I told a structural engineering company to let me intern with no pay and evaluate me after 6 months. I had no experience in this field, watching your videos helped me soo much? Now I’m hired and about to get a raise!
Amazing! Just what I have been looking for! Also, do not delete the design options till the project has ended. Most clients have a tendency to jump back to other options at any given point of the project no matter how much progress has been made xD
Exactly, everyone suddenly remembers the previous option, they're like, wait a minute, the old option was better than this experiment, some times it's just a waste of time imho.
Hello, I have a question: what if I starded to change my model in these 2 optionsm but then I want to have a third option. How can I assign the same elements to work on to the 3rd option? I can't select those element from the main model.
problem is when adding rooms and for example making different facade designs, walls and rooms will start overlapping and revit will behave badly, as well as the inability to add certain categories to design options
Or, rather, what was the purpose of moving over the blue dot from the corner of the represented tv stand on screen to the ref plane center line? Thanks.
This is a bit basic now. It would be good to show how to work rooms within design options as they can cause conflicts, so is the walls, doors windows can’t be copied over or anything that is can be hosted. It would be good to explain room schedule for different design options and how you set up printing sheets showing different design options. And how to delete redundant options while leaving chosen option
Videolariniz cok yardimci oluyor tesekkur ederim. Lutfen aciklamaniz mumkunse. Design option ekledikten sonra yeni bir tane eklemek Istersem elementleri iceri nasil ekliyorum Ve scopebox design option actiktan sonra yaratirsam onu design setin icine nasil ekliyorum? Tesekkur ederim
Thanks for this helpful video. I have only one question, is it somehow possible to see multiple design options at the same time without having to select them separately to see them. Sometimes you need to show clients several variants on one sheet. When a new sheet is created, only primary design options are displayed in it. Thanks in advance :)
So for the design options, it seems that you are using the same components, but just rearranging them. So when you delete the design options that are not chosen by the client, you are not deleting the components - just the unwanted arrangements? I assume also that the chosen design option would have editable components? Thanks in advance.
Hi, I'm new to revit. I have a question for you. Let's say I have a data outlet. You can write it manually for its height from the floor.It is not linked to wall. I attach it to the wall so that there is no gap. When there is an architectural revision, the wall slides and my element moves away from the wall. How can I see the all elements distance from the wall in a list? (There are about 2000 data sockets in the project) I don't want to look at the proximity of the wall in 3 dimensions one by one.I would be very happy if you could help...
For this, and to display the options as Alternates on a sheet you can go into the viewport created for your design option and open the Visibility Graphics panel.(be sure the "main model" is what is being viewed so theres no greying out) from there select the "Design Options" tab at the top, it will likely be set by default to automatic, select the drop-down and change this to your desired option you want to view. And hit apply. And there you have it, the design option should be shown without affecting any other views and without greying out your drawing.
Hey! I wanted to know if I subscribe to your courses will I be able to save them and access them on my computer any time I want or is this option only available by downloading? Many thanks
@@balkanarchitect and what if I chose to download the courses individually? Are they all video courses or written tutorials. I feel like I learn way better through video
Thank you for this informative tutorial as always.. I'm just wondering, can I use this Design Options as progress on Drawing Revisions.. I hope you could give me advise... Thank you and More Power..
I told a structural engineering company to let me intern with no pay and evaluate me after 6 months. I had no experience in this field, watching your videos helped me soo much? Now I’m hired and about to get a raise!
Amazing! Just what I have been looking for!
Also, do not delete the design options till the project has ended. Most clients have a tendency to jump back to other options at any given point of the project no matter how much progress has been made xD
Exactly, everyone suddenly remembers the previous option, they're like, wait a minute, the old option was better than this experiment, some times it's just a waste of time imho.
Love the video effects
I've just started learning Revit and Your videos are really great and helpful for me ! thank yooooooou!
real cool tutorial! thanks
I never knew this before, amazing
Thank you for always uploading insightful videos
all the best to you
Hello, I have a question: what if I starded to change my model in these 2 optionsm but then I want to have a third option. How can I assign the same elements to work on to the 3rd option? I can't select those element from the main model.
Awesome!
Very useful vid BA, thanks.
NICE VIDEO!!!
I used it on a project before.. it is very useful
problem is when adding rooms and for example making different facade designs, walls and rooms will start overlapping and revit will behave badly, as well as the inability to add certain categories to design options
No comment balken???
Thank you sir!
hi. how do you accomplish the auto adjustment to the reference plane after about @9:50? What was the keyboard shortcut/command for that?
Thank you.
Or, rather, what was the purpose of moving over the blue dot from the corner of the represented tv stand on screen to the ref plane center line? Thanks.
This is a bit basic now.
It would be good to show how to work rooms within design options as they can cause conflicts, so is the walls, doors windows can’t be copied over or anything that is can be hosted. It would be good to explain room schedule for different design options and how you set up printing sheets showing different design options. And how to delete redundant options while leaving chosen option
Hello! Very informative, but may I ask how do you print the design options? If you want to present the options to the client in a PDF file
Very useful thanks👍😊
Good stuff...
so how do you put both the options in one single sheet?
i cant use text in design option . i see the texts in all my design ooption
As always, your videos are amazing.. Thanks a lot.
Btw how did you rotate the floor pattern so easily by selecting a line?
Videolariniz cok yardimci oluyor tesekkur ederim. Lutfen aciklamaniz mumkunse. Design option ekledikten sonra yeni bir tane eklemek
Istersem elementleri iceri nasil ekliyorum
Ve scopebox design option actiktan sonra yaratirsam onu design setin icine nasil ekliyorum?
Tesekkur ederim
Thanks for this helpful video. I have only one question, is it somehow possible to see multiple design options at the same time without having to select them separately to see them. Sometimes you need to show clients several variants on one sheet. When a new sheet is created, only primary design options are displayed in it. Thanks in advance :)
So for the design options, it seems that you are using the same components, but just rearranging them. So when you delete the design options that are not chosen by the client, you are not deleting the components - just the unwanted arrangements? I assume also that the chosen design option would have editable components? Thanks in advance.
Hi, I'm new to revit. I have a question for you. Let's say I have a data outlet. You can write it manually for its height from the floor.It is not linked to wall. I attach it to the wall so that there is no gap. When there is an architectural revision, the wall slides and my element moves away from the wall. How can I see the all elements distance from the wall in a list? (There are about 2000 data sockets in the project) I don't want to look at the proximity of the wall in 3 dimensions one by one.I would be very happy if you could help...
thanx
Is it useful or practical for designer ? Please.
hello - do you have any specials on your site? I want to do the monthly subscription, but I thought that included the two template files.
Sir can we change door/ windows with this design options. Please reply...
Can this work if we want to propose different area plans?
Great video ! and about this cool design option ... have you had heard about that bim chick lately ? : )) or you guys just got cold one to another ?
can we turn off the greying out of non-primary options? exporting pdfs with correct graphics would be faster
For this, and to display the options as Alternates on a sheet you can go into the viewport created for your design option and open the Visibility Graphics panel.(be sure the "main model" is what is being viewed so theres no greying out) from there select the "Design Options" tab at the top, it will likely be set by default to automatic, select the drop-down and change this to your desired option you want to view. And hit apply. And there you have it, the design option should be shown without affecting any other views and without greying out your drawing.
@@pendrick94 thanks i missed this in the tutorials !
Good day balkan architect, please can you do a tutorial on how to model on a curved surface?
Hey! I wanted to know if I subscribe to your courses will I be able to save them and access them on my computer any time I want or is this option only available by downloading? Many thanks
Hi, you can only watch the courses online on the website, there is no option to download them. :)
@@balkanarchitect and what if I chose to download the courses individually? Are they all video courses or written tutorials. I feel like I learn way better through video
Thank you for this informative tutorial as always.. I'm just wondering, can I use this Design Options as progress on Drawing Revisions.. I hope you could give me advise... Thank you and More Power..
Yes you can use
How i can contect you sir
you can contact me when you sign up on my website (it's free to sign up) 🙂
Chris Salomone
Aaaaaaaaaand Subscribe :-D thnaks :-D
boring client hahhahhah