Selection and Sizing of Pressure Relief Valves
ฝัง
- เผยแพร่เมื่อ 25 ส.ค. 2024
- There are numerous types of pressure-relieving devices and systems, both re-closing and non-re-closing (rupture discs). This Webinar contains technical information limited to pressure relief valves. The primary purpose of a pressure relief valve is the protection of life and property by venting fluid from over-pressurized equipment. Information contained in this Webinar applies to the overpressurization protection of pressure vessels, lines, and systems.
For more information contact us
www.citadel-engineering.com
واقعا ممنون محشر بود محشر سپاس
thanks for good presentation
45 mins of reading slides?
Didn't find a single equation while you had equation nomenclature and even somewhere referred to table 2 and eq. 8 &9!
If there's a supplementary book for this webinar, where's the download link?
Gooooood
Thank you for this presentation. If you are open to constructive criticism to make your presentation more beneficial to your listeners, then read below:
1. Approximately 80%-90% of your presentation is simply reading from the slides. Once you told us what the standards for PRDs were, we can simply read the standards ourselves. Your pictures, demonstrations, and experience are what we can't get from the standard, and those are most valuable.
2. It would be greatly beneficial to go through a real life scenario for PRD selection and sizing; Walk us through what information we need to give to our suppliers to help us size and select a proper PRD. Are there useful tools, like excel calculators, that help with calculations?
Regardless of the above comments, thank you for taking the time and for putting in the effort to produce this webinar. I got a lot of information from it.
محشر بود محشر
NON SENSE PRESENTATION. THOSE WITH EXPERIANCE WILL KNOW IT IS BU..HIT