Server PSU Hack - ACBEL FSA021 IBM 39Y7228, 12VDC 38A 460W
ฝัง
- เผยแพร่เมื่อ 22 ม.ค. 2025
- A guide on how to make the, ACBEL FSA021 IBM 39Y7228, server power supply run outside of its server enclosure. A simple bridge between pin 1 and 2 is required.
Discussion and schematic: highvoltagefor...
Support the channel, join as a member here: / @kaizerpowerelectronicsdk
↝↝ Additional information and links ↜↜
★ Partners: @arcattackmusic and @franzolielectronics
★ Music by Mikas: / mikasdk (used with commercial permission)
★ T-Shirts, mugs and other merchandise: teespring.com/...
★ Electronics website: kaizerpowerele...
★ Facebook: / kpedk
★ High Voltage Forum: highvoltagefor...
★ My Slow motion videos channel: / @slowmotionvideosdk
★ Find me at Odysee: odysee.com/@Ka... and odysee.com/@Sl...
★ Find me at LBRY: lbry.tv/@Kaize...
$ For commercial/non-commercial licensing of material, contact through here: kaizerpowerelec...
♥ Donations. Please consider one of the following:
♥ Donate via Paypal: fleex@disorder.dk
♥ Donate crypto currency directly on these addresses (Check if there is minimums before transfer):
• BTC (0.0001 minimum): 3FtSz4svHxLYw4BNHWetSm65yajUZNb8CY
• ETH (0.05 minimum): 0x911d11766d3ab8efc829eb5f218f3b83dba12efa
• LTC (0.01 minimum): LLbTw63Mks4CmeWmkt2jChJfvrWHheH8T7
• DOGE (no minimum): DMRRa8uRH19tYWZ9GVHijpZYgRTecNVLFo
• SHIB (400 minimum): 0x8c1ed98c6c842467d782d2f865ed6d7adb8dfb4b
#electronicscreators #psu #hack
Excellent. Thank you. I have about 50 of these ranging from 500 to 1.3KW from server and switch gear
Get cracking! :)
@@KaizerPowerElectronicsDk yes sir
@@KaizerPowerElectronicsDk how about acbell FSA011?
@@KaizerPowerElectronicsDk
Acbel FSA011
switch power on.. Pin 1 & pin 2 too ?
Time to find out if these have the same pinout as the AcBel used in Apple Xserve!
Please do report back!
@@KaizerPowerElectronicsDk I've only tested the power distribution board, but shorting pin 10 (on the non-insulated side of the PCB) to ground turns on the dual power supplies. Couldn't have done this without your video - thank you! :)
@@Jamie Great to hear that it worked!
Hi, any chance you can give me a hint on why idle power is 40w... i do not see it as correct
I would guess that these are not optimized for idling. There is no scenario where a server power supply is not loaded, when in use. Might not be fully loaded, as they are properly running in a N+1 configuration, but not idling.
Can it be modified to battery charger?
It depends on the battery charge controller you are going to use, what input voltages can it take?
@@KaizerPowerElectronicsDk What i meant, is transforming PSU into lab bench power supply with cc/cv mode. There is already chinese solutions for that. But process of reverse engineering random PSU and adding this functionality would be very interesting to see.
Bạn dùng điện trở bao nhiêu ohm vậy?
Its shown in video and schematic in link, in description.
South of Denmark they say: Wer misst, misst Mist. But hey no 13.8V ? Time to down some Oel???