I hope people will read my comment. Don't expect the stock mb03 to be great accurate and reliable. It's a decent base to start off with. I've put all action army parts in mine. The hop up bucking is a maple leaf diamond. If i would start over i would buy a jg bar10 in stead just for compatibility . The well is kinda vsr 10 compatible but needs some small changes to fit vsr upgrade parts. You definitely need a Dremel when you want to replace parts. The JG bar10 should be 100% vsr compatible without any adjustments to fit parts. It's a nice project for learning how to improve your rifle. If you like to put some time in it like I did the mb03 is what you need. If you don't, the jg bar 10 should be more plug and play in about the same price category. *The mb03 outer barrel is longer and you'll have to make your own barrel spacers because of te widening chape. Take a normal Vsr10 inner barrel, it will be roughly 7cm shorter than the original mb03 barrel. That 7cm will make a louder noise from exiting air like an amplifier. I've put foam rings in it to work like a silencer. Or you get a longer inner, buy an adapter to replace the original (orange) tip and put on a silencer to cover the exiting inner barrel. An other option in to cut the inner barrel down to original size. *You'll have to dremel the opening for the spring guide stopper pin. It's about 2mm too far to the front. Plus the slide where the pin falls into in the triggerbox is too narrow to fit. *You'll have to dremel a bit of the slide where the bolt handle comes down. You already saw even with stock parts it doesn't fall down smoothly . He had to force the bolt down 2 times during the review. * you'll have to drill the hole of the bolt handle +2mm to fit a non stock cilinder. * triggerbox is sort of okay but the sears are weak material. Definitely need to change them after 500 shots.
I been doing a ton of research and everyone swears that the lighter the better. The polymer on this gun is very high quality. It also feels really good in my hand. I am just like you I prefer all metal guns but not for snipers. I bought an all metal sniper and it was so heavy and impractical to use on the field. If I were I would go with polymer. Also all the moving stuff in the gun is metal and that is what matters at the end of the day. I hope I answered your question.
I feel uncomfortable, he keeps stroking the barrel.
You just helped me decide on my first sniper thx +1 sub
Me too xd
King of the anime me too lol
Thanks so much for this review. I'm new to airsoft sniping and I'm definitly gonna pick this one up for my first sniper. Just got another sub +1
I hope people will read my comment. Don't expect the stock mb03 to be great accurate and reliable. It's a decent base to start off with. I've put all action army parts in mine. The hop up bucking is a maple leaf diamond.
If i would start over i would buy a jg bar10 in stead just for compatibility . The well is kinda vsr 10 compatible but needs some small changes to fit vsr upgrade parts. You definitely need a Dremel when you want to replace parts. The JG bar10 should be 100% vsr compatible without any adjustments to fit parts.
It's a nice project for learning how to improve your rifle. If you like to put some time in it like I did the mb03 is what you need. If you don't, the jg bar 10 should be more plug and play in about the same price category.
*The mb03 outer barrel is longer and you'll have to make your own barrel spacers because of te widening chape. Take a normal Vsr10 inner barrel, it will be roughly 7cm shorter than the original mb03 barrel. That 7cm will make a louder noise from exiting air like an amplifier. I've put foam rings in it to work like a silencer.
Or you get a longer inner, buy an adapter to replace the original (orange) tip and put on a silencer to cover the exiting inner barrel. An other option in to cut the inner barrel down to original size.
*You'll have to dremel the opening for the spring guide stopper pin. It's about 2mm too far to the front. Plus the slide where the pin falls into in the triggerbox is too narrow to fit.
*You'll have to dremel a bit of the slide where the bolt handle comes down. You already saw even with stock parts it doesn't fall down smoothly . He had to force the bolt down 2 times during the review.
* you'll have to drill the hole of the bolt handle +2mm to fit a non stock cilinder.
* triggerbox is sort of okay but the sears are weak material. Definitely need to change them after 500 shots.
Worked on about 10 mb03/02 and never needed a dremel. you can upgrade it with as low cost as 10$ and get 80 no problems.
Great Gun. Bought it and upgraded the spring. C an't beat the quality for the price. Thank you for the video.
got mine from evike as well. got the black package deal. also put in a noveritch tuning kit the front end of the barrel is threaded on the inside
Next time, distance? " I'm kind of far away". For review purpose, I would have broke out the tape measure.
His just a bad shot and dosnt want to look like a fool he was prob 10M away
Best vsr build platform. I’m hitting 100m man sized targets with mine after mods.
@Rattlesnake 006 hop-up, barrel, spring (probably)
Great work brother, you deserve more subscribers +1
Cant you get just a little bit closer? its not blurry enough yet
So what’s the difference between vsr10 and the matrix
Just got this it's a good sniper .
Ali Youngg what size bb do you use for this
I love this video, so much Effort. Keep it up
Thank you I appreciate it. I am working on a video now but its taking way longer then expected.
can i get it at fleet farm?
The clouds are blocking the sun and that's what's making wind ?
Jon Calman lmao
How is the polymer quality, I can’t decipher whether to get a this or a metal sniper. I’m looking for durability and realism.
I been doing a ton of research and everyone swears that the lighter the better. The polymer on this gun is very high quality. It also feels really good in my hand. I am just like you I prefer all metal guns but not for snipers. I bought an all metal sniper and it was so heavy and impractical to use on the field. If I were I would go with polymer. Also all the moving stuff in the gun is metal and that is what matters at the end of the day. I hope I answered your question.
Polymer
tokyo marui L96
My hop up is hard to move it only clicks 2 times or 3
Can you use the bullets over and over again?
Usually when the bb's hit something they can deform or break so i recommend not reusing them cause they could jam the gun
Why would you though
@@perpetualconfusion5885 probably to save some money on BBs, lol.
Where did you buy it from
I purchased it on evike.com
Can i use
(the identical) Magazine from the Cyma 701? (With 50bbs Space?) although a vsr 10)
The hop up on my matrix vsr10 is hard to slide
I haven’t tried sliding it back because I think i am going to break it
I thought it came with 3 mags ?
Not when I bought it back in 2018
Beautiful
could you tell me how long is the longer screw becouse i got 2 short screws instead 1 short and 1 long
How do you know they’re short if there’s nothing to compare them to
would .32g work with this gun
Use that at the minimum.32-.43
good 10fps video quality
couthocean82166 quality isn’t recorded in FPS
it comes with scope?
no, you have to buy it
you can buy the scope and bipod in one of the package options. It's a bit more $$$, but worth it.
What target is that? I’m looking at getting a new one and that looks pretty good
Ellixit crossman astlg
+1 sub
Well aps sr-2 is more accurate and powerful and i use .25g bbs bio and it works the best
Buy the sr-2 rather buying this vsr-10
Welp...thats not about card games
No this is an airsoft video.
You said some incredibly stupid things in this video but nice review nonetheless