Sprinkle of love You are the best. No one explains the way you do. Thank you for taking the time out to educated us. The detail in your videos is amazing. I am going to try this.
Absolutely!! I will continue to watch and be better about commenting 😊. A little encouragement goes a long way in these TH-cam streets. Would love to see you on IG too because that’s where I’m most active. Eventually I’ll venture to TikTok 😂
Great job on your video, I enjoyed watching! You were very informative! You make it look so easy, I will attempt to do a big balloon arch like this for my son's 1st Birthday. Wish me luck! 😬
I like how you explained every step very well and easy to understand. I will be attempting to recreate a similar balloon arch for my daughter's baby shower. Wish me luck, as this will be my very first time doing this.
So it doesn't wave to the extent that those cheap Amazon stands do. The pvc pipe is more rigid than those thin poles so it doesn't move nearly as much. Left that stand out over night and it was fine. Just make sure it's secured at the bottom.
How were you able to put the balloons all the way to the bottom and hide the cinder block without them getting in the way also, did you use anything else besides the cinder block?
This is so helpful!! Thank you for the tutorial. May I ask how you price your arches? I am starting out and I have a client wanting a large arch for their outdoor event. Do you have base prices for different arch size? Or charge per foot? I am trying to do research because I am not sure!
Are you trying to make a balloon arch or a column? If you're making a column, you can get a longer steel pipe (6 ft) and screw it in the flange. If you're trying to make an arch, you need the electrical pvc for support at the top
I already made two of the stand-alone columns from your video using 4 ft galvanized steel pipe and 2 10ft white flex pipe. Can I use those stands and buy #2 of the gray pipe to make an arch?
I tried using the gray electrical pvc pipe, and the hole in the pvc wasn't big enough to go over the steel pipe. The one inch pvc wasn't even big enough for the 3/4 inch steel pipe. Perhaps if you find one over 1inch it might go over but I'd test it first before buying
Very nice! How did you keep the screws in the base from pooping the balloons? Also, how did you cover the cinder block with balloons? If the cinder blocks were removed, what did you use to weigh it down?
Thanks. The cinder blocks are in the back of the base. If your base is big enough you'll have room to fit the cinderblocks on there with the balloons. There are other weights you can use. For example, weights from dumbbells. You can slip them onto the base before putting the pvc pipe onto the emt pipe. Just be careful when putting the bottom quad of balloons on the base to make sure the balloons don't rub against the screws.
Hello. I charge $20/ft (18ft min). The length is how long the balloon garland extend when laid down in a straight flat line, not the actual height of the arch.
These balloons were used before in a client setup. Instead of popping them, I side untied the balloons, deflated them, then reused them for this tutorial I did at home
If it was for non commercial use and indoors I think and Amazon arch stand would be OK. Outdoors or for commercial use I would not recommend. I bought one from efavormart before and the pole was too flimsy in my opinion
You are a wonderful teacher.
Thank you 😊
Love it! Very well explained
Best DYI video I have come across. You are very thorough. You just gave me the confidence to try this myself. Thank you 🥰
Awesome! You can do it! Best wishes!
Awesome display!
Thank you 😊
Great diy for the stand
I'm glad you found the content helpful 😊
very helpful... i couldn't thankyou enough for making it look so easy
@@essiemaldonado289 you're welcome 😊. Im glad you found the content helpful
The detail in your videos are amazing. Its hard to go wrong after watching your videos. Thank you!
Thank you so much Yvette 💓. Im glad you found the content helpful
Thank you for actually showing the supplies you used to make the arch. This turned out great
You're welcome 😊
This was so helpful! Thank you for including so much detail!
You're welcome 😊. Thanks for watching
This was so descriptive & thorough. Great tutorial!!
@@ajoimcfarland8747 I'm glad you found the content helpful 😊
Sprinkle of love
You are the best. No one explains the way you do. Thank you for taking the time out to educated us. The detail in your videos is amazing. I am going to try this.
I'm glad you found the content helpful 😊
I always enjoy your videos 💚🫶🏽. I may not comment on every single one, but I definitely watch every single one! Thank you so much for sharing!
Awww. Thanks Mimi 😊. Thanks for watching and supporting the channel.
Absolutely!! I will continue to watch and be better about commenting 😊. A little encouragement goes a long way in these TH-cam streets. Would love to see you on IG too because that’s where I’m most active. Eventually I’ll venture to TikTok 😂
I love how you explain step by step
Thanks for watching 😊. I'm glad you found the content helpful
So thankful for you❤😮
You're welcome 😊
So neat, clean! and pretty! I love your channel! Thankyou!
Thank you for watching 😊
I’ve always done it one quad at a time, I didn’t even know there was a different method!
Yes ma'am.
Great job on your video, I enjoyed watching! You were very informative! You make it look so easy, I will attempt to do a big balloon arch like this for my son's 1st Birthday. Wish me luck! 😬
Thanks for watching! Best wishes on making your first balloon arch!
I like how you explained every step very well and easy to understand. I will be attempting to recreate a similar balloon arch for my daughter's baby shower. Wish me luck, as this will be my very first time doing this.
Glad you found the content helpful 😊. Best wishes!
I loved watching this, & other, videos you have! The details are important!!!
Thank you 😊. I'm glad you found the videos helpful
This video is so helpful, I’m going to try this for a party this month
I'm glad you found the content helpful
Hey Valencia!!! 👋🏽
Great tutorial!!!!!!!
Thank you for sharing
Thank you Donatella 😊
@@valsballoonsandbusiness you're welcome!
Love it ❤
Thank you ,, your videos are very helpful ❤
You're welcome 😊
Thanks.. Am gonna make this very soon 😅😅😅
I Love This ❤
🤗
Thank you so much!!!♥️🌸♥️
You're welcome 😊
Love it! Thank you!
Thanks for watching 😊
Gorgeous ❤
Thank you 😊
Helpful video! If I don't have the time to make my own stand, which one do you recommend purchasing that is sturdy for outdoors? Thanks!
www.ubackdrop.com/products/10x8-ft-aluminum-balloon-arch-frame?+&+&gad_source=1&gclid=CjwKCAjwtNi0BhA1EiwAWZaANE948Mu2KVkRCPJwS4-_B8MrqO4aWKmpk9Y-MRykznSJ6mrmy_EfBRoClu4QAvD_BwE
I love it!!!
Thank you 😊 💓
Omg thank you so much ❤
Thank you 😊
Love your tutorial of how to build this stand ! Do you find that it stand up to regular wind days well? Like doesn’t move or wave alot ?
So it doesn't wave to the extent that those cheap Amazon stands do. The pvc pipe is more rigid than those thin poles so it doesn't move nearly as much. Left that stand out over night and it was fine. Just make sure it's secured at the bottom.
Beautiful 😍
Thank you 😊
How were you able to put the balloons all the way to the bottom and hide the cinder block without them getting in the way also, did you use anything else besides the cinder block?
@lorrainekoch5331 I put the cinderblock in the back. If you make the base of the stand wide enough, it should fit the balloons and the blocks
❤❤nice 🙏
Thank you 😊
This is so helpful!! Thank you for the tutorial. May I ask how you price your arches? I am starting out and I have a client wanting a large arch for their outdoor event. Do you have base prices for different arch size? Or charge per foot? I am trying to do research because I am not sure!
Hello. For an outdoor arch like this , I start out at $18/ft with an 18ft long minimum
This is so beautiful!! Do you recommend to put any balloon shine for outdoor arrangements? If so, which one do you prefer? Thank you!
Thanks. Yes, I use balloon shine outdoors. I use Hi Shine Balloon Shine, but I'm going to be trying a new one called mega Shine soon
Could I do the stands the way you did the stand alone? Just screwing on 4' galvanized steel pipe onto the flange?
Are you trying to make a balloon arch or a column? If you're making a column, you can get a longer steel pipe (6 ft) and screw it in the flange. If you're trying to make an arch, you need the electrical pvc for support at the top
I already made two of the stand-alone columns from your video using 4 ft galvanized steel pipe and 2 10ft white flex pipe. Can I use those stands and buy #2 of the gray pipe to make an arch?
I tried using the gray electrical pvc pipe, and the hole in the pvc wasn't big enough to go over the steel pipe. The one inch pvc wasn't even big enough for the 3/4 inch steel pipe. Perhaps if you find one over 1inch it might go over but I'd test it first before buying
Thank you so very much again. I really appreciate you
You're welcome
What’s the thickness of the wood
Use 1/2 in plywood for the base
Yeah I am at Home Depot & the plywood has different thickness 😀
As long as it's 1/2 in or thicker you should be good 👍. Sometimes it says 15/32 or something like that
I need to make 100 feet arch doing ball playground. Please help me I’m in the pipes you need for that.
Google the Aeropole system for balloon arches. They're pricey but worth it, I heard
what is sempertex 260 rope that you tied the balloons together with?
260q balloons are the long stretchy balloons you make balloon animals out of
Very nice! How did you keep the screws in the base from pooping the balloons? Also, how did you cover the cinder block with balloons? If the cinder blocks were removed, what did you use to weigh it down?
Thanks. The cinder blocks are in the back of the base. If your base is big enough you'll have room to fit the cinderblocks on there with the balloons. There are other weights you can use. For example, weights from dumbbells. You can slip them onto the base before putting the pvc pipe onto the emt pipe. Just be careful when putting the bottom quad of balloons on the base to make sure the balloons don't rub against the screws.
@@valsballoonsandbusiness thank you so much😃!! I am sorry for the delay in responding - I just saw your response. Really appreciate the guidance!
You're welcome 😊
You mention using weight to hold the base on windy days. What kind of weight do you use?
I used cinder blocks, but there are weights specifically made for backdrop poles with openings that go around poles
Awesome job. So, an arch like this how much can a charge to a client, I've no clue, i just started
Hello. I charge $20/ft (18ft min). The length is how long the balloon garland extend when laid down in a straight flat line, not the actual height of the arch.
@@valsballoonsandbusiness I am so new to this, but I really appreciate the info. God Bless!
How many balloons did you use on this arch?
Very Helpful! ❤ May I ask what you charge for your Balloon Arches ?
Balloon designers typically charge $20-$30 per linear ft
How are they recycled balloons ?
These balloons were used before in a client setup. Instead of popping them, I side untied the balloons, deflated them, then reused them for this tutorial I did at home
Hi, amazing video! What was the over all total cost for this stand? ♥️
Thank you 😊. The stand cost about $80 to make
@@valsballoonsandbusiness okay perfect, thank you so much!! I am going to be making one so kind of wanted to get a price point idea 😃
You're welcome 😊. Glad you found the content helpful
@@valsballoonsandbusiness found you on IG 😃♥️ beautiful work!!
Thank you 😊. Thanks for the support
Would you recommend Amazon’s balloon arch stand?
If it was for non commercial use and indoors I think and Amazon arch stand would be OK. Outdoors or for commercial use I would not recommend. I bought one from efavormart before and the pole was too flimsy in my opinion
Thank you , this video was SO helpful 🎉
You're welcome 😊. Glad you found the content helpful
Do you use this arch stand you made?
Yes
Do you make these for customers to keep?
Hello. The customers do not keep the arch stand
Hi, what are the dimensions of this arch?
Hello. Its 8 1/2 by 10ft