Why we using more than 2 or 3 resistance in a single PC boards if you see any mother board you can absorbed all resistance and capacitors are always not in singular why? Like this arrangement?
நீங்கள் மிகவும் அழகாகவும் பொறுமையாகவும் எங்கள் தாய் மொழியில் பேசுகின்றீர்கள். நன்றிகள்.👍💯👌 தயவுசெய்து உங்களால் ஒரு கணனியின் (மடிக்கணனி இல்லை) மேசைக்கணனியின் ATX மின் வழங்கியை(சரியோ தெரியாது) திருத்துவதை மிகவும் விபரத்துடன் என்ன பொருட்கள் பாவித்துள்ளது என்பதனையும் தெரிவித்து பதிவேற்றம் செய்வீர்களா???படங்களுடன் இருந்தால் இரட்டிப்பு மகிழ்ச்சியாக இருக்கும்.
velmurugan subramaniam Biasing a diode means applying voltage to it so that charges inside it can be made to move towards a particular direction. That is charges will be based towards one side only. When +Ve voltage is applied on p side and -Ve on n side ,it is called as forward biased then flow of majority careers are supported by applied voltage and current will flow from p to n side. Hence diode will be conducting in forward biasing. In reverse biasing voltage polarity will be opposite that is +Ve on n side and -Ve on p side. This would make voltage as an opposing force in flow of majority careers and hence no current would flow from p to n . But voltage polarity is such that it is biased towards minority careers hence a little current will flow from n to p.
jermans kingsly positive temperature coefficient thermistor, the higher the temperature, the greater the resistance. For negative temperature coefficient thermistor, the higher the temperature, the lower the resistance
First Enna sonnega temperature increase aana resistance value increase aagum. Next temperature increase aana resistance value korayum nu which one is correct...
U'r expression is very clear, Thanks!
Enga EDC mam kuda resister ra padhi indha alavuku sollala
Explanation vera 11 bro
Very Good Boss...
அருமையான பதிவு
Brother electrical and instrument cable size epdi kandu pudikrathu athuku apram ethana type cable iruku
Super da nalla panni eruka
Resistor is connected in negative.it's good
அருமை, அற்புதம், எளிமை
nandri
super G 👍👌
Nice 👍
Bro nonlinear resistor pathi detailed video podunga
How to mesure the resistor in voltage
MOSFET and JFET explanation g pls
Super. Potentiometer appadi naa enna enga use Pannuvanganu sollunga bro
potentiometer used in varying speed of motor.
Reactance impedance etha pathi soluga
Super super bro
விளக்கம் அருமை
nandri.
Why we using more than 2 or 3 resistance in a single PC boards if you see any mother board you can absorbed all resistance and capacitors are always not in singular why? Like this arrangement?
Upload about thermocouple and red pt100
Good
thanks a lot bro
Anna enakku oru doubt......
Resister valiya current pogumbothu current decrease aagumaa illa voltage decrease aagumaa
current decrease aagum
நீங்கள் மிகவும் அழகாகவும் பொறுமையாகவும் எங்கள் தாய் மொழியில் பேசுகின்றீர்கள். நன்றிகள்.👍💯👌
தயவுசெய்து உங்களால் ஒரு கணனியின் (மடிக்கணனி இல்லை) மேசைக்கணனியின் ATX மின் வழங்கியை(சரியோ தெரியாது) திருத்துவதை மிகவும் விபரத்துடன் என்ன பொருட்கள் பாவித்துள்ளது என்பதனையும் தெரிவித்து பதிவேற்றம் செய்வீர்களா???படங்களுடன் இருந்தால் இரட்டிப்பு மகிழ்ச்சியாக இருக்கும்.
Why resistance has no polarity
What is star and delta connection ?
AC 240 volt current la erunthu 4 volt led bulb 💡 direct ah use panna ethna kilo ohm register thevai padum
Maria Rebin Maria bro LED DC LA THAAN WORK AAGUM
consection and valancy bandna ena bro?
brother oru doubt..... resistor kku enth side "in" entha side "out" endu epdi identify pannurathu?
polarity kidaiyaathu...
Register யை ஏன் மைனஸ் பக்கம் இடுவது...?
Thanks a lot Anna
Thanks to universe
Bro tell about biasing
Super bro
thanks bro.keep supporting us.
biasing na enna anna ?
velmurugan subramaniam
Biasing a diode means applying voltage to it so that charges inside it can be made to move towards a particular direction. That is charges will be based towards one side only.
When +Ve voltage is applied on p side and -Ve on n side ,it is called as forward biased then flow of majority careers are supported by applied voltage and current will flow from p to n side. Hence diode will be conducting in forward biasing.
In reverse biasing voltage polarity will be opposite that is +Ve on n side and -Ve on p side. This would make voltage as an opposing force in flow of majority careers and hence no current would flow from p to n . But voltage polarity is such that it is biased towards minority careers hence a little current will flow from n to p.
Bro led oru resistance illiayya
thermister is having negative temperature coefficient
ஜி எக்ஸ்பிளைன் பண்ணும்போது கொஞ்சம் ஸ்லோவா பண்ணுங்க புரியமாட்டேங்குது .
Super
thank you so much.keep supporting us.
Resister kum fuse kum yanna defense
எனக்கும் சந்தேகம் வந்தது
1 தடையி குறைத்து கொடுக்கும் பியூஸ் குறைக்காது அப்படியே வழங்கும்
Tolerance apadina yanna
Ethu kku innoru resistance add pantringa
Voltage and current enakku difference innum piriyala...
watch my old videos you get a clear understand about current and voltage.
Bro nengal sonathu thavaru thermister ,temperature increase agum pothu ,resistance low agum ,
jermans kingsly
positive temperature coefficient thermistor, the higher the temperature, the greater the resistance. For negative temperature coefficient thermistor, the higher the temperature, the lower the resistance
First Enna sonnega temperature increase aana resistance value increase aagum. Next temperature increase aana resistance value korayum nu which one is correct...
Thermister is negative co efficient
jermans kingsly
it has both positive and negative
Why to use the " Patheengha Apdina" these many time in your explanation? Is it really necessary? It is not annoying actually?
Super bro
thanks bro.keep supporting us
Super
Thank you. Keep supporting us.
super bro
thank you so much.keep supporting us.
Super ji
Thank you.keep supporting us...
Super sir
Thank you so much keep supporting us
Super sir