maybe just different multimeter.
So the line name will help us to know it should be higher or lower. Example, i2c lines.
This kind of measurement techniques are important. It's the unique lesson that only my course has it. Some pro they know it but they won't talk about it.
or maybe a line that is 0.0025 that low. By looking at what's connected to, we will know it. Instead of blindly comparing to other board.